Hi! I have a 2.6.12-debian box, with a PVR-150 PAL card in.
The only option I have given to any of the ivtv-modules is: options ivtv tda9887=0 cardtype=6 (Because the card is sometimes incorrectly identified as a PVR-250). When trying to use 0.3.7f, i get time out waiting for firmware, check log below. Any suggestions? BR Richard ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (f) loading ivtv: Linux version: 2.6.12-myth PENTIUM4 gcc-4.0 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: User specified WinTV PVR 150 card (detected iTVC16 based chip) ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 209 tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7886509 tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) tveeprom: tuner fmt = PAL(B/G) PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) tveeprom: audio_processor = MSP3400C (type = 4) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] ivtv: Encoder revision: 0x02050032 ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #0 ivtv warning: i2c client addr: 0x43 not found for command 0x40085618! ivtv warning: i2c client addr: 0x43 not found for command 0x402c5639! ivtv warning: 1000 ms time out waiting for firmware ivtv warning: Failed api call 0x000000d2 with result 0xfffffff0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ ivtv-devel mailing list ivtv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-devel
