What command do you use to switch to the Composite or S-Vid input?
Hans
On Monday 06 November 2006 18:08, Claude M. Schrader wrote:
> Hi,
> I tried adding options ivtv newi2c=0 to modules.conf, with still no
> audio using the s-video and RCA inputs. I also tried using the newest
> firmware from Hauppage's ftp site, instead of the one in portage.
> Anyone have any other thoughts? I suppose I could just try using the
> coax input tonite, though I would like to get the s-vid working.
> Claude
>
> myth ~ # cat /etc/modules.d/ivtv
> #alias char-major-81 videodev
> #alias char-major-81-0 ivtv
> #alias char-major-81-1 ivtv
> #alias char-major-61 lirc_i2c
> options ivtv newi2c=0
>
> On Wed, Nov 01, 2006 at 01:25:13PM -0500, Claude M. Schrader wrote:
> > Hello,
> > I am running a PVR-500 on gentoo, and recently upgraded to
> > 2.6.18-gentoo-r1 and the ivtv .80 from portage. Trying to capture
> > from my Dish Network receiver using the s-video and RCA audio
> > inputs on the card, I get video, but no audio. I have tried
> > capturing from mythtv, and by `cat /dev/v4l/video0`. Running these
> > inputs directly into the TV, I do get audio. Its probably something
> > silly I'm missing, so any help is appreciated. Thanks,
> > Claude
> >
> > myth ~ # v4l2-ctl --log-status
> >
> > Status Log:
> >
> > ivtv0: ================= START STATUS CARD #0
> > ================= tveeprom 0-0050: Hauppauge model 23552, rev D492,
> > serial# 7844535 tveeprom 0-0050: tuner model is Philips FQ1236A MK4
> > (idx 92, type 57) tveeprom 0-0050: TV standards NTSC(M) (eeprom
> > 0x08)
> > tveeprom 0-0050: second tuner model is Philips TEA5768HL FM
> > Radio (idx 101, type 62)
> > tveeprom 0-0050: audio processor is CX25843 (idx 37)
> > tveeprom 0-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 0-0050: has radio, has no IR remote
> > tda9887 0-0043: Data bytes: b=0xd4 c=0x30 e=0x44
> > tuner 0-0060: Tuner mode: undefined
> > tuner 0-0060: Frequency: 0.00 MHz
> > tuner 0-0060: Standard: 0x00000000
> > tuner 0-0061: Tuner mode: analog TV
> > tuner 0-0061: Frequency: 67.25 MHz
> > tuner 0-0061: Standard: 0x0000b000
> > cx25840 0-0044: Video signal: present
> > cx25840 0-0044: Detected format: NTSC-M
> > cx25840 0-0044: Specified standard: NTSC-M
> > cx25840 0-0044: Specified video input: S-Video (Luma In1,
> > Chroma In5)
> > cx25840 0-0044: Specified audioclock freq: 48000 Hz
> > cx25840 0-0044: Detected audio mode: forced mode
> > cx25840 0-0044: Detected audio standard: no detected audio
> > standard cx25840 0-0044: Audio muted: no
> > cx25840 0-0044: Audio microcontroller: stopped
> > cx25840 0-0044: Configured audio standard: automatic detection
> > cx25840 0-0044: Configured audio system: BTSC
> > cx25840 0-0044: Specified audio input: External
> > cx25840 0-0044: Preferred audio mode: stereo
> > wm8775 0-001b: Input: 2
> > ivtv0: Stream: MPEG-2 Program Stream
> > ivtv0: Video: 720x480, 30 fps
> > ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 6000000, Peak
> > 8000000 ivtv0: Video: GOP Size 15, 2 B-Frames, GOP Closure, No 3:2
> > Pulldown ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No
> > Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D
> > Horizontal, Chroma 1D Horizontal, 0
> > ivtv0: Temporal Filter: Manual, 0
> > ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255]
> > ivtv0: ================== END STATUS CARD #0
> > ==================
> >
> >
> > -Dmesg Output
> >
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.8.0 (tagged release) loading
> > ivtv: Linux version: 2.6.18-gentoo-r1 mod_unload PENTIUM4 gcc-3.4
> > ivtv: In case of problems please include the debug info between
> > ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv: any module options, when mailing the ivtv-users mailinglist.
> > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKC] -> GSI 12
> > (level, low) -> IRQ 12
> > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > tveeprom 0-0050: Hauppauge model 23552, rev D492, serial# 7844535
> > tveeprom 0-0050: tuner model is Philips FQ1236A MK4 (idx 92, type
> > 57) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio
> > (idx 101, type 62)
> > tveeprom 0-0050: audio processor is CX25843 (idx 37)
> > tveeprom 0-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 0-0050: has radio, has no IR remote
> > ivtv0: This is the first unit of a PVR500
> > tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 0-0060: TEA5767 detected.
> > tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
> > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ivtv0: Encoder revision: 0x02050032
> > ivtv0: Registered device video0 for encoder MPEG
> > ivtv0: Registered device video32 for encoder YUV
> > ivtv0: Registered device vbi0 for encoder VBI
> > ivtv0: Registered device video24 for encoder PCM audio
> > ivtv0: Registered device radio0 for encoder radio
> > tuner 0-0061: type set to 57 (Philips FQ1236A MK4)
> > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> > ivtv: ====================== NEXT CARD ======================
> > ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10
> > (level, low) -> IRQ 10
> > ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
> > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1)
> > tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
> > tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 7844535
> > tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type
> > 57) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio
> > (idx 101, type 62)
> > tveeprom 1-0050: audio processor is CX25843 (idx 37)
> > tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 1-0050: has radio, has no IR remote
> > ivtv1: This is the second unit of a PVR500
> > ivtv1: Correcting tveeprom data: no radio present on second unit
> > ivtv1: Encoder revision: 0x02050032
> > ivtv1: Registered device video1 for encoder MPEG
> > ivtv1: Registered device video33 for encoder YUV
> > ivtv1: Registered device vbi1 for encoder VBI
> > ivtv1: Registered device video25 for encoder PCM audio
> > tuner 1-0061: type set to 57 (Philips FQ1236A MK4)
> > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> > ivtv: ==================== END INIT IVTV ====================
> >
> > myth ~ # lsmod
> > Module Size Used by
> > snd_pcm_oss 26400 0
> > snd_mixer_oss 16256 1 snd_pcm_oss
> > snd_seq_oss 30720 0
> > snd_seq_midi_event 6016 1 snd_seq_oss
> > snd_seq 45392 4 snd_seq_oss,snd_seq_midi_event
> > snd_seq_device 6668 2 snd_seq_oss,snd_seq
> > i2c_sis96x 4868 0
> > lirc_atiusb 16416 1
> > lirc_dev 12260 1 lirc_atiusb
> > wm8775 5260 0
> > cx25840 26000 0
> > tuner 61608 0
> > ivtv 178448 0
> > i2c_algo_bit 8712 1 ivtv
> > cx2341x 10372 1 ivtv
> > tveeprom 14096 1 ivtv
> > i2c_core 17040 7
> > i2c_sis96x,wm8775,cx25840,tuner,ivtv,i2c_algo_bit,tveeprom
> > videodev 23808 1 ivtv
> > v4l1_compat 13572 2 ivtv,videodev
> > v4l2_common 20992 5 cx25840,tuner,ivtv,cx2341x,videodev
> > snd_intel8x0 29596 0
> > snd_ac97_codec 92320 1 snd_intel8x0
> > snd_ac97_bus 2176 1 snd_ac97_codec
> > snd_pcm 63496 3
> > snd_pcm_oss,snd_intel8x0,snd_ac97_codec snd_timer
> > 19844 2 snd_seq,snd_pcm
> > snd 43364 9
> > snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_in
> >tel8x0,snd_ac97_codec,snd_pcm,snd_timer snd_page_alloc 8072
> > 2 snd_intel8x0,snd_pcm
> > b44 23052 0
> >
> >
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
