On Monday 08 May 2006 03:29, Andre Conter Ribeiro wrote:
> I have the NTSC version of the Hauppauge receiver, but I was told by
> Hauppauge support that the " pal " version of the card was not for
> pal-m, but for other PAL formats that are used in Africa and Europe.
That's correct.
> I have configured the card, I am running IVTV 0.6.2 but all I can get
> is Bad-quality black and white. I have changed the card to use PAL
> format by using
>
> Modprobe ivtv Ivtv_std=2 (in older versions of IVTV)
>
> ivctl -u 0x0000fff (more zeroes)
>
> and modprobe ivtv pal=m (for the 0.6.x branch).
This is the correct module option for 0.6.2.
> But after I do this, I get a "vertical sync" kind of problem (the
> image gets garbled).
>
> What are the correct procedures to get the Hauppauge set to PAL-M?
The problem is that it has never been tested with PAL-M, so you are the
first.
Can you give me the output of ivtvctl --log-status (after first
selecting a valid channel)? That should give me an indication of what
the status is of various chips and we'll take it from there.
Also please give the IVTV INIT output from dmesg so I know what system
and card you have.
Thanks,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
