On Thu, Jun 23, 2005 at 11:43:17AM +0200, Jasper van der Neut - Stulen wrote:
> On Thu, Jun 23, 2005 at 11:27:54AM +0200, [EMAIL PROTECTED] wrote:
> > On Thu, Jun 23, 2005 at 11:00:00AM +0200, Jasper van der Neut - Stulen 
> > wrote:
> > > 
> > I'l give 0.3.5B a try. 
> > 
> 
> Note 0.3.5b doesn't work for me, 0.3.5 plain does.
I tried 0.3.5 (install module, powed down computer, restart computer, 
start modules, and run

./record-v4l2.pl --standard PAL -F 216000 --duration 25

I still have video but still no sound.

The output from dmesg contains some new errors.

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.5 () loading
ivtv: Linux version: 2.6.11.11 SMP preempt K7 4KSTACKS gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3116 vendor: 0x1106
tveeprom: Hauppauge: model = 26559, rev = B260, serial# = 7678759
tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 
= 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x00892590, 
Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: detecting client on address 0x88
cx25840: writing init values
cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'.
cx25840: Failed to load any FW image file
cx25840: Status: cx258433 (DEVICE_ID)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 128 16384 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers  0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4 
ivtv: Setting Tuner 58
tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #0
cx25840: decoder set input (6)
cx25840: Tuner Input
ivtv: ivtv_enc_thread: pid = 7234, itv = 0xdeb99560
ivtv: ivtv_enc_vbi_thread: pid = 7235, itv = 0xdeb99560
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #0
ivtv: ====================  END INIT IVTV  ====================
cx25840: decoder disable output
cx25840: decoder enable output
cx25840: decoder set size 720x480 (from 720x576) -> scale  0x65434, filter 0
ivtv: Allocate DMA stream 0 using 128 16384 byte buffers  2097152 kbytes total
ivtv: i2c client addr: 0x21 not found for command 1074029670!
cx25840: decoder disable output
cx25840: decoder enable output
ivtv: ENC: Sleep timeout interrupted.
ivtv: ENC: EOS took 360 ms to occur.

Henk,


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to