What sort of card do you have? I don't recognize the vendor ID, so it
seems to be a new unsupported card.
Please give the brand name of the card and the chips that are on the
board, including the tuner used (often you need to gently peel off the
a label that's on the tuner to see the tuner type name beneath it).
Regards,
Hans
On Tuesday 25 April 2006 16:40, Ryan Smith wrote:
> This card is silk-screened with Falcon II on it. I can record and
> playback black screen with various white or green dots and some times
> in and out bands.
>
> I was able to get a picture in black and white picture to record once
> I manually told it to use tuner type 2 and tried different inputs via
> ivtv-tune. Unfortunately nearly all the frequencies bring in the
> same channel with that method.
>
>
>
>
>
> ivtv: no version for "struct_module" found: kernel tainted.
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.6.1 (development snapshot compiled on Sun Apr 23
> 18:23:58 2006) loading
> ivtv: Linux version: 2.6.16-1.2096_FC5 686 REGPARM 4KSTACKS gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Unknown card: vendor/device: 4444/0016
> ivtv0: subsystem vendor/device: 1043/4b2e
> ivtv0: cx23416 based
> ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
> ivtv0: Please mail the vendor/device and subsystem vendor/device IDs
> and what kind of
> ivtv0: card you have to the ivtv-devel mailinglist
> (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN
> CARD].
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5 (level,
> low) -> IRQ 5
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tveeprom 1-0050: Huh, no eeprom present (err=-121)?
> tveeprom 1-0050: Encountered bad packet header [00]. Corrupt or not a
> Hauppauge eeprom.
> ivtv0: No tuner detected, default to NTSC tuner 1-0060: All bytes are
> equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (ivtv i2c
> driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840
> 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02040024
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> tuner 1-0060: type set to 0 (Temic PAL (4002 FH5))
> ivtv0: i2c hardware 0x00000020 not found for command 0x40345622!
> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
