Hi,

I am usng a PVR500 with kernel 2.6.10, ivtv-0.3.7h and on each channel 
I have a very clear picture with crisp colours. 
But I have no sound.

I tried numerous options in modprobe.conf with no results.


I'm convinced my setup is wrong, but how to fix it? 
Any help would be appreciated.

Dom.


modprobe.conf
-------------
options tda9887 debug=3


$ modprobe ivtv

syslog
------
Aug 22 22:31:00 localhost kernel: ivtv: ==================== START INIT
IVTV ====================
Aug 22 22:31:00 localhost kernel: ivtv: version 0.3.7 (h) loading
Aug 22 22:31:00 localhost kernel: ivtv: Linux version: 2.6.10 preempt
686 gcc-3.3
Aug 22 22:31:00 localhost kernel: ivtv: In case of problems please
include the debug info
Aug 22 22:31:00 localhost kernel: ivtv: between the START INIT IVTV and
END INIT IVTV lines when
Aug 22 22:31:00 localhost kernel: ivtv: mailing the ivtv-devel
mailinglist.
Aug 22 22:31:00 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
(iTVC16 based)
Aug 22 22:31:00 localhost kernel: ACPI: PCI interrupt 0000:02:08.0[A] ->
GSI 17 (level, low) -> IRQ 17
Aug 22 22:31:00 localhost kernel: tveeprom: Hauppauge: model = 23559,
rev = D291, serial# = 7726958
Aug 22 22:31:00 localhost kernel: tveeprom: tuner = Philips FQ1216AME
MK4 (idx = 91, type = 56)
Aug 22 22:31:00 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I)
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Aug 22 22:31:00 localhost kernel: tveeprom: audio processor = CX25843
(type = 25)
Aug 22 22:31:00 localhost kernel: tveeprom: decoder processor = CX25843
(type = 1e)
Aug 22 22:31:00 localhost kernel: ivtv: i2c attach to card #0 ok
[client=tveeprom[50], addr=50]
Aug 22 22:31:00 localhost kernel: tuner: Ignoring new-style parameters
in presence of obsolete ones
Aug 22 22:31:00 localhost kernel: tuner: chip found at addr 0xc0 i2c-bus
ivtv i2c driver #0
Aug 22 22:31:00 localhost kernel: TEA5767 detected.
Aug 22 22:31:00 localhost kernel: ivtv: i2c attach to card #0 ok
[client=(tuner unset), addr=60]
Aug 22 22:31:00 localhost kernel: tuner: type set to 62 (Philips
TEA5767HN FM Radio) by autodetect
Aug 22 22:31:00 localhost kernel: type set to 62 (Philips TEA5767HN FM
Radio)
Aug 22 22:31:00 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Aug 22 22:31:00 localhost kernel: ivtv: i2c attach to card #0 ok
[client=(tuner unset), addr=61]
Aug 22 22:31:02 localhost kernel: cx25840:
firmware /lib/modules/HcwMakoA.ROM loaded
Aug 22 22:31:02 localhost kernel: ivtv: i2c attach to card #0 ok
[client=cx25840[50], addr=44]
Aug 22 22:31:02 localhost kernel: ivtv: i2c attach to card #0 ok
[client=wm8775[50], addr=1b]
Aug 22 22:31:02 localhost kernel: tda9885/6/7: chip found @ 0x86
Aug 22 22:31:02 localhost kernel: ivtv: i2c attach to card #0 ok
[client=tda9887, addr=43]
Aug 22 22:31:02 localhost kernel: ivtv: Detected a TEA5767 radio tuner.
Enabling radio support.
Aug 22 22:31:03 localhost kernel: ivtv: Encoder revision: 0x02050032
Aug 22 22:31:03 localhost kernel: ivtv warning: Encoder Firmware can be
buggy, use version 0x02040011!!!!
Aug 22 22:31:03 localhost kernel: ivtv: Create DMA encoder MPEG stream:
0 x 32768 buffers (0KB total)
Aug 22 22:31:03 localhost kernel: ivtv: Create DMA encoder YUV stream: 0
x 12960 buffers (0KB total)
Aug 22 22:31:03 localhost kernel: ivtv: Create DMA encoder VBI stream: 0
x 26208 buffers (0KB total)
Aug 22 22:31:03 localhost kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Aug 22 22:31:03 localhost kernel: ivtv: Create encoder radio stream
Aug 22 22:31:03 localhost kernel: tuner: type set to 56 (Philips
PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0
Aug 22 22:31:03 localhost udev[6307]: creating device node '/dev/video0'
Aug 22 22:31:03 localhost udev[6309]: creating device node
'/dev/video32'
Aug 22 22:31:03 localhost udev[6311]: creating device node '/dev/vbi0'
Aug 22 22:31:03 localhost udev[6313]: creating device node
'/dev/video24'
Aug 22 22:31:03 localhost udev[6315]: creating device node '/dev/radio0'
Aug 22 22:31:03 localhost kernel: tda9885/6/7: switching to v4l2
Aug 22 22:31:03 localhost kernel: tda9885/6/7: configure for: PAL-BG
Aug 22 22:31:03 localhost kernel: tda9885/6/7: writing: b=0xd4 c=0x70
e=0x09
Aug 22 22:31:03 localhost kernel: tda9885/6/7: write: byte B 0xd4
Aug 22 22:31:03 localhost kernel:   B0   video mode      : sound trap
Aug 22 22:31:03 localhost kernel:   B1   auto mute fm    : no
Aug 22 22:31:03 localhost kernel:   B2   carrier mode    : QSS
Aug 22 22:31:03 localhost kernel:   B3-4 tv sound/radio  : FM/TV
Aug 22 22:31:03 localhost kernel:   B5   force mute audio: no
Aug 22 22:31:03 localhost kernel:   B6   output port 1   : high
(inactive)
Aug 22 22:31:03 localhost kernel:   B7   output port 2   : high
(inactive)
Aug 22 22:31:03 localhost kernel: tda9885/6/7: write: byte C 0x70
Aug 22 22:31:03 localhost kernel:   C0-4 top adjustment  : 0 dB
Aug 22 22:31:03 localhost kernel:   C5-6 de-emphasis     : 50
Aug 22 22:31:03 localhost kernel:   C7   audio gain      : 0
Aug 22 22:31:03 localhost kernel: tda9885/6/7: write: byte E 0x09
Aug 22 22:31:03 localhost kernel:   E0-1 sound carrier   : 5.5 MHz
Aug 22 22:31:03 localhost kernel:   E6   l pll ganting   : 13
Aug 22 22:31:03 localhost kernel:   E2-4 video if        : 38.9 MHz
Aug 22 22:31:03 localhost kernel:   E5   tuner gain      : normal
Aug 22 22:31:03 localhost kernel:   E7   vif agc output  : pin3+pin22
port
Aug 22 22:31:03 localhost kernel: --
Aug 22 22:31:04 localhost kernel: tda9885/6/7: read: 0x8f
Aug 22 22:31:04 localhost kernel:   after power on : yes
Aug 22 22:31:04 localhost kernel:   afc            : -187.5 kHz [min]
Aug 22 22:31:04 localhost kernel:   fmif level     : low
Aug 22 22:31:04 localhost kernel:   afc window     : out
Aug 22 22:31:04 localhost kernel:   vfi level      : high
Aug 22 22:31:04 localhost kernel: ivtv: Initialized WinTV PVR 150, card
#0
Aug 22 22:31:04 localhost kernel: ivtv: ======================  NEXT
CARD  ======================
Aug 22 22:31:04 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
(iTVC16 based)
Aug 22 22:31:04 localhost kernel: ACPI: PCI interrupt 0000:02:09.0[A] ->
GSI 18 (level, low) -> IRQ 18
Aug 22 22:31:05 localhost kernel: tveeprom: Hauppauge: model = 23559,
rev = D291, serial# = 7726958
Aug 22 22:31:05 localhost kernel: tveeprom: tuner = Philips FQ1216AME
MK4 (idx = 91, type = 56)
Aug 22 22:31:05 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I)
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Aug 22 22:31:05 localhost kernel: tveeprom: audio processor = CX25843
(type = 25)
Aug 22 22:31:05 localhost kernel: tveeprom: decoder processor = CX25843
(type = 1e)
Aug 22 22:31:05 localhost kernel: ivtv: i2c attach to card #1 ok
[client=tveeprom[50], addr=50]
Aug 22 22:31:05 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #1
Aug 22 22:31:05 localhost kernel: ivtv: i2c attach to card #1 ok
[client=(tuner unset), addr=61]
Aug 22 22:31:06 localhost kernel: cx25840:
firmware /lib/modules/HcwMakoA.ROM loaded
Aug 22 22:31:06 localhost kernel: ivtv: i2c attach to card #1 ok
[client=cx25840[50], addr=44]
Aug 22 22:31:06 localhost kernel: ivtv: i2c attach to card #1 ok
[client=wm8775[50], addr=1b]
Aug 22 22:31:06 localhost kernel: tda9885/6/7: chip found @ 0x86
Aug 22 22:31:06 localhost kernel: ivtv: i2c attach to card #1 ok
[client=tda9887, addr=43]
Aug 22 22:31:07 localhost kernel: ivtv: Encoder revision: 0x02050032
Aug 22 22:31:07 localhost kernel: ivtv warning: Encoder Firmware can be
buggy, use version 0x02040011!!!!
Aug 22 22:31:07 localhost kernel: ivtv: Create DMA encoder MPEG stream:
0 x 32768 buffers (0KB total)
Aug 22 22:31:07 localhost kernel: ivtv: Create DMA encoder YUV stream: 0
x 12960 buffers (0KB total)
Aug 22 22:31:07 localhost kernel: ivtv: Create DMA encoder VBI stream: 0
x 26208 buffers (0KB total)
Aug 22 22:31:07 localhost kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Aug 22 22:31:07 localhost kernel: tuner: type set to 56 (Philips
PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1
Aug 22 22:31:07 localhost udev[6398]: creating device node '/dev/video1'
Aug 22 22:31:07 localhost udev[6400]: creating device node
'/dev/video33'
Aug 22 22:31:07 localhost udev[6402]: creating device node '/dev/vbi1'
Aug 22 22:31:07 localhost udev[6404]: creating device node
'/dev/video25'
Aug 22 22:31:07 localhost kernel: tda9885/6/7: switching to v4l2
Aug 22 22:31:07 localhost kernel: tda9885/6/7: configure for: PAL-BG
Aug 22 22:31:07 localhost kernel: tda9885/6/7: writing: b=0xd4 c=0x70
e=0x09
Aug 22 22:31:07 localhost kernel: tda9885/6/7: write: byte B 0xd4
Aug 22 22:31:07 localhost kernel:   B0   video mode      : sound trap
Aug 22 22:31:07 localhost kernel:   B1   auto mute fm    : no
Aug 22 22:31:07 localhost kernel:   B2   carrier mode    : QSS
Aug 22 22:31:07 localhost kernel:   B3-4 tv sound/radio  : FM/TV
Aug 22 22:31:07 localhost kernel:   B5   force mute audio: no
Aug 22 22:31:07 localhost kernel:   B6   output port 1   : high
(inactive)
Aug 22 22:31:07 localhost kernel:   B7   output port 2   : high
(inactive)
Aug 22 22:31:07 localhost kernel: tda9885/6/7: write: byte C 0x70
Aug 22 22:31:07 localhost kernel:   C0-4 top adjustment  : 0 dB
Aug 22 22:31:07 localhost kernel:   C5-6 de-emphasis     : 50
Aug 22 22:31:07 localhost kernel:   C7   audio gain      : 0
Aug 22 22:31:07 localhost kernel: tda9885/6/7: write: byte E 0x09
Aug 22 22:31:07 localhost kernel:   E0-1 sound carrier   : 5.5 MHz
Aug 22 22:31:07 localhost kernel:   E6   l pll ganting   : 13
Aug 22 22:31:07 localhost kernel:   E2-4 video if        : 38.9 MHz
Aug 22 22:31:07 localhost kernel:   E5   tuner gain      : normal
Aug 22 22:31:07 localhost kernel:   E7   vif agc output  : pin3+pin22
port
Aug 22 22:31:07 localhost kernel: --
Aug 22 22:31:08 localhost kernel: tda9885/6/7: read: 0x8f
Aug 22 22:31:08 localhost kernel:   after power on : yes
Aug 22 22:31:08 localhost kernel:   afc            : -187.5 kHz [min]
Aug 22 22:31:08 localhost kernel:   fmif level     : low
Aug 22 22:31:08 localhost kernel:   afc window     : out
Aug 22 22:31:08 localhost kernel:   vfi level      : high
Aug 22 22:31:09 localhost kernel: ivtv: Initialized WinTV PVR 150, card
#1
Aug 22 22:31:09 localhost kernel: ivtv: ====================  END INIT
IVTV  ====================
Aug 22 22:32:30 localhost kernel: tda9885/6/7: configure for: SECAM-L
Aug 22 22:32:30 localhost kernel: tda9885/6/7: writing: b=0xc4 c=0x10
e=0x0b
Aug 22 22:32:30 localhost kernel: tda9885/6/7: write: byte B 0xc4
Aug 22 22:32:30 localhost kernel:   B0   video mode      : sound trap
Aug 22 22:32:30 localhost kernel:   B1   auto mute fm    : no
Aug 22 22:32:30 localhost kernel:   B2   carrier mode    : QSS
Aug 22 22:32:30 localhost kernel:   B3-4 tv sound/radio  : AM/TV
Aug 22 22:32:30 localhost kernel:   B5   force mute audio: no
Aug 22 22:32:30 localhost kernel:   B6   output port 1   : high
(inactive)
Aug 22 22:32:30 localhost kernel:   B7   output port 2   : high
(inactive)
Aug 22 22:32:30 localhost kernel: tda9885/6/7: write: byte C 0x10
Aug 22 22:32:30 localhost kernel:   C0-4 top adjustment  : 0 dB
Aug 22 22:32:30 localhost kernel:   C5-6 de-emphasis     : no
Aug 22 22:32:30 localhost kernel:   C7   audio gain      : 0
Aug 22 22:32:30 localhost kernel: tda9885/6/7: write: byte E 0x0b
Aug 22 22:32:30 localhost kernel:   E0-1 sound carrier   : 6.5 MHz / AM
Aug 22 22:32:30 localhost kernel:   E6   l pll ganting   : 13
Aug 22 22:32:30 localhost kernel:   E2-4 video if        : 38.9 MHz
Aug 22 22:32:30 localhost kernel:   E5   tuner gain      : normal
Aug 22 22:32:30 localhost kernel:   E7   vif agc output  : pin3+pin22
port
Aug 22 22:32:30 localhost kernel: --
Aug 22 22:32:31 localhost kernel: tda9885/6/7: read: 0xc0
Aug 22 22:32:31 localhost kernel:   after power on : no
Aug 22 22:32:31 localhost kernel:   afc            : - 12.5 kHz
Aug 22 22:32:31 localhost kernel:   fmif level     : low
Aug 22 22:32:31 localhost kernel:   afc window     : in
Aug 22 22:32:31 localhost kernel:   vfi level      : high
Aug 22 22:33:24 localhost kernel: ivtv: Allocate DMA encoder MPEG
stream: 128 x 32768 buffers (4096KB total)

-- 
Dominique Corbex <[EMAIL PROTECTED]>




-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
ivtv-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to