Hi hans,
this is the output of lsmod.......... no tveeprom. wondering....... why in
the world is it not there, if i installed the ivtv package?
would you know the correct command for what you were speaking of for the
newi2c=0 ?
maybe modprobe ivtv newi2c=0 ?
do i maybe need 2.6.17 kernel?
thanks for your help.
Module Size Used by
raw1394 29164 0
dv1394 22732 0
appletalk 41388 0
ax25 60880 0
ipx 33956 0
p8023 6016 1 ipx
nls_iso8859_1 8064 1
nls_cp437 9728 1
snd_rtctimer 7436 1
snd_seq_dummy 7556 0
ipv6 243296 14
snd_pcm_oss 47104 0
snd_mixer_oss 20224 1 snd_pcm_oss
snd_seq 53104 2 snd_seq_dummy
af_packet 28296 2
edd 12484 0
button 10640 0
battery 13444 0
ac 8964 0
apparmor 54552 0
aamatch_pcre 17408 1 apparmor
vfat 16000 1
fat 51100 1 vfat
loop 19464 0
sg 35612 0
usbhid 44640 0
dm_mod 57680 0
usb_storage 74432 1
snd_via82xx 30488 4
gameport 18568 1 snd_via82xx
ohci1394 34224 1 dv1394
snd_ac97_codec 87072 1 snd_via82xx
snd_ac97_bus 6144 1 snd_ac97_codec
snd_pcm 86532 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 25860 3 snd_rtctimer,snd_seq,snd_pcm
snd_page_alloc 13576 2 snd_via82xx,snd_pcm
snd_mpu401_uart 11392 1 snd_via82xx
snd_rawmidi 28032 1 snd_mpu401_uart
shpchp 43616 0
ieee1394 93368 3 raw1394,dv1394,ohci1394
snd_seq_device 11916 3 snd_seq_dummy,snd_seq,snd_rawmidi
pci_hotplug 28604 1 shpchp
snd 56708 20
snd_rtctimer,snd_seq_dummy,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 13024 1 snd
via_agp 13440 1
agpgart 33352 1 via_agp
cx25840 24848 0
ide_cd 39712 1
firmware_class 13824 1 cx25840
cdrom 36512 1 ide_cd
ehci_hcd 31880 0
uhci_hcd 32400 0
via_rhine 25860 0
mii 9088 1 via_rhine
i2c_viapro 11924 0
usbcore 115716 5 usbhid,usb_storage,ehci_hcd,uhci_hcd
i2c_core 23680 2 cx25840,i2c_viapro
parport_pc 39524 1
lp 14756 0
parport 36936 2 parport_pc,lp
reiserfs 216576 2
fan 8580 0
thermal 17416 0
processor 31208 1 thermal
via82cxxx 12164 0 [permanent]
sata_via 12164 0
libata 69776 1 sata_via
sd_mod 20352 2
scsi_mod 127880 4 sg,usb_storage,libata,sd_mod
ide_disk 19072 4
ide_core 122700 4 usb_storage,ide_cd,via82cxxx,ide_disk
[EMAIL PROTECTED]:~>
> If you run 'lsmod', does that contain an entry 'tveeprom'?
>
> There is also a small chance as someone else mentioned that you have to
> add the 'newi2c=0' module option when loading ivtv.
>
> Regards,
>
> Hans
>
> On Thursday 02 November 2006 00:15, steve reilly wrote:
> > Hi all,
> >
> >
> > still trying to get tv here......... last reply said i had no
> > tveeprom.......... i still dont see it, even after re installing
> > ivtv 5 times. can anyone tell me what tuner type i should use for
> > the 150 card? i have searched until blue in the face, and cannot
> > find a listing of tuner types on the ivtv site.
> >
> > is there something missing here, and how do i get it?
> >
> > thank you.
> >
> >
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.6.4 (tagged release) loading
> > ivtv: Linux version: 2.6.16.21-0.25-smp SMP 586 REGPARM gcc-4.1
> > ivtv: In case of problems please include the debug info between
> > ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv: any module options, when mailing the ivtv-users mailinglist.
> > ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv0: Encoder revision: 0x02050032
> > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> > total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> > (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
> > buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> > 455 x 4608 buffers (2048KB total)
> > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> > ivtv: ==================== END INIT IVTV ====================
> > linux-steve:/home/steve/Desktop/ivtv-0.6.4 #
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
--
Powered by: SuSE Linux 10.1 ~ Kernel 2.6.16.21-0.25-smp #1 ~ Kmail 1.9 ~
Registered Linux user: 412217
http://reillyblog.com
5:48pm up 10:23, 2 users, load average: 0.52, 0.47, 0.31
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
