#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Encoders and Decoders
#
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_USB_DABUSB is not set
On 6/25/06, Michael Hughes <[EMAIL PROTECTED]> wrote:
My previous message didn't happen to find this thread sadly, since I subscribed explicitly for the reason of helping with 0.7...anyway, more information on my troubles follows.
Previous message text follows:
Running slackware 10.2, Kernel 2.6.17.1, ivtv fails to make.
bash-3.1$ make
make -C driver all
make[1]: Entering directory `/home/d3ity/0.7/driver'
created ivtv-svnversion.h
make -C /lib/modules/2.6.17.1/build M=/home/d3ity/0.7/driver modules
make[2]: Entering directory `/home/d3ity/linux- 2.6.17.1'
CC [M] /home/d3ity/0.7/driver/ivtv-driver.o
CC [M] /home/d3ity/0.7/driver/ivtv-
firmware.o
CC [M] /home/d3ity/0.7/driver/ivtv-reset.o
CC [M] /home/d3ity/0.7/driver/ivtv-gpio.o
CC [M] /home/d3ity/0.7/driver/ivtv- irq.o
CC [M] /home/d3ity/0.7/driver/ivtv-mailbox.o
CC [M] /home/d3ity/0.7/driver/ivtv-
vbi.o
CC [M] /home/d3ity/0.7/driver/ivtv-kthreads.o
CC [M] /home/d3ity/0.7/driver/ivtv-audio.o
CC [M] /home/d3ity/0.7/driver/ivtv- ioctl.o
CC [M] /home/d3ity/0.7/driver/ivtv-controls.o
CC [M] /home/d3ity/0.7/driver/ivtv-
video.o
CC [M] /home/d3ity/0.7/driver/ivtv-cards.o
CC [M] /home/d3ity/0.7/driver/ivtv-yuv.o
LD [M] /home/d3ity/0.7/driver/ivtv.o
LD [M] /home/d3ity/0.7/driver/ivtv-fb.o
Building modules, stage 2.
MODPOST
WARNING: "tveeprom_hauppauge_analog" [/home/d3ity/0.7/driver/ivtv.ko]
undefined!
WARNING: "tveeprom_read" [/home/d3ity/0.7/driver/ivtv.ko] undefined!
WARNING: "request_firmware" [/home/d3ity/0.7/driver/ivtv.ko] undefined!
WARNING: "release_firmware" [/home/d3ity/0.7/driver/ivtv.ko] undefined!
CC /home/d3ity/0.7/driver/ivtv-fb.mod.o
LD [M] /home/d3ity/0.7/driver/ivtv-fb.ko
CC /home/d3ity/0.7/driver/ivtv.mod.o
LD [M] /home/d3ity/0.7/driver/ivtv.ko
make[2]: Leaving directory `/home/d3ity/linux- 2.6.17.1'
make[1]: Leaving directory `/home/d3ity/0.7/driver'
make -C i2c-drivers all
make[1]: Entering directory `/home/d3ity/0.7/i2c-drivers'
make -C /lib/modules/2.6.17.1/build M=/home/d3ity/0.7/i2c-drivers modules
make[2]: Entering directory `/home/d3ity/linux-2.6.17.1'
CC [M] /home/d3ity/0.7/i2c-drivers/saa717x.o
Building modules, stage 2.
MODPOST
CC /home/d3ity/0.7/i2c-drivers/saa717x.mod.o
LD [M] /home/d3ity/0.7/i2c-drivers/saa717x.ko
make[2]: Leaving directory `/home/d3ity/linux-2.6.17.1'
make[1]: Leaving directory `/home/d3ity/0.7/i2c-drivers'
make -C utils all
make[1]: Entering directory `/home/d3ity/0.7/utils'
make -C ../driver ivtv-svnversion.h
make[2]: Entering directory `/home/d3ity/0.7/driver'
created ivtv-svnversion.h
make[2]: Leaving directory `/home/d3ity/0.7/driver'
cc -I/home/d3ity/0.7/utils/../driver -D_GNU_SOURCE -O2 -Wall -c -o
ivtvctl.o ivtvctl.c
ivtvctl.c : In function `main':
ivtvctl.c:1766: error: `V4L2_TUNER_MODE_LANG1_LANG2' undeclared (first use
in this function)ivtvctl.c:1766: error: (Each undeclared identifier is reported only once
ivtvctl.c:1766: error: for each function it appears in.)
make[1]: *** [ivtvctl.o] Error 1make[1]: Leaving directory `/home/d3ity/0.7/utils'
make: *** [all] Error 2
Heres my appropriate lspci entry:
01:08.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Hauppage card, PVR-150 If my memory serves me correctly.
Let me know how I can lend a hand. I'm lost without my mythtv
New Information:
I'm no longer sure if the 0.7 drivers are the source of my compile issues.
I recompiled my kernel, making sure that v4l was in the kernel, and then
went and modprobed bttv, which usually loads up all the relevant v4l drivers (basically a test)
Here's what I got:
bash-3.1# modprobe bttv
WARNING: Error inserting videodev (/lib/modules/2.6.17.1/kernel/drivers/media/video/videodev.ko): Invalid module format
WARNING: Error inserting v4l2_common (/lib/modules/2.6.17.1/kernel/drivers/media/video/v4l2- common.ko): Invalid module format
WARNING: Error inserting compat_ioctl32 (/lib/modules/2.6.17.1/kernel/drivers/media/video/compat_ioctl32.ko): Invalid module format
WARNING: Error inserting ir_common (/lib/modules/2.6.17.1/kernel/drivers/media/common/ir- common.ko): Invalid module format
WARNING: Error inserting video_buf (/lib/modules/2.6.17.1/kernel/drivers/media/video/video-buf.ko): Invalid module format
eek. That looks nasty. my kernel sources were cleaned before the compile...what shalt I do?
simply modprobing videodev just gives me:
bash-3.1# modprobe videodev
FATAL: Error inserting videodev (/lib/modules/2.6.17.1/kernel/drivers/media/video/videodev.ko): Invalid module format
sounds like something broke somewhere along the line. If you could give me some direction as to the solution to this problem I'd be appreciative beyond words.On 6/25/06, David Highley < [EMAIL PROTECTED]> wrote:
FYI, the HD-3000 card currently has no audio for analog channels and is
not able able to play HD channels at all. Fedora core 5 kernel
2.6.17-1.2139_FC5.
"Hans Verkuil wrote:"
>
> Hi all,
>
> I think I committed everything needed to release a ivtv-0.7.0 suitable
> for the 2.6.17 kernel. Nevertheless, I didn't have time left for actual
> testing so I would appreciate it if some of you could do it. So if you
> want to upgrade to a 2.6.17 kernel, then now is the time to do it.
It is failing to compile on Fedora core 5 2.6.17-1.2139_FC5 .
make[2]: Entering directory `/root/ivtv/ivtv-0.7-beta/driver'
created ivtv-svnversion.h
make[2]: Leaving directory `/root/ivtv/ivtv-0.7-beta/driver'
cc -I/root/ivtv/ivtv-0.7-beta/utils/../driver -D_GNU_SOURCE -O2 -Wall -c -o ivtvctl.o ivtvctl.c
ivtvctl.c: In function 'main':
ivtvctl.c:698: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:701: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c :702: error: 'V4L2_SLICED_TELETEXT_B' undeclared (first use in this function)
ivtvctl.c:702: error: (Each undeclared identifier is reported only once
ivtvctl.c:702: error: for each function it appears in.)
ivtvctl.c :704: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:705: error: 'V4L2_SLICED_CAPTION_525' undeclared (first use in this function)
ivtvctl.c:707: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:708: error: 'V4L2_SLICED_WSS_625' undeclared (first use in this function)
ivtvctl.c:710: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:711: error: 'V4L2_SLICED_VPS' undeclared (first use in this function)
ivtvctl.c:1638: error: 'V4L2_BUF_TYPE_SLICED_VBI_CAPTURE' undeclared (first use in this function)
ivtvctl.c:1642: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:1646: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:1657: error: 'union <anonymous>' has no member named 'sliced'
ivtvctl.c:1766: error: 'V4L2_TUNER_MODE_LANG1_LANG2' undeclared (first use in this function)
ivtvctl.c:1803: error: 'VIDIOC_LOG_STATUS' undeclared (first use in this function)
make[1]: *** [ivtvctl.o] Error 1
make[1]: Leaving directory `/root/ivtv/ivtv-0.7-beta/utils'
make: *** [all] Error 2
>
> You can download the prerelease here:
>
> http://ivtvdriver.org/viewcvs/ivtv/branches/0.7.tar.gz?view=tar
>
> I haven't yet updated the README and ChangeLog files, but it is
> effectively identical to ivtv-0.6 except for being updated for the
> 2.6.17 kernel.
>
> Please note: ivtv-0.7.0 is for the 2.6.17 kernel, not for earlier
> kernels. So don't bother downloading this if you are using older
> kernels.
>
> Hans
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
