David Novick wrote: > --- Tony Chiaffredo <[EMAIL PROTECTED]> wrote: > > >> I'm just not familiar with the debugging steps getting ivtv installed >> and configured correctly, and I need some help debugging further. >> >> I'm trying to get the ivtv-0.4.4 driver installed on my 2.6.15-gentoo-r7 >> distribution. My card is still not being recognized in the dmesg output >> (below). Also, ivtvctl -a output below that. >> >> I've been trying to build and install the driver using the Generic >> Install Directions (http://www.ivtvdriver.org/index.php/Howto) and >> firmware (http://www.ivtvdriver.org/index.php/Firmware)because >> ivtv-0.4.2 is the most recent version in Gentoo portage (masked at that). >> >> TIA, >> >> TonyC >> >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.4.4 (tagged release) loading >> ivtv: Linux version: 2.6.15-gentoo-r7 SMP gcc-3.4 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) >> GSI 23 sharing vector 0xE1 and IRQ 23 >> ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 17 (level, low) -> IRQ 225 >> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >> tveeprom: Second (radio) tuner idx 101 >> tveeprom: ivtv version >> tveeprom: Hauppauge: model = 23552, rev = E492, serial# = 9308876 >> > > The E492 is a newer Samsung model. > > This person: > http://www.gossamer-threads.com/lists/ivtv/users/29089 > > Had luck using kernel 2.6.16.x and ivtv 0.6.1 > http://www.gossamer-threads.com/lists/ivtv/users/29091 > > > David Novick > [EMAIL PROTECTED] > > I saw that post, so I figured what the heck. Upgraded to 2.6.16, and installed ivtv 0.6.1.
No luck. Anyone? Ideas? Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.1 (tagged release) loading ivtv: Linux version: 2.6.16-gentoo SMP gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 17 (level, low) -> IRQ 217 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 0-0050: Hauppauge model 23552, rev E492, serial# 9308876 tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote ivtv0: This is the first unit of a PVR500 tuner 0-0060: TEA5767 detected. tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner 0-0061: type set to 57 (Philips FQ1236A MK4) ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 18 (level, low) -> IRQ 169 ivtv1: Unreasonably low latency timer, setting to 64 (was 32) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) eth0: no IPv6 routers present cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) tveeprom 1-0050: Hauppauge model 23552, rev E492, serial# 9308876 tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 57 (Philips FQ1236A MK4) ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ==================== cx25840 0-0044: 0x0000 is not a valid video input! _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
