Scott, these modules have been merged into the kernel; you need to select them there.
N. On 7/12/06, scott miller <[EMAIL PROTECTED]> wrote: > Technically I've been having this exact same problem since upgrading from a > 2.6.12 kernel (for other hardware) and leaving ivtv 0.4.0. Any help would > be appreciated, I've pretty much exhausted all other avenues of support I > could find. > > Anyway, here's the results of a modprobe from dmesg: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.0 (tagged release) loading > ivtv: Linux version: 2.6.17-gentoo-r2 SMP mod_unload gcc-3.4 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based) > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > GSI 21 sharing vector 0x42 and IRQ 21 > ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) > -> IRQ 66 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: Failed to load module tveeprom > tveeprom 0-0050: Hauppauge model 48011, rev G510, serial# 2670671 > tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP3435 (idx 10) > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > tveeprom 0-0050: has no radio, has IR remote > ivtv0: Failed to load module tuner > ivtv0: Failed to load module tda9887 > ivtv0: Failed to load module saa7115 > ivtv0: Failed to load module msp3400 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: i2c addr 0x21 not found for command 0x4008646f! > ivtv0: i2c hardware 0x00000008 not found for command 0x4008646d! > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: i2c hardware 0x00000008 not found for command 0xc008561c! > ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 > ivtv: ==================== END INIT IVTV ==================== > > It all seems to stemp from the ivtv0: Failed to load module tveeprom line. > For whatever reason tveeprom appears to load and actually does something > after that line regardless of this message. Here's my lsmod: > > Module Size Used by > snd_seq_oss 33408 0 > snd_seq_device 10252 1 snd_seq_oss > snd_seq_midi_event 10880 1 snd_seq_oss > snd_seq 51936 4 snd_seq_oss,snd_seq_midi_event > ivtv 178768 0 > i2c_algo_bit 12296 1 ivtv > v4l1_compat 15108 1 ivtv > tveeprom 19344 1 ivtv > videodev 12928 1 ivtv > i2c_dev 13320 0 > snd_pcm_oss 40992 0 > snd_mixer_oss 18816 1 snd_pcm_oss > snd_intel8x0 34984 0 > snd_ac97_codec 101464 1 snd_intel8x0 > snd_ac97_bus 6656 1 snd_ac97_codec > snd_pcm 82440 3 > snd_pcm_oss,snd_intel8x0,snd_ac97_codec > snd_timer 23560 2 snd_seq,snd_pcm > snd 52552 9 > snd_seq_oss,snd_seq_device,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer > snd_page_alloc 11792 2 snd_intel8x0,snd_pcm > nvidia 5428276 0 > > As you can see tveeprom does actually load and is used by ivtv. However > the other 4 modules that ivtv is supposed to load don't. tuner, tda9887, > saa7115, and msp3400. > > Thanks in advance! > > Scott > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
