Ah, sorry about that. I just did a kernel and ivtv update last night again (hoping that would fix it, but it didn't), so I double checked and all the modules are back again.
One other thing I did last night in testing, which I haven't undone yet, was I installed (via yum) the ivtv-firmware-audio package, to see if that would help... but it didn't. Here's the log from recording just now. If the above package messes things up, I will glady remove that and get the log again! [EMAIL PROTECTED] mythtv]# ivtvctl --log-status ioctl VIDIOC_LOG_STATUS ok ivtv0: ================= START STATUS CARD #0 ================= tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP3435 (idx 10) tveeprom 0-0050: has radio tuner 0-0061: Tuner mode: analog TV tuner 0-0061: Frequency: 83.25 MHz tuner 0-0061: Standard: 0x00003000 saa7115 0-0021: Audio frequency: 48000 Hz saa7115 0-0021: Video signal: ok saa7115 0-0021: Frequency: 60 Hz saa7127 0-0044: Standard: 60 Hz saa7127 0-0044: Input: normal saa7127 0-0044: Output: S-Video + Composite saa7127 0-0044: WSS: disabled saa7127 0-0044: VPS: disabled saa7127 0-0044: CC: disabled msp3400 0-0040: MSP3435G-B6 rev1 = 0x0207 rev2 = 0x2346 msp3400 0-0040: Audio: volume 58880 msp3400 0-0040: Audio: balance 32768 bass 32768 treble 32768 loudness off msp3400 0-0040: Standard: 4.5 M BTSC-Stereo (mono) msp3400 0-0040: Audmode: 0x0001 msp3400 0-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 0-0040: ACB: 0x0c00 ivtv0: ================== END STATUS CARD #0 ================== Thanks again for any help!!! Mito -----Original Message----- From: Hans Verkuil [mailto:[EMAIL PROTECTED] Sent: Monday, July 10, 2006 1:55 AM To: Mito Cc: 'User discussion about IVTV' Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and kernel 2.4.17 On Saturday 08 July 2006 19:08, Mito wrote: > Hello all! > > Still having problems here, can't seem to figure this out. I'll sum > up most all of the troubleshooting that I have done the best I can. > > As I said before, everything was working before when running ivtv-6.2 > with kernel 2.4.16. After upgrading to kernel 2.4.17 and ivtv-7.0 I > no longer have any sound in my recordings. > > I just recently purchased my tuner card via ebay not even a month > ago, and it was supposed to be a PVR-150-MCE. I never thought twice > about it and was using it as such. During this troubleshooting I > realized that it is, in fact, a PVR-350-MCE. Good news for me, bad > news for the ebay seller! > > Anyways, that shouldn't make a difference as my understanding is that > they have practically the same encoder, just that the 150 doesn't > have a decoder. I'm not using the decoder on this anyways since it's > in my server and not my frontend, and I don't have the TV/audio out > cable. > > Anyways, here's what I've tried: > > I uninstalled (via yum, which is how I installed them originally) all > ivtv including the modules for both the old ivtv-6.2 and ivtv-7.0. I > then shutdown and unplugged the power to the machine for 5 minutes or > so as someone on this list had suggested to let the power drain from > the tuner. Then I booted it back up and installed ivtv again via the > same howto I originally followed: > http://ivtvdriver.org/index.php/Howto:Fedora > > That still didn't work, so I replaced the firmware: > http://ivtvdriver.org/index.php/Firmware#Obtaining_and_Installing_the >_Firmwa re > > Then I tried manually doing a 'modprobe msp3400' which didn't help > any. > > That still didn't work, so I manually renamed the kernel's modules > pertaining to the tuner and msp3400 and then rebooted again, and it > still didn't work. >From the log below it looks like you still have tuner and msp3400 renamed and so they are not loaded. You must do the --log-status test with these modules loaded! It's especially the msp3400 status I'm interested in. Thanks, Hans > > I have checked, yet again, and the problem is *not* on my frontend > side as I can play my old recordings with sound perfectly fine. The > problem is not in the myth software, as doing a 'cat video0 > > test.mpg' results in a video with no sound as well. Here is the > output of the command Hans requested while doing the mentioned manual > recording command: > > [EMAIL PROTECTED] mythtv]# ivtvctl --log-status > ioctl VIDIOC_LOG_STATUS ok > ivtv0: ================= START STATUS CARD #0 ================= > tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 > tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP3435 (idx 10) > tveeprom 0-0050: has radio > saa7115 0-0021: Audio frequency: 48000 Hz > saa7115 0-0021: Video signal: ok > saa7115 0-0021: Frequency: 60 Hz > saa7127 0-0044: Standard: 60 Hz > saa7127 0-0044: Input: normal > saa7127 0-0044: Output: S-Video + Composite > saa7127 0-0044: WSS: disabled > saa7127 0-0044: VPS: disabled > saa7127 0-0044: CC: disabled > ivtv0: ================== END STATUS CARD #0 ================== > > Here is the related output settings of 'lspci -v' > > 02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 > MPEG-2 Encoder > Subsystem: Hauppauge computer works Inc.: Unknown device 4800 > Flags: bus master, medium devsel, latency 64, IRQ 169 > Memory at f0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > This is all using Redhat FC4, with the current kernel, > 2.6.17-1.2139_FC4 > > If anyone could be of help, that would be fantastic! > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Hans Verkuil > Sent: Saturday, July 01, 2006 5:00 PM > To: User discussion about IVTV > Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and > kernel 2.4.17 > > On Saturday 01 July 2006 22:46, Mito wrote: > > Hello to all! > > > > First of all, thanks to everyone who will help, as I know how much > > work it is sometimes to help people. > > > > My problem first started a few days ago when I was trying to > > re-setup my frontend to my MythTV system. In doing so, I decided > > to do an update to my backend server (which in hindsight, I > > probably shouldn't have done.). It updated my kernel to version > > 2.6.17-1.2139_FC4. Well, as I always do when possible, I rebooted > > my server after doing the update just to make sure things behaved > > properly, and to let the new kernel be used. I left it at this > > time, but then a day and a half later I noticed that none of my > > recordings have been taking place. I do a little troubleshooting > > and do another yum update, and this time find a new ivtv and > > ivtv-modules (I used the atrpms to install ivtv originally) so I > > figure that there is a new version of ivtv for my new kernel, cool, > > this will fix my problem. Well, it did, kinda. Now I am recording > > video, which is always nice, but no audio. Just to be sure that it > > wasn't a MythTV problem, I ran this command: > > > > cat /dev/video0 > test.mpg > > > > Then I played that file, and sure enough, there's video but no > > sound. Also to make sure that I wasn't having problems with my > > sound, I played a recording from before the update, and the sound > > works perfectly. > > > > Then in troubleshooting, I backed up my firmware files and then > > replaced them via the instructions here: > > http://ivtvdriver.org/index.php/Firmware#Obtaining_and_Installing_t > >he _Firmwa re > > > > That still didn't work. so now I'm emailing for help, as I need it > > > > :-) > > > > Here is my dmesg. Thanks in advance for any help you're able to > > give! > > Please provide the output of ivtvctl --log-status while recording a > program. It should give me some info on the sound. > > By the way: can you verify that your card has a saa7114 chip instead > of a saa7115? I noticed this in your log. It's probably quite an old > PVR350, right? If you do have a saa7114, then I'd like to ask you > some tests. Note that this is unrelated to your sound problem, it's > just an issue with the saa7114 that I'd like to clear up. > > Thanks, > > Hans > > > ivtv: no version for "struct_module" found: kernel tainted. > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.7.0 (development snapshot compiled on Thu Jun 29 > > 13:55:05 2006) loading > > ivtv: Linux version: 2.6.17-1.2139_FC4 mod_unload 686 REGPARM > > 4KSTACKS gcc-4.0 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) > > ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ > > 169 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 > > tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) > > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > > tveeprom 0-0050: audio processor is MSP3435 (idx 10) > > tveeprom 0-0050: has radio > > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > saa7115 0-0021: saa7114 found @ 0x42 (ivtv i2c driver #0) > > saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) > > msp3400 0-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) > > msp3400 0-0040: MSP3435G-B6 supports radio, mode is autodetect and > > autoselect > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > > ivtv0: Encoder revision: 0x02050032 > > ivtv0: Decoder revision: 0x02020023 > > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers > > (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 > > buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 > > x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM > > audio stream: 455 x 4608 buffers (2048KB total) > > ivtv0: Create encoder radio stream > > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB > > total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers > > (1024KB total) ivtv0: Create decoder VOUT stream > > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB > > total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > > tuner 0-0061: type set to 21 (Temic NTSC (4039 FR5)) > > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
