I tested a few scenario's
1) Start mplayer, change channel with ivtv-tune, stop mplayer, start mplayer again etc. Works without a problem. 2) Start mythfrontend "Watch TV", change channel in mythfrontend, exit mythfrontend, start mplayer. The problem occurs. 3) Start mythfrontend "Watch TV", exit mythfrontend, start mythfrontend "Watch TV", change channel, exit "Watch TV", start "Watch TV" the problem occurs 4) Start mythfrontend "Watch TV", change channel with ivtv-tune, exit "Watch TV", start "Watch TV" the problem occurs.
I'm using an Asus K8U-X (ALI chipset) motherboard with a Sempron 3000+ and a PVR150-MCE OEM.
The attachment contains the IVTV startup messages and the debug output (ivtvctl -D21) of scenario 4)
If you need some more testing, please let me know. regards, Johan.
From: Hans Verkuil <[EMAIL PROTECTED]> Reply-To: User discussion about IVTV <[email protected]> To: User discussion about IVTV <[email protected]> Subject: Re: [ivtv-users] PVR-150, 2.6.17, ivtv-0.7 problems redux Date: Sun, 8 Oct 2006 11:14:00 +0200 On Sunday 08 October 2006 04:24, Timothy Brown wrote: > Hi folks, > > I'm having the same problem Preet Khalsa reported on 1 Oct 2006: > > ivtv0 warning: 1000 ms time out waiting for firmware > > ivtv0 warning: Failed api call 0x00000082 with result 0xfffffff0 > > ivtv0 warning: ENC: Failed stopping capture -16 > > ivtv0 warning: 1000 ms time out waiting for firmware > > ivtv0 warning: Failed api call 0x000000c6 with result 0xfffffff0 > > Like Preet, I am on amd64 (in my case, a recent Sempron processor on > VIA chipset). Gentoo is my distribution. I have what I believe is a > relatively old PVR-150: > > driver: ivtv-0.7.0 (tagged release) > card: Hauppauge WinTV PVR-150, bus info 0000:00:09.0, ivtv card > #0 hardware: tuner wm8775 tveeprom > > I suspect but have not confirmed the problem persists in ivtv-0.7.1, > since other users reporting this problem as seen in Google searches > experience it there as well. > > Does anyone have a confirmed fix? Can I provide any debugging > information to assist? Even when TV is viewed for the first time, > the screen is only black (my input is S-Video). OK, let's try to get to the bottom of this. First of all, please upgrade to ivtv-0.7.1. Check if the problem still persists. If so, then please do the following: 1) Try to reproduce outside of MythTV. If you can do that, then please mail the steps you've taken to reproduce it. 2) Mail the INIT IVTV messages. 3) Run ivtvctl -D21 to enable debugging and reproduce the problem (outside of MythTV if possible). Then mail me the debugging output. That should give me a basis for further debugging. I have no problems myself under 64-bit, but I'm not using MythTV. It may be a driver bug that is triggered by MythTV. Regards, Hans _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
_________________________________________________________________Een eigen webpagina voor foto's en weblog in 2 tellen! http://spaces.live.com
ivtv_debug.lst.bz2
Description: BZip2 compressed data
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
