--- Adam Chuhaloff <[EMAIL PROTECTED]> wrote:
> I have installed a Hauppauge 500 card. The 1st tuner is working great. The > 2nd tuner displays a good picture, but the sound is just static. To verify > the problem is not with my MythTV config, I tested by issuing the command > "cat /dev/video1 > /tmp/test.mpg". I haven't found any errors in my logs. > Any ideas? > No ideas but I have the same issue with my pvr500 mce a new samsung tuner. The first tuner works fine but the second tuner has a picture but it is very wavy and has a lot of static. I know this is not a cable problem (as I have read on other threads on this subject) as I have a cable amplifier in my basement and my signals is actually a little higher than normal (as stated by the cable modem). The cable modem, PVR 500 and a PVR250 all share the same splitter in the same room. I am using gentoo 2006.0 with ivtv 0.6.1 and a 2.6.16 kernel. I tried 0.6.2 but that caused serious problems with mythtv. John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
