Only hack that hepled was "modprobe ivtv tuner=56,56". Does anybody have the same problem with current tveeprom ?
-- Cougar On Mon, 2 Jan 2006, Cougar wrote: > This is something new. I upgraded my ivtv SVN / v4l CVS version yesterday > from a month or so old version and now I get the same error: > > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > tveeprom: Encountered bad packet header [20]. Corrupt or not a Hauppauge > eeprom. > .... > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) > tveeprom: Encountered bad packet header [4c]. Corrupt or not a Hauppauge > eeprom. > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > .... > > Everything else looks ok. Now, I see only channel freq 223250 (from > myth) with very bad picture like weak signal. At the same time other > channels like 59250 or 527250 are not visible at all.. > > When I tried to detect channels I found only this weak one and nothing > else. > > -- > Cougar > > On Sun, 1 Jan 2006, [EMAIL PROTECTED] wrote: > > > Date: Sun, 1 Jan 2006 21:59:38 -0800 (PST) > > From: <[EMAIL PROTECTED]> > > To: User discussion about IVTV <[email protected]> > > Subject: Re: [ivtv-users] 0.4.1 - Corrupt or not a Hauppauge eeprom > > > > Did you recently upgrade your kernel? > > If so did you delete the kernel modules for saa7115 > > tveeprom msp3400 tuner that the kernel installed? > > > > John > > > > > Hi! > > > > > > Everything was working great before a couple days > > > ago and now my > > > PVR-350 is giving me a blank screen on all > > > channels... > > > > > > It all started with a problem with my cable modem > > > (both the pvr and > > > the modem are plugged to the same cable using a 'Y' > > > splitter). Now the > > > modem is ok but not the pvr... I've tried upgrading > > > to 0.4.1 but that > > > didn't changed anything. > > > > > > ivtvctl -I reports this : > > > > > > > > --------------------------------------------------------------------------- > > > check SAA7115 input signal > > > ioctl: Input detect failed (cannot read SAA regs) > > > ioctl: Input detect failed (cannot read SAA regs) > > > ioctl: VIDEO_STATUS = Bad > > > > > > SAA7115 reg[STATUS#1 - 0x1E] = 177ff8e > > > Color Standard (D0-D1): PAL > > > White peak loop (D2): Activated > > > Gain value for act.lum. (min) (D3): Limited > > > Gain value for act.lum. (max) (D4): Not limited > > > WIPA-mode slow-time constant (D5): Not activated > > > Horizontal frequency (D6): Locked > > > Field length (D7): Standard > > > > > > SAA7115 reg[STATUS#2 - 0x1F] = 177ff8e > > > Ready for capture (D0): No > > > Macrovision 7.01 (D1): Yes > > > MV Colorstripe burst (D2): Yes > > > MV Colorstripe burst type 3 (D3): Yes > > > Input signal timebase (D4): Non-stable (VCR) > > > Field frequency (D5): 50Hz > > > H & V loops (D6): Locked > > > Interlace (D7): Detected > > > > > --------------------------------------------------------------------------- > > > > > > VIDEO_STATUS = Bad ??? > > > > > > Could it be that the signal on the cable is weak? I > > > doubt this is the > > > case because the pvr is still working under XP... > > > > > > Also I get a weird message for tveeprom a boot time > > > : > > > > > > tveeprom: Encountered bad packet header [50]. > > > Corrupt or not a Hauppauge eeprom. > > > > > > Is this just a warning that I can ignore? > > > > > > Anyway here's the full output: > > > > > > ivtv: ==================== START INIT IVTV > > > ==================== > > > ivtv: version 0.4.1 (tagged release) loading > > > ivtv: Linux version: 2.6.13-15.7-default 586 > > > REGPARM gcc-4.0 > > > ivtv: In case of problems please include the debug > > > info between > > > ivtv: the START INIT IVTV and END INIT IVTV lines, > > > along with > > > ivtv: any module options, when mailing the > > > ivtv-users mailinglist. > > > ivtv0: Autodetected WinTV PVR 350 card (cx23415 > > > based) > > > ivtv0: Unreasonably low latency timer, setting to 64 > > > (was 32) > > > ivtv0: i2c attach to card #0 ok [client=tveeprom, > > > addr=50] > > > ivtv0: No tuner detected, default to NTSC > > > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv > > > i2c driver #0 > > > ivtv0: i2c attach to card #0 ok [client=(tuner > > > unset), addr=61] > > > saa7115: starting probe for adapter ivtv i2c driver > > > #0 (0x10005) > > > ivtv0: i2c attach to card #0 ok [client=saa7115[50], > > > addr=21] > > > saa7127: starting probe on adapter ivtv i2c driver > > > #0 (0x10005) > > > ivtv0: i2c attach to card #0 ok [client=saa7127[50], > > > addr=44] > > > msp3400 1-0040: ivtv driver > > > ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, > > > addr=40] > > > tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c > > > driver #0) > > > ivtv0: i2c attach to card #0 ok [client=tda9887, > > > addr=43] > > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 > > > bytes) > > > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 > > > bytes) > > > ivtv0: Encoder revision: 0x02040011 > > > ivtv0: Decoder revision: 0x02020023 > > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 > > > buffers (4096KB total) > > > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 > > > buffers (2048KB total) > > > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > > > buffers (2048KB total) > > > ivtv0: Allocate DMA encoder PCM audio stream: 455 x > > > 4608 buffers (2048KB total) > > > ivtv0: Create encoder radio stream > > > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 > > > buffers (1024KB total) > > > ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 > > > buffers (1024KB total) > > > ivtv0: Create decoder VOUT stream > > > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 > > > buffers (1024KB total) > > > ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware > > > (155648 bytes) > > > tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 > > > ivtv0: Initialized WinTV PVR 350, card #0 > > > ivtv: ==================== END INIT IVTV > > > ==================== > > > > > > I've been looking at this problem for 2 days now and > > > I just can't > > > figure out the solution. If anyone has a hint I > > > would really > > > appreciate it! > > > > > > Thanks > > > > > > Christian > > > > > > _______________________________________________ > > > ivtv-users mailing list > > > [email protected] > > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > > > > > > _______________________________________________ > > ivtv-users mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
