Hello, I had a similar problem with the 0.8.0, try the newi2c=0 parameter, my card doesn't work with the new I2C implementation, maybe yours also not.
Regards, Dirk Am Donnerstag, 2. November 2006 00:15 schrieb steve reilly: > Hi all, > > > still trying to get tv here......... last reply said i had no > tveeprom.......... i still dont see it, even after re installing ivtv 5 > times. can anyone tell me what tuner type i should use for the 150 card? > i have searched until blue in the face, and cannot find a listing of tuner > types on the ivtv site. > > is there something missing here, and how do i get it? > > thank you. > > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.6.4 (tagged release) loading > ivtv: Linux version: 2.6.16.21-0.25-smp SMP 586 REGPARM gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 > ivtv: ==================== END INIT IVTV ==================== > linux-steve:/home/steve/Desktop/ivtv-0.6.4 # _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
