I have used the old ivtv 0.2 branch in the past on a VIA M10000 with a PVR350 using gentoo, due to hardware failure it has been out of action for 8 months. I finally ditched the M10000 in favor of a VIA SP13000. Now can't get seem to get ivtv to work again. I have tried both the gentoo 0.4.0 ebuild in the portage tree and when that did not work tried the 0.4.1 release from ivtvdriver.org.
I am using Gentoo 2.6.14-r5 sources. lspci gives 00:14.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) The strange part is when I try to insert the ivtv module this output comes up in dmesg, ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.1 (tagged release) loading ivtv: Linux version: 2.6.14-gentoo-r5 preempt VIAC3-2 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv: ==================== END INIT IVTV ==================== but nothing else. There used to be a whole lot more in the past, and all other posts I have seen have much more going on. After it has been loaded, there are no errors and everything seems fine, but there are no v4l devices setup and nothing works. When I try to load the ivtv-fb module it gives a message ivtv-osd: ivtv_fb_card_id parameter is out of range (valid range: 0--1) at that point the card sometimes hangs, I can't unload the ivtv-fb driver and *sometimes* after this lspci will no longer report the PVR350 as being there. Anyone seen this or have any throughts as to what I can try next? This was all working in the past... _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
