On 4/29/05, Anthony Mittaz <[EMAIL PROTECTED]> wrote: > Hello, I recently bought an Hauppauge WinTV PVR 150(not mce) on ebay and I > couldnt' get it work on my mythtvbackend. I'm also using a wintv pvr 250 > who is working like a charm... > > Here is my init dmesg > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.3 (p) loading > ivtv: Linux version: 2.6.11-1.14_FC3 686 REGPARM 4KSTACKS gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 250 card > ivtv: Found an iTVC16 based chip > ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 10 (level, low) -> IRQ 10 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > ivtv: i2c attach [client=tveeprom,ok] > tveeprom: Hauppauge: model = 32054, rev = B148, serial# = 2766571 > tveeprom: tuner = LG TP18PSB11D (idx = 48, type = 29) > tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: Tuner Type 29, Tuner formats 0x00000007, Radio: yes, Model > 0x00891518, Revision 0xe09ae4d7 > ivtv: Radio detected > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0x00, (1F) 0x40 > msp34xx: init: chip=MSP3418W-A2 +nicam +simple +simpler +radio mode=simple > ivtv: i2c attach [client=MSP3418W-A2,ok] > msp3410: daemon started > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 250 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes > total > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 2 using 80 52224 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 2 using 80 52224 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 5 > tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by ivtv i2c > driver #0 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > ivtv: i2c client addr: 0x43 not found! > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > ivtv: Initialized WinTV PVR 250, card #0 > > PVR 150!!! > > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 12 > PCI: setting IRQ 12 as level-triggered > ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 12 (level, low) -> IRQ 12 > ivtv: Unreasonably low latency timer, setting to 64 (was 32) > ivtv: XXX PCI device: 0x01e0 vendor: 0x10de > ivtv: i2c attach [client=tveeprom,ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > msp3400: error while reading chip version > dont like that
me neither > tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7768178 > tveeprom: tuner = <unknown> (idx = 97, type = 0) > dont like that me neither > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) > tveeprom: audio_processor = MSP3400C (type = 4) > ivtv: Tuner Type 0, Tuner formats 0x00000e07, Radio: yes, Model > 0x008d1657, Revision 0xe09c25eb > ivtv: Radio detected > ivtv: ivtv_enc_thread: pid = 1972, itv = 0xe09a3120 > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > cx25840: detecting client on address 0x88 > cx25840: writing init values > cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. > cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa > cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 > cx25840: Status: cx258423 (DEVICE_ID) > ivtv: i2c attach [client=cx25840[50],ok] > ivtv: i2c attach [client=wm8775[50],ok] > ivtv: Encoder revision: 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 5 streams > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes > total > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create DMA stream 1 > ivtv: Allocate DMA stream 1 > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 kbytes > total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 4 minor 65 > ivtv: Create stream 4 > ivtv: Allocate stream 4 > ivtv: Setting Tuner 50 > tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #1 > cx25840: decoder set input (6) > cx25840: Tuner Input > cx25840: set audio: 0x01 > ivtv: Switching standard to PAL. > ivtv: i2c client addr: 0x43 not found! > cx25840: decoder set norm PAL > cx25840: set audio: 0x01 > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV ==================== > > modprobe.conf > # ivtv modules videodev > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > #alias tveeprom tveeprom-ivtv > #alias msp3400 msp3400-ivtv > # Pal user > options cx25840 no_black_magic=1 > options ivtv ivtv_std=2 tuner=5,50 tda9887=0,0 > #options ivtv ivtv_std=2 tda9887=0 > #lircd > install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-istall lirc_i2c I have a 350/150MCE PAL setup, so pretty simular to what you have. Try with these options; try to let the driver auto-detect as much as possible. hopefully with these options you won't get the detection errors. I only got the "0x43 not found" errors when using no_black_magic and it was causing more harm than good but I have an MCE so don't know what it would do in your case. options saa7127 i2c_enable=1,-1 options wm8775 debug=0 options tuner pal=G debug=0 options ivtv ivtv_std=2,2 tda9887=0,0 ivtv_debug=1 options tda9887 pal=G debug=0 install ivtv /sbin/modprobe --ignore-install ivtv N. > Thanks a lot > anthony ------------------------------------------------------- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id5hix _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
