Hello,
I bought a pvr150 mce last week and am using it in a P2 350 Mhz system
running Debian Sarge. I gave up trying to get it to work it to work
using 0.2.0-rc3j, but 0.3.4 seems to have done the trick. Image & audio
from tuner are great, and changing channels for the pal-europe zone
works fine using ptune.pl .
However, when using the s-video + line in input, things are not so
fabulous.
First of all, the image is a bit grainy, almost like every other pixel
is black. Setting the dnr_spatial to 6 or 8 helps a bit, but I'm not
sure this should be necessary.
A bigger problem is that there is no sound at all from the line-in.
Manually selecting sound source or one of the 5 different s-video /
composite sources doesn't help, playing with the mute/volume settings
doesn't help (incidentally, the mute/volume controls don't work with
the tuner either, but it's no big deal there since there's sound to
begin with).
Ofcourse I checked my wiring, but from doing a "xxd /dev/video24" this
can't be the issue, the data seems to be all zeroes, and even without a
proper connection some line noise should be showing. For sources 6 & 7
(tuner), this obviously does give non-zero data.
I'm quite new to ivtv and can't say I'm beginning to see the big picture
yet, so I might be overlooking something obvious.
I also tried 0.3.4d today, no improvement.
from dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.4 (d) loading
ivtv: Linux version: 2.6.8-2-686 preempt 686 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
PCI: Found IRQ 11 for device 0000:00:0d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
ivtv: XXX PCI device: 0x7190 vendor: 0x8086
tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7959016
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded.
cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408
cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model
0x008d2590, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: ivtv_enc_thread: pid = 5319, itv = 0xccbe22e0
ivtv: Setting Tuner 58
tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0
cx25840: decoder set input (6)
cx25840: Tuner Input
cx25840: set audio: 0x01
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
cx25840: set audio: 0x01
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
md5sum /lib/modules/*.{bin,ROM}
305dba74bbe5905447add8883f3ecb68 /lib/modules/ivtv-fw-dec.bin
ab75947ef1b086e26f9b08e628baa02e /lib/modules/ivtv-fw-enc.bin
a6f6a90a3be338cdb89d59e835798408 /lib/modules/HcwMakoA.ROM
(I have tried a few other firmwares, none led to a result better than
this)
Ofcourse, I'll gladly provide any other info required. No other video
capture devices are present in the system btw.
Arjen
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.
Get your fingers limbered up and give it your best shot. 4 great events, 4
opportunities to win big! Highest score wins.NEC IT Guy Games. Play to
win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
