I'm getting no audio when using my Hauppauge PVR 150 (non-MCE).
I've tried 2.6.15 and 0.4, and both pvr_1.18.21.22254_inf.zip and
pvr_1.18.21.22301_inf.zip firmwares. I'm using tuner=50 for the ivtv module.
With kernel 2.6.17 I am using 0.7, and have tried both of the above
mentioned firmware versions.
I also tried patching ivtv-driver.c according to jstew's (a friendlt
person in #mythtv-users) to enable the pvr150_workaround. (adding
another itv->pvr150_workaround = 1; at row 515)
mplayer reports
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample).
I've also tried fiddling with ivtvctl.
ivtvctl --set-ctrl=mute=0 -d /dev/video0
has no effect
But after I do ivtvctl --set-audio-input 1
I get some random clicks in both channels, alternating between left and
right. Only when I set it to 1, ivtvctl --log-status says "
cx25840 0-0044: Audio muted: no". But it also says "
cx25840 0-0044: Audio microcontroller: stopped"
With 0 it says Muted: yes, but Running.
Here's the full output of ivtvctl --log-status as it appears on a
default boot:
(23:07:36) [EMAIL PROTECTED]:~$ ivtvctl --log-status
ioctl VIDIOC_LOG_STATUS ok
ivtv0: ================= START STATUS CARD #0 =================
tveeprom 0-0050: Hauppauge model 26034, rev C1B3, serial# 8823954
tveeprom 0-0050: tuner model is TCL M2523_3DB_E (idx 113, type 4)
tveeprom 0-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 0-0050: audio processor is CX25842 (idx 36)
tveeprom 0-0050: decoder processor is CX25842 (idx 29)
tveeprom 0-0050: has no radio, has IR remote
tuner 0-0061: Tuner mode: analog TV
tuner 0-0061: Frequency: 203.25 MHz
tuner 0-0061: Standard: 0x000000ff
cx25840 0-0044: Video signal: present
cx25840 0-0044: Detected format: PAL-BDGHI
cx25840 0-0044: Detected audio mode: mono
cx25840 0-0044: Detected audio standard: not defined
cx25840 0-0044: Audio muted: yes
cx25840 0-0044: Audio microcontroller: running
cx25840 0-0044: Configured audio standard: automatic detection
cx25840 0-0044: Configured audio system: automatic standard and
mode detection
cx25840 0-0044: Specified standard: PAL-BDGHI
cx25840 0-0044: Specified video input: Composite 7
cx25840 0-0044: Specified audio input: Tuner (In8)
cx25840 0-0044: Specified audioclock freq: 48000 Hz
cx25840 0-0044: Preferred audio mode: stereo
cx25840 0-0044: Selected 65 MHz format: autodetect
cx25840 0-0044: Selected 45 MHz format: chroma
wm8775 0-001b: Input: 2
ivtv0: ================== END STATUS CARD #0 ==================
Any help would be greatly appreciated.
Best regards,
Petter Sundlöf
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
