That xvideo size thing looks like a bug but i don't think it's causing this. I'll take a look over the next couple of days.
Andrew I noticed you are running 3.4p driver. This is almost definately not going to work for NTSC. I would suggest moving to a recent (probably latest 3.6u?) and take the latest xdriver from there as well and see how you get on with that. --- klickmich <[EMAIL PROTECTED]> wrote: > Might that be a PAL vs. NTSC issue? Xvinfo shows the > PAL-Resolution as max. > xv size while ivtv-fb et al are correct about their > NTSC assumptions. > > Just thinking. > Martin > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On > Behalf Of > > Andrew Kohlsmith > > Sent: Thursday, June 30, 2005 1:22 AM > > To: ivtv-devel@lists.sourceforge.net > > Subject: Re: [ivtv-devel] Re: Ioctl > IVTV_IOC_PREP_FRAME_YUV > > returned failed Error Invalid argument (was > mplayer with -vo > > xv: signal 6) > > > > On Wednesday 29 June 2005 11:56, John Harvey > wrote: > > > I'm busy tonight but i'll try to remember to > look at this > > and suggest > > > something tomorrow. > > > > Dmesg output from a fresh (hard) boot, modprobe > ivtv (I have > > nothing in my modules.conf nor modprobe.conf so no > options > > were passed): > > > > ivtv: ==================== START INIT IVTV > ==================== > > ivtv: version 0.3.4 (p) loading > > ivtv: Linux version: 2.6.9 preempt K7 REGPARM > gcc-3.3 > > ivtv: In case of problems please include the debug > info > > ivtv: between the START INIT IVTV and END INIT > IVTV lines when > > ivtv: mailing the ivtv-devel mailinglist. > > ivtv: Autodetected WinTV PVR 350 card > > ivtv: Found an iTVC15 based chip > > ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 > (level, low) -> IRQ 17 > > ivtv: Unreasonably low latency timer, setting to > 64 (was 32) > > ivtv: XXX PCI device: 0x0651 vendor: 0x1039 > > tveeprom: Hauppauge: model = 48132, rev = J323, > serial# = 6813993 > > tveeprom: tuner = Philips FM1236 (idx = 23, type = > 2) > > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 > = 0x00001000) > > tveeprom: audio_processor = MSP3440 (type = 11) > > ivtv: i2c attach [client=tveeprom[50],ok] > > ivtv: Tuner Type 2, Tuner formats 0x00001000, > Radio: yes, > > Model 0x00a93493, Revision 0x00000001 > > ivtv: NTSC tuner detected > > ivtv: Radio detected > > tuner: Ignoring new-style parameters in presence > of obsolete ones > > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c > driver #0 > > ivtv: i2c attach [client=(tuner unset),ok] > > saa7115: starting probe for adapter ivtv i2c > driver #0 (0x10005) > > saa7115: detecting saa7115 client on address 0x42 > > saa7115: writing init values > > ivtv: i2c attach [client=saa7115[50],ok] > > saa7115: status: (1E) 0x48, (1F) 0xc0 > > saa7127: Ignoring new-style parameters in presence > of obsolete ones > > saa7127: video encoder driver version V 0.3 loaded > > saa7127: detecting saa7127 client on address 0x88 > > saa7127: Selecting NTSC video Standard > > saa7127: Selecting S-Video+Composite > > saa7127: Turn WSS off > > saa7127: Widescreen Mode 4:3 Full Format > > saa7127: Selecting Normal Encoder Input > > saa7127: Enable Video Output > > ivtv: i2c attach [client=saa7127[50],ok] > > msp34xx: ivtv version > > msp34xx: init: chip=MSP3448W-A2, has NICAM > support, simple > > (D) mode, simpler > > (G) no-thread mode > > msp34xx: $Id$ compiled on: May 23 2005 17:35:04 > > ivtv: i2c attach [client=MSP3448W-A2,ok] > > ivtv: Encoder revision: 0x02040011 > > ivtv: Decoder revision: 0x02020023 > > ivtv: Configuring WinTV PVR 350 card with 10 > streams > > ivtv: Registered v4l2 device, streamtype 0 minor 0 > > ivtv: Create DMA stream 0 using 128 16384 byte > buffers 0 kbytes total > > ivtv: Registered v4l2 device, streamtype 1 minor > 32 > > ivtv: Create DMA stream 1 using 20 103680 byte > buffers 0 kbytes total > > ivtv: Registered v4l2 device, streamtype 2 minor > 224 > > ivtv: Create DMA stream 2 using 40 52224 byte > buffers 0 kbytes total > > ivtv: Registered v4l2 device, streamtype 3 minor > 24 > > ivtv: Create DMA stream 3 using 455 4608 byte > buffers 0 kbytes total > > ivtv: Registered v4l2 device, streamtype 4 minor > 64 > > ivtv: Create stream 4 > > ivtv: Registered v4l2 device, streamtype 5 minor > 16 > > ivtv: Create DMA stream 5 using 16 65536 byte > buffers 0 kbytes total > > ivtv: Registered v4l2 device, streamtype 6 minor > 228 > > ivtv: Create DMA stream 6 using 1024 2048 byte > buffers 0 kbytes total > > ivtv: Registered v4l2 device, streamtype 7 minor > 232 > > ivtv: Create stream 7 > > ivtv: Registered v4l2 device, streamtype 8 minor > 48 > > ivtv: Create DMA stream 8 using 20 103680 byte > buffers 0 kbytes total > > ivtv: Create DMA stream 9 using 32 65536 byte > buffers 0 kbytes total > > ivtv: Setting Tuner 2 > > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 > and > > compatibles)) by ivtv i2c driver #0 > > saa7115: decoder set input (4) > > saa7115: now setting Composite input > > ivtv: ivtv_enc_thread: pid = 2705, itv = > 0xe0aa3060 > > ivtv: ivtv_enc_vbi_thread: pid = 2706, itv = > 0xe0aa3060 > > ivtv: ivtv_dec_thread: pid = 2707, itv = > 0xe0aa3060 > > ivtv: ivtv_dec_vbi_thread: pid = 2708, itv = > 0xe0aa3060 > > ivtv: Setting audio matrix to input 3, output 1 > > ivtv: Switching standard to NTSC. > > saa7115: decoder set norm NTSC > > saa7115: set audio: 0x01 > > saa7127: Setting Encoder Video Standard > > saa7127: Set NTSC Video Mode > > saa7127: Selecting NTSC video Standard > > ivtv: Initialized WinTV PVR 350, card #0 > > ivtv: ==================== END INIT IVTV > ==================== > > > > > > And after modprobe'ing ivtv-fb: > > > > ivtv-osd: Framebuffer module loaded (attached to > ivtv card id 0) > > ivtv-osd: Framebuffer is at decoder-relative > address > > 0x00510000 and has 1704960 bytes. > > ivtv-osd: screen coords: [0 0] -> [720 480] > > ivtv-osd: original global alpha = 208 > > ivtv-osd: current OSD state = 39 > > ivtv-osd: new global alpha = 208 (1 255 0) > > ivtv-osd: framebuffer at 0xdd510000, mapped to > 0xe1990000, size 1350k > > ivtv-osd: mode is 720x480x32, linelength=2880 > > Console: switching to colour frame buffer device > 90x30 > > ivtv-osd: fb0: iTVC15 TV out frame buffer device > > ivtv: Allocate DMA stream 9 using 32 65536 byte > buffers > > 2097152 kbytes total > > > > After dd'ing as you instructed: > > > > ivtv: Allocate DMA stream 0 using 128 16384 byte > buffers > > 2097152 kbytes total > > saa7115: decoder disable output > > saa7115: decoder enable output > > ivtv: Allocate DMA stream 5 using 16 65536 byte > buffers > > 1048576 kbytes total > > ivtv: Allocate DMA stream 6 using 1024 2048 byte > buffers > > 1048576 kbytes total > > > > No futher changes in dmesg after loading X or > running > > mplayer, but mplayer's output is a little (but not > > > significantly) different: > > > > X11 error: BadImplementation (server does not > implement operation) > === message truncated === ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
