This card is silk-screened with Falcon II on it. I can record and playback black screen with various white or green dots and some times in and out bands.
I was able to get a picture in black and white picture to record once I manually told it to use tuner type 2 and tried different inputs via ivtv-tune. Unfortunately nearly all the frequencies bring in the same channel with that method. ivtv: no version for "struct_module" found: kernel tainted. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.6.1 (development snapshot compiled on Sun Apr 23 18:23:58 2006) loading ivtv: Linux version: 2.6.16-1.2096_FC5 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 1043/4b2e ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom 1-0050: Huh, no eeprom present (err=-121)? tveeprom 1-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. ivtv0: No tuner detected, default to NTSC tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02040024 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0060: type set to 0 (Temic PAL (4002 FH5)) ivtv0: i2c hardware 0x00000020 not found for command 0x40345622! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
