On Wednesday 29 June 2005 11:56, John Harvey wrote:
> I'm busy tonight but i'll try to remember to look at
> this and suggest something tomorrow.
Dmesg output from a fresh (hard) boot, modprobe ivtv (I have nothing in my
modules.conf nor modprobe.conf so no options were passed):
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.4 (p) loading
ivtv: Linux version: 2.6.9 preempt K7 REGPARM gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x0651 vendor: 0x1039
tveeprom: Hauppauge: model = 48132, rev = J323, serial# = 6813993
tveeprom: tuner = Philips FM1236 (idx = 23, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00a93493,
Revision 0x00000001
ivtv: NTSC tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler
(G) no-thread mode
msp34xx: $Id$ compiled on: May 23 2005 17:35:04
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create DMA stream 6 using 1024 2048 byte buffers 0 kbytes total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv
i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: ivtv_enc_thread: pid = 2705, itv = 0xe0aa3060
ivtv: ivtv_enc_vbi_thread: pid = 2706, itv = 0xe0aa3060
ivtv: ivtv_dec_thread: pid = 2707, itv = 0xe0aa3060
ivtv: ivtv_dec_vbi_thread: pid = 2708, itv = 0xe0aa3060
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
And after modprobe'ing ivtv-fb:
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has
1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xdd510000, mapped to 0xe1990000, size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
Console: switching to colour frame buffer device 90x30
ivtv-osd: fb0: iTVC15 TV out frame buffer device
ivtv: Allocate DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total
After dd'ing as you instructed:
ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Allocate DMA stream 6 using 1024 2048 byte buffers 1048576 kbytes total
No futher changes in dmesg after loading X or running mplayer, but mplayer's
output is a little (but not significantly) different:
X11 error: BadImplementation (server does not implement operation)
MPlayer interrupted by signal 6 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible
bug.
X11 error: BadImplementation (server does not implement operation)
MPlayer interrupted by signal 6 in module: uninit_vo
alsa-uninit: pcm closed
X Error of failed request: BadImplementation (server does not implement
operation)
Major opcode of failed request: 139 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 83
Current serial number in output stream: 91
X Error of failed request: BadImplementation (server does not implement
operation)
Major opcode of failed request: 139 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 84
Current serial number in output stream: 91
X Error of failed request: BadImplementation (server does not implement
operation)
Major opcode of failed request: 139 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 85
Current serial number in output stream: 91
X Error of failed request: BadImplementation (server does not implement
operation)
Major opcode of failed request: 139 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 86
Current serial number in output stream: 91
X Error of failed request: BadImplementation (server does not implement
operation)
Major opcode of failed request: 139 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 87
Current serial number in output stream: 91
And x.org's output from that:
GetModeLine - scrn: 0 clock: 34564
GetModeLine - hdsp: 720 hbeg: 752 hend: 840 httl: 928
vdsp: 480 vbeg: 484 vend: 488 vttl: 504 flags: 10
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
Ioctl IVTV_IOC_PREP_FRAME_YUV returned failed Error Invalid argument
bitsPerPixel=32, depth=24, defaultVisual=TrueColor
mask: ff0000,ff00,ff, offset: 16,8,0
Oh and xvinfo's output if that helps:
X-Video Extension version 2.2
screen #0
Adaptor #0: "PVR350"
number of ports: 1
port base: 56
operations supported: PutImage
supported visuals:
depth 24, visualID 0x22
depth 24, visualID 0x23
depth 24, visualID 0x24
depth 24, visualID 0x25
no port attributes defined
maximum XvImage size: 768 x 576
Number of image formats: 1
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
Hope this is useful. :-)
-A.
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
