I'm also missing messages from the msp3400 module (responsible for the
audio) in your dmesg output. Is that module installed correctly? No
duplicate modules or something?
Hans
On Thursday 01 June 2006 08:05, Hans Verkuil wrote:
> What was your previous working ivtv version?
>
> Hans
>
> On Thursday 01 June 2006 05:02, Joel Turner wrote:
> > I upgraded to 0.4.5 the other day and no longer get sound on any
> > recordings. Dmesg output is as follows:
> >
> > ivtv: ==================== START INIT IVTV ====================
> > [4294687.696000] ivtv: version 0.4.5 (tagged release) loading
> > [4294687.696000] ivtv: Linux version: 2.6.12-10-686 686 gcc-3.4
> > [4294687.696000] ivtv: In case of problems please include the
> > debug info between
> > [4294687.696000] ivtv: the START INIT IVTV and END INIT IVTV
> > lines, along with
> > [4294687.696000] ivtv: any module options, when mailing the ivtv-
> > users mailinglist.
> > [4294687.706000] ivtv0: Autodetected WinTV PVR 250 card (cx23416
> > based) [4294687.716000] ivtv0: Unreasonably low latency timer,
> > setting to 64 (was 32)
> > [4294687.717000] ivtv0: i2c attach to card #0 ok [client=tveeprom,
> > addr=50]
> > [4294687.843000] ivtv0: i2c attach to card #0 ok [client=(tuner
> > unset), addr=61]
> > [4294687.844000] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver
> > #0) [4294688.040000] saa7115 4-0021: ivtv driver
> > [4294688.040000] saa7115 4-0021: saa7115 found @ 0x42 (ivtv i2c
> > driver #0)
> > [4294688.143000] ivtv0: i2c attach to card #0 ok [client=saa7115,
> > addr=21]
> > [4294688.197000] ivtv0: i2c attach to card #0 ok
> > [client=MSP3445G-B8, addr=40]
> > [4294689.007000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144
> > bytes)
> > [4294689.227000] ivtv0: Encoder revision: 0x02050032
> > [4294689.227000] ivtv0: Allocate DMA encoder MPEG stream: 128 x
> > 32768 buffers (4096KB total)
> > [4294689.228000] ivtv0: Allocate DMA encoder YUV stream: 194 x
> > 10800 buffers (2048KB total)
> > [4294689.229000] ivtv0: Allocate DMA encoder VBI stream: 120 x
> > 17472 buffers (2048KB total)
> > [4294689.229000] ivtv0: Allocate DMA encoder PCM audio stream: 455
> > x 4608 buffers (2048KB total)
> > [4294689.230000] ivtv0: Create encoder radio stream
> > [4294689.427000] ivtv0: Initialized WinTV PVR 250, card #0
> > [4294689.427000] ivtv: ==================== END INIT IVTV
> > ====================
> > [4294689.857000] ivtv0: i2c attach to card #0 ok [client=Hauppauge
> > IR, addr=18]
> >
> > I've tried to recompile the driver, ran depmod and rebooted with
> > the same issues. I'm kind of stumped at this point. Any idea on
> > where to look next?
> >
> > Thanks.
> >
> > --Joel
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
