Still Nobody? Has anyone gotten this to work?
I do have an update. I installed the cvs of v4l-dvb
and installed it. Then I installed the ivtv driver
0.6.1 from rpm because it would not build from source.
I then got tv out working, however I would not get
any sound.
I then went to atrpms testing and grabbed the v4l rpm
and ivtv 0.7 rpm and installed it. That fixed the
sound, however lost my capability to display tv out
again. I tried reinstalling the v4l that I downloaded
from v4l again and it made no difference.
Is there problems with ivtv on FC5? I'm sure I'm not
the first with this issue. Can someone please help
me?
Thanks,
Chad
After reading many post about the same/ similar
problem I still have not found the answer. It seems
that alot of people are having this problem, however
nobody is able to answer what is causing it. Should I
open a ticket in trac? I will be more than happy to
help whoever in solving this problem. If you have a
working pvr 350 on FC5 please explain what you did to
get it working. Also, someone posted a diff in
another post saying his 350 wouldn't work without it.
I had problems making it work and do not know exactly
what his patch fixes... He was very vague.
I am having a big problem getting FC5 and my pvr350 to
output to my tv display. I also could not get the rpm
from atrpms to work (It would give me a fatal error
when I modprobed ivtv) So I built the driver from the
source (svn). I am still having problems though.
I do not have any entries in my modprobe.conf. I have
added the correct ones according to Jarod's guide and
then tried it without. The card loads up without a
problem and I then modprobe ivtv-fb, but cannot
display a picture. I did manage recently to get two
orange vertical lines on my tv towards the left side.
However I have not been able to reproduce that either.
here is a copy of the appropiate sections.
dmesg:
ivtv: ==================== START INIT IVTV
====================
ivtv: version 0.6.2 (development revision 3251)
loading
ivtv: Linux version: 2.6.16-1.2096_FC5smp SMP 686
REGPARM 4KSTACKS gcc-4.1
ivtv: In case of problems please include the debug
info between
ivtv: the START INIT IVTV and END INIT IVTV lines,
along with
ivtv: any module options, when mailing the ivtv-users
mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card
(cx23415 based)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level,
low) -> IRQ 20
ivtv0: Unreasonably low latency timer, setting to 64
(was 32)
tveeprom 1-0050: The eeprom says no radio is present,
but the tuner type
tveeprom 1-0050: indicates otherwise. I will assume
that radio is present.
tveeprom 1-0050: Hauppauge model 48132, rev K268,
serial# 8207888
tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx
68, type 47)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP4448 (idx 27)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR remote
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver
#0)
saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver
#0)
usb 1-1: new low speed USB device using uhci_hcd and
address 4
msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c
driver #0)
msp3400 1-0040: MSP4448G-A2 supports radio, mode is
autodetect and autoselect
usb 1-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.10 Keyboard [Logitech USB Receiver]
on usb-0000:00:1d.0-1
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.0-1
usb 1-2: new full speed USB device using uhci_hcd and
address 5
ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00023c0020021a4a]
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144
bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536
buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048
buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200
buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648
bytes)
usb 1-2.1: new low speed USB device using uhci_hcd and
address 6
tuner 1-0061: type set to 47 (LG NTSC (TAPE series))
usb 1-2.1: configuration #1 chosen from 1 choice
input: Logitech Logitech Gaming Keyboard as
/class/input/input2
input: USB HID v1.10 Keyboard [Logitech Logitech
Gaming Keyboard] on usb-0000:00:1d.0-2.1
input: Logitech Logitech Gaming Keyboard as
/class/input/input3
input,hiddev96: USB HID v1.10 Device [Logitech
Logitech Gaming Keyboard] on usb-0000:00:1d.0-2.1
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ====================== NEXT CARD
======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card
(cx23416 based)
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level,
low) -> IRQ 18
ivtv1: Unreasonably low latency timer, setting to 64
(was 32)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
usb 1-2.4: new full speed USB device using uhci_hcd
and address 7
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver
#1)
usb 1-2.4: configuration #1 chosen from 1 choice
input: G15 Keyboard G15 Keyboard as
/class/input/input4
input,hiddev97: USB HID v1.11 Keypad [G15 Keyboard G15
Keyboard] on usb-0000:00:1d.0-2.4
msp3400 2-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c
driver #1)
msp3400 2-0040: MSP3445G-B8 supports radio, mode is
autodetect and autoselect
tveeprom 2-0050: Hauppauge model 32062, rev B185,
serial# 7367115
tveeprom 2-0050: tuner model is TCL 2002N 6A (idx 85,
type 50)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is MSP3445 (idx 12)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has no radio, has IR remote
ivtv1: Corrected autodetection from Hauppauge WinTV
PVR-150 to Hauppauge WinTV PVR-250
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144
bytes)
ivtv1: Encoder revision: 0x02040024
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768
buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800
buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472
buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x
4608 buffers (2048KB total)
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv1: Initialized Hauppauge WinTV PVR-250, card #1
ivtv: ==================== END INIT IVTV
====================
after I modprobe ivtv-fb
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: Framebuffer
module loaded (attached to ivtv card id 0)
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: screen
coords: [0 0] -> [720 480]
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: original
global alpha = 208
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: current OSD
state = 39
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: new global
alpha = 208 (1 255 0)
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: framebuffer
at 0xf1510000, mapped to 0xe2310000, size 1665k
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: mode is
720x480x32, linelength=2880
Apr 25 21:05:41 mythpvr kernel: ivtv0-osd: fb1:
cx23415 TV out frame buffer device
Apr 25 21:05:41 mythpvr kernel: ivtv0: Allocate DMA
decoder OSD stream: 16 x 65536 buffers (1024KB total)
modprobe.conf:
alias eth0 8139too
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
options snd-emu10k1 index=0
remove snd-emu10k1 { /usr/sbin/alsactl store 0
>/dev/null 2>&1 || : ; }; /sbin/modprobe -r
--ignore-remove snd-emu10k1
alias snd-card-1 snd-mpu401
options snd-card-1 index=1
options snd-mpu401 index=1
remove snd-mpu401 { /usr/sbin/alsactl store 1
>/dev/null 2>&1 || : ; }; /sbin/modprobe -r
--ignore-remove snd-mpu401
# nvidia kernel module
alias char-major-195 nvidia-1_0-8756
alias nvidia nvidia-1_0-8756
# ivtv modules setup
#alias char-major-81 videodev
#alias char-major-81-0 ivtv
#alias char-major-81-1 ivtv
#install ivtv /sbin/modprobe --ignore-install ivtv;
/sbin/modprobe ivtv-fb
ll /dev/video*
lrwxrwxrwx 1 root root 6 Apr 25 21:03
/dev/video -> video0
crw------- 1 mythtv root 81, 0 Apr 25 21:03
/dev/video0
crw------- 1 mythtv root 81, 1 Apr 25 21:02
/dev/video1
crw------- 1 mythtv root 81, 16 Apr 25 21:03
/dev/video16
crw------- 1 mythtv root 81, 24 Apr 25 21:03
/dev/video24
crw------- 1 mythtv root 81, 25 Apr 25 21:02
/dev/video25
crw------- 1 mythtv root 81, 32 Apr 25 21:03
/dev/video32
crw------- 1 mythtv root 81, 33 Apr 25 21:02
/dev/video33
crw------- 1 mythtv root 81, 48 Apr 25 21:03
/dev/video48
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
