I just upgraded to ivtv-0.8.0 from the 0.4.x version which was working
perfectly. I have two PVR-250s in my slave backend that will no longer
display video. I have even tried the most recent svn version of 0.8.x
and I have the same result. If I cat /dev/video0 > foo.mpg, the file has
the correct audio but the video is blank. Here is dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.1 (development snapshot compiled on Thu Nov 16
23:42:33 2006) loading
ivtv: Linux version: 2.6.18-gentoo-r2 preempt mod_unload K7 gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt 0000:05:09.0[A] -> Link [LNKB] -> GSI 5 (level, low)
-> IRQ 5
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tveeprom 0-0050: Hauppauge model 32062, rev C199, serial# 8510215
tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is MSP3445 (idx 12)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has no radio, has IR remote
ivtv0: Autodetected Hauppauge WinTV PVR-250
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 0-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 0-0040: MSP3445G-B8 supports radio, mode is autodetect and
autoselect
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
tuner 0-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #1)
msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #1)
msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and
autoselect
tveeprom 1-0050: Hauppauge model 32062, rev C199, serial# 8245573
tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP3445 (idx 12)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
ivtv1: Autodetected Hauppauge WinTV PVR-250
ivtv1: Encoder revision: 0x02050032
ivtv1: Registered device video1 for encoder MPEG
ivtv1: Registered device video33 for encoder YUV
ivtv1: Registered device vbi1 for encoder VBI
ivtv1: Registered device video25 for encoder PCM audio
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv1: Initialized Hauppauge WinTV PVR-250, card #1
ivtv: ==================== END INIT IVTV ====================
and:
$ ivtv-detect
driver: ivtv-0.8.1
card: Hauppauge WinTV PVR-250, bus info 0000:05:09.0
/dev/v4l/video32: YUV encoding (links: /dev/video0, /dev/video24,
/dev/video32)
/dev/v4l/vbi0: VBI encoding (links: /dev/vbi0)
driver: ivtv-0.8.1
card: Hauppauge WinTV PVR-250, bus info 0000:05:0a.0
/dev/v4l/video33: YUV encoding (links: /dev/video1, /dev/video25,
/dev/video33)
/dev/v4l/vbi1: VBI encoding (links: /dev/vbi1)
I am using a 2.6.18-gentoo-r2 kernel. I have also tried shutting the
machine down for more then 30 seconds. Something strange is happening,
because I have tried to downgrade to ivtv-0.7.1 and I now get the same
result with it. What am I missing?
--
Matthew Daubenspeck
http://oddprocess.org
Gentoo Linux x86_64 Dual Core AMD Opteron(tm) Processor 165
23:54:06 up 49 days, 2:44, 1 user, load average: 0.01, 0.05, 0.05
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
