My output for /sbin/modinfo is below. It shows that the module is indeed 0.3.7-f.
I wonder why /var/log/messages reports it as 0.2? It seems to me
that that would indicate a problem somewhere along the line.
I also no longer get the "========== START INIT IVTV ==="
and "========== END INIT IVTV ===" lines. What that
something that was just in the RPMs?
-Tim
$ /sbin/modinfo /lib/modules/2.6.12-1.1372_FC3/ivtv/ivtv.ko
filename: /lib/modules/2.6.12-1.1372_FC3/ivtv/ivtv.ko
version: 0.3.7-f
license: GPL
description: iTVC15_16 driver
author: Kevin Thayer
parm: ivtv_first_minor:Set minor assigned to first card
parm: max_dec_osd_buffers:Max Dec OSD Buffers (in megs)
Default: 2
parm: dec_osd_buffers:Dec OSD buffers (in megs)
Default: 1
parm: max_dec_vbi_buffers:Max Dec VBI Buffers (in megs)
Default: 1
parm: dec_vbi_buffers:Dec VBI buffers (in megs)
Default: 1
parm: max_dec_yuv_buffers:Max Dec YUV Buffers (in megs)
Default: 1
parm: dec_yuv_buffers:Dec YUV buffers (in megs)
Default: 1
parm: max_dec_mpg_buffers:Max Dec MPG Buffers (in megs)
Default: 1
parm: dec_mpg_buffers:Dec MPG buffers (in megs)
Default: 1
parm: max_pcm_buffers:Max Enc PCM Buffers (in megs)
Default: 16
parm: pcm_buffers:Enc PCM buffers (in megs)
Default: 2
parm: max_vbi_buffers:Max Enc VBI Buffers (in megs)
Default: 16
parm: vbi_buffers:Enc VBI Buffers (in megs)
Default: 2
parm: max_yuv_buffers:Max Enc YUV Buffers (in megs)
Default: 32
parm: yuv_buffers:Enc YUV Buffers (in megs)
Default: 2
parm: max_mpg_buffers:Max Enc MPG Buffers (in megs)
Default: 16
parm: mpg_buffers:Enc MPG Buffers (in megs)
Default: 4
parm: ivtv_dfw:Decoder firmware image
Default: /lib/modules/ivtv-fw-dec.bin
parm: ivtv_efw:Encoder firmware image
Default: /lib/modules/ivtv-fw-enc.bin
parm: ivtv_dynbuf:Specify using Dynamic Buffers: 0 = No, 1 = Yes,
Default: Yes
parm: ivtv_std:Specify video standard: 1 = NTSC, 2 = PAL, 3 = SECAM,
Default: Autodetect
parm: ivtv_debug:Debug level (bitmask). Default: errors only
(ivtv_debug = 255 gives full debugging)
parm:
cardtype:Only use this option if your card is not detected properly.
Specify card type:
1 = WinTV PVR 250
2 = WinTV PVR 350
3 = AVerMedia M179
4 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP
5 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP
6 = WinTV PVR-150 or PVR-500
7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)
Default: Autodetect
parm: autoload:automatically load i2c modules like tuner.o,
default is 1 (yes)
parm: radio:Enable or disable the radio. Use only if autodetection
fails. 0 = disable, 1 = enable
parm: tda9887:Enable or disable tda9887 module,
0 = normal, 1+ = pinnacle_id
parm: tuner:Tuner type selection,
see tuner.h for values
parm: yuv_fixup:Toggles conversion of Hauppauge
Macroblock NV12 to NV12
parmtype: max_dec_osd_buffers:int
parmtype: max_dec_vbi_buffers:int
parmtype: max_dec_yuv_buffers:int
parmtype: max_dec_mpg_buffers:int
parmtype: max_pcm_buffers:int
parmtype: max_vbi_buffers:int
parmtype: max_yuv_buffers:int
parmtype: max_mpg_buffers:int
parmtype: dec_osd_buffers:int
parmtype: dec_vbi_buffers:int
parmtype: dec_yuv_buffers:int
parmtype: dec_mpg_buffers:int
parmtype: pcm_buffers:int
parmtype: vbi_buffers:int
parmtype: yuv_buffers:int
parmtype: mpg_buffers:int
parmtype: ivtv_first_minor:int
parmtype: ivtv_dfw:charp
parmtype: ivtv_efw:charp
parmtype: ivtv_yuvscale:int
parmtype: ivtv_dynbuf:int
parmtype: ivtv_std:int
parmtype: ivtv_debug:int
parmtype: autoload:int
parmtype: tda9887:array of int
parmtype: cardtype:array of int
parmtype: radio:array of bool
parmtype: tuner:array of int
parmtype: yuv_fixup:int
srcversion: CCB5F5A1FEA44D9CA8D0D3C
depends: videodev,i2c-algo-bit
vermagic: 2.6.12-1.1372_FC3 gcc-3.4
- [ivtv-devel] Version info in /var/log/messages Timothy McFadden
- Re: [ivtv-devel] Version info in /var/log/messages mt
- Re: [ivtv-devel] Version info in /var/log/messag... Daniel Segel
- Re: [ivtv-devel] Version info in /var/log/me... mt
- Re: [ivtv-devel] Version info in /var/lo... Timothy McFadden
- Re: [ivtv-devel] Version info in /var/lo... Daniel Segel
- Re: [ivtv-devel] Version info in /var/log/me... Timothy McFadden
- Re: [ivtv-devel] Version info in /var/lo... Brendan Hoar
- Re: [ivtv-devel] Version info in /v... Timothy McFadden
- Re: [ivtv-devel] Version info i... Brendan Hoar
- Re: [ivtv-devel] Version info i... Adam Forsyth
- Re: [ivtv-devel] Version in... Timothy McFadden
- Re: [ivtv-devel] Version in... Adam Forsyth
- Re: [ivtv-devel] Version in... Timothy McFadden