Hi Joel Take a look at:
http://ivtvdriver.org/index.php/Firmware ivtv-fw-enc.bin and ivtv-fw-dec.bin are extracted from the firmware file that comes with the video capture card, or can be extracted from the sam files downloaded from the capure card manufacturers website Best Regards Trev On Thursday 08 Dec 2005 13:05, Joel Webb wrote: > On Wednesday 07 December 2005 11:46 pm, Joel Webb wrote: > > I am running SuSE 10.0 with the default drivers that came with suse for > ivtv. > > >From the documentation on the Internet, it looks like that it is supposed > > to > > be loading an image called ivtv-fw-enc.bin and ivtv-fw-dec.bin. However, > the default SuSE rpms don't have these. I did find however that in the rpm > it has a ivtv-api file, but that doesn't look like the driver. > > Below is the error that I am receiving at startup. > > > ivtv: module not supported by Novell, setting U taint flag. > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.7 (c) loading > ivtv: Linux version: 2.6.13-15.7-default 586 REGPARM gcc-4.0 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) > -> IRQ 10 > i2c-algo-bit.o: (0) scl=1, sda=1 > i2c-algo-bit.o: (1) scl=1, sda=0 > i2c-algo-bit.o: (2) scl=1, sda=1 > i2c-algo-bit.o: (3) scl=0, sda=1 > i2c-algo-bit.o: (4) scl=1, sda=1 > i2c-algo-bit.o: ivtv i2c driver #0 passed test. > ivtv: i2c attach [client=tveeprom,ok] > > : chip found @ 0xc2 (ivtv i2c driver #0) > > ivtv: i2c attach [client=(tuner unset),ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[50],ok] > saa7115: status: (1E) 0x48, (1F) 0xc0 > saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005) > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[50],ok] > msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio > mode=simpler ivtv: i2c attach [client=MSP3448W-A2,ok] > ivtv: i2c attach [client=unset,ok] > ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c > driver #0] > msp34xxg: daemon started > tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 8207478 > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3440 (type = 11) > ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model > 0x00ad2598, Revision 0xc56d9e80 > ivtv: NTSC tuner detected > ivtv: Radio detected > ivtv: requesting ivtv-fw-enc.bin from hotplug > ivtv: firmware load failed > ivtv: failed loading encoder firmware > ivtv: Error loading firmware -3! > ivtv: Error -3 initializing firmware. > ivtv: Error -12 on initialization > ivtv-iTVC15_16_mpg2_encoder_card: probe of 0000:00:0b.0 failed with error > -12 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
