On Thursday 29 December 2005 23:47, Des Dougan wrote:
> On Thu, 2005-12-29 at 13:31 +0100, dewag wrote:
> > did you already try the command:
> >
> > mplayer /dev/video0
> >
> > It should show the current channel of the television tuner.
> > Do not forget to use:
> >
> > ivtv-tune -cXX
> >
> > where XX is the wanted channel number.
> >
> > Peter
>
> Peter,
>
> Thanks for your reply. I tried mplayer as suggested, with similar
> results. In checking further, I found that the msp3400, saa7115 and
> saa7127 modules are not being loaded.
These modules are for the PVR250/350 and are not used by the PVR150.
Looking at the log you posted earlier it looks like you might not be
using the correct tda9887 module. Look in /lib/modules if there are
other copies lying around and rename them so they aren't loaded. Only
the ivtv version should be used. You should see a message like:
tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
(note the 'ivtv' string).
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
