Hello, I'm new to this list, so forgive me if I ask something that has been asked 100 times before...
I have a pvr150 and have installed version 3.3.6P successfully. All modules load fine as far as I can tell. However when I select a frequency as provided by my cable company: ./ptune.pl -F 216000 followed by cat /dev/video0 >/mp3/test.mpg I get a nice mpg file with only some vissible noise, and no audio. I have also played with the radio program, with simular effects, that is, only very soft noise can be heard. I have checke my antenna cable with a vcr, and am confident it is OK.. Below are my logs from when ivtv starts and after the ptune command Anything I can try? ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (p) loading ivtv: Linux version: 2.6.11.11 SMP preempt K7 4KSTACKS gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: VIA PCI device: 0x3116 vendor: 0x1106 tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 7678759 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x00892590, Revision 0x00000001 ivtv: PAL tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware read failed ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 164 x 12740 buffers (2048KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 58 tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0 cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: ivtv_enc_thread: pid = 10519, itv = 0xdeba7860 ivtv: ivtv_enc_vbi_thread: pid = 10520, itv = 0xdeba7860 ivtv: Switching standard to PAL. cx25840: decoder set norm PAL ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== cx25840: decoder disable output cx25840: decoder enable output cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) Kind regards, Henk. ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
