Hi there! I'm having issues getting my PVR-150 to output the correct audio. Video comes in just fine, but the audio sounds like an analog TV set to an unknown frequency (nothing but static). This happens on all channels. Naturally, same sound exists when I do aplay -f dat /dev/video25 (I have the card set to /dev/video1).
I tried the firmware from both http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz and ftp://ftp.hauppauge.com/Support/PVR150/Beta/060418%20amity2%202.0.43.24108.prerelease.zip with no luck. I connected the line-in and switched to that. Audio comes in fine... so that tells me the static is specific to the tuner input '0' One more data point is that the audio suddenly worked one day and worked fine for about 3 weeks (not sure if it's coincidental, but it began working after I plugged in a line-in). But unfortunately, it stopped working yesterday again (and plugging in line-in doesn't fix it). Same issue exists with the 0.8 version. Everything works fine in Windows. Any help or guidance would be great! Here's my info. --------------------------------- lspci output: 02:0d.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 Flags: bus master, medium devsel, latency 64, IRQ 23 Memory at d8000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 ----------------------------------- dmesg output ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.1 (tagged release) loading ivtv: Linux version: 2.6.18 SMP preempt mod_unload PENTIUM4 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) PCI: Enabling device 0000:02:0d.0 (0010 -> 0012) ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 23 ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) tveeprom 2-0050: Hauppauge model 26032, rev C199, serial# 8238526 tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: audio processor is CX25841 (idx 35) tveeprom 2-0050: decoder processor is CX25841 (idx 28) tveeprom 2-0050: has no radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: reopen i2c bus for IR-blaster support tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video1 for encoder MPEG ivtv0: Registered device video33 for encoder YUV ivtv0: Registered device vbi1 for encoder VBI ivtv0: Registered device video25 for encoder PCM audio tuner 2-0061: type set to 50 (TCL 2002N) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== <ftp://ftp.hauppauge.com/Support/PVR150/Beta/060418%20amity2%202.0.43.24108.prerelease.zip> Please let me know if anything else is needed. Thanks, Dave
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
