Hello,
I am running a PVR-500 on gentoo, and recently upgraded to
2.6.18-gentoo-r1 and the ivtv .80 from portage. Trying to capture from my
Dish Network receiver using the s-video and RCA audio inputs on the card,
I get video, but no audio. I have tried capturing from mythtv, and by `cat
/dev/v4l/video0`. Running these inputs directly into the TV, I do
get audio. Its probably something silly I'm missing, so any help is
appreciated. Thanks,
Claude

myth ~ # v4l2-ctl --log-status

Status Log:

   ivtv0: =================  START STATUS CARD #0  =================
   tveeprom 0-0050: Hauppauge model 23552, rev D492, serial# 7844535
   tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
   tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
   tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx
101, type 62)
   tveeprom 0-0050: audio processor is CX25843 (idx 37)
   tveeprom 0-0050: decoder processor is CX25843 (idx 30)
   tveeprom 0-0050: has radio, has no IR remote
   tda9887 0-0043: Data bytes: b=0xd4 c=0x30 e=0x44
   tuner 0-0060: Tuner mode:      undefined
   tuner 0-0060: Frequency:       0.00 MHz
   tuner 0-0060: Standard:        0x00000000
   tuner 0-0061: Tuner mode:      analog TV
   tuner 0-0061: Frequency:       67.25 MHz
   tuner 0-0061: Standard:        0x0000b000
   cx25840 0-0044: Video signal:              present
   cx25840 0-0044: Detected format:           NTSC-M
   cx25840 0-0044: Specified standard:        NTSC-M
   cx25840 0-0044: Specified video input:     S-Video (Luma In1, Chroma
In5)
   cx25840 0-0044: Specified audioclock freq: 48000 Hz
   cx25840 0-0044: Detected audio mode:       forced mode
   cx25840 0-0044: Detected audio standard:   no detected audio standard
   cx25840 0-0044: Audio muted:               no
   cx25840 0-0044: Audio microcontroller:     stopped
   cx25840 0-0044: Configured audio standard: automatic detection
   cx25840 0-0044: Configured audio system:   BTSC
   cx25840 0-0044: Specified audio input:     External
   cx25840 0-0044: Preferred audio mode:      stereo
   wm8775 0-001b: Input: 2
   ivtv0: Stream: MPEG-2 Program Stream
   ivtv0: Video:  720x480, 30 fps
   ivtv0: Video:  MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000
   ivtv0: Video:  GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown
   ivtv0: Audio:  48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC
   ivtv0: Spatial Filter:  Manual, Luma 1D Horizontal, Chroma 1D
Horizontal, 0
   ivtv0: Temporal Filter: Manual, 0
   ivtv0: Median Filter:   Off, Luma [0, 255], Chroma [0, 255]
   ivtv0: ==================  END STATUS CARD #0  ==================


-Dmesg Output

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.8.0 (tagged release) loading
ivtv:  Linux version: 2.6.18-gentoo-r1 mod_unload PENTIUM4 gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 12 (level, low)
-> IRQ 12
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tveeprom 0-0050: Hauppauge model 23552, rev D492, serial# 7844535
tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx
101, type 62)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio, has no IR remote
ivtv0: This is the first unit of a PVR500
tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0060: TEA5767 detected.
tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
tuner 0-0061: type set to 57 (Philips FQ1236A MK4)
ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, low)
-> IRQ 10
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 7844535
tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx
101, type 62)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR remote
ivtv1: This is the second unit of a PVR500
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Encoder revision: 0x02050032
ivtv1: Registered device video1 for encoder MPEG
ivtv1: Registered device video33 for encoder YUV
ivtv1: Registered device vbi1 for encoder VBI
ivtv1: Registered device video25 for encoder PCM audio
tuner 1-0061: type set to 57 (Philips FQ1236A MK4)
ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
ivtv:  ====================  END INIT IVTV  ====================

myth ~ # lsmod
Module                  Size  Used by
snd_pcm_oss            26400  0
snd_mixer_oss          16256  1 snd_pcm_oss
snd_seq_oss            30720  0
snd_seq_midi_event      6016  1 snd_seq_oss
snd_seq                45392  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6668  2 snd_seq_oss,snd_seq
i2c_sis96x              4868  0
lirc_atiusb            16416  1
lirc_dev               12260  1 lirc_atiusb
wm8775                  5260  0
cx25840                26000  0
tuner                  61608  0
ivtv                  178448  0
i2c_algo_bit            8712  1 ivtv
cx2341x                10372  1 ivtv
tveeprom               14096  1 ivtv
i2c_core               17040  7
i2c_sis96x,wm8775,cx25840,tuner,ivtv,i2c_algo_bit,tveeprom
videodev               23808  1 ivtv
v4l1_compat            13572  2 ivtv,videodev
v4l2_common            20992  5 cx25840,tuner,ivtv,cx2341x,videodev
snd_intel8x0           29596  0
snd_ac97_codec         92320  1 snd_intel8x0
snd_ac97_bus            2176  1 snd_ac97_codec
snd_pcm                63496  3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer              19844  2 snd_seq,snd_pcm
snd                    43364  9
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc          8072  2 snd_intel8x0,snd_pcm
b44                    23052  0



_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to