Ever since I upgraded to FC6 and the 2.6.18 kernel, this problem is plaguing me.
In the past, my PVR150 would freeze the firmware if you changed channels when watching live TV in Myth. Since then the 150 is a prerecorded only tuner. However now I get the above error on my 150 and 250. The 250 is on an s-video input and the 150 on tuner 1. I have a 150, 250 and an HD3000 in my machine. It is an x86_64 x2 so there is lots of horsepower. All was fine in previous releases (except what is mentioned about). I changed the mythtv disk from reiserfs to xfs. No change. Since this seems to be a buffer problem, I added to my modprobe.conf ... alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv options ivtv yuv_buffers=32 mpg_buffers=16 vbi_buffers=16 pcm_buffers=16 ivtv_first_minor=1 According to modules.txt, those are the max values. The ivtv_first_minor has been added because since I went to FC6, the HD3000 sets its devices at random times and myth does not like videoX moving around. Dmesg is as follows. I left the interlaced messages from other devices in there in case there might be a conflict. Please let me know what else I can do to debug this problem. Preet ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.2 (tagged release) loading ivtv: Linux version: 2.6.18-1.2849.fc6 SMP mod_unload gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 193 cx2388x dvb driver version 0.0.6 loaded cx2388x v4l2 driver version 0.0.6 loaded ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tveeprom 1-0050: Hauppauge model 26552, rev B268, serial# 7832899 tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has radio, has no IR remote ivtv0: Autodetected Hauppauge WinTV PVR-150 tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Vendor: USB2.0 Model: CardReader CF RW Rev: 0814 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi generic sg2 type 0 Vendor: USB2.0 Model: CardReader Combo Rev: 0814 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:1: Attached scsi removable disk sdd sd 2:0:0:1: Attached scsi generic sg3 type 0 usb-storage: device scan complete cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video1 for encoder MPEG ivtv0: Registered device video33 for encoder YUV ivtv0: Registered device vbi1 for encoder VBI ivtv0: Registered device video25 for encoder PCM audio ivtv0: Registered device radio1 for encoder radio tuner 1-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 201 CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe tuner 2-0043: chip found @ 0x86 (cx88[0]) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0061: chip found @ 0xc2 (cx88[0]) tuner 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC)) cx88[0]/0: found at 0000:00:07.0, rev: 5, irq: 201, latency: 64, mmio: 0xf9000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:11.5 to 64 ACPI: PCI Interrupt 0000:00:07.2[A] -> GSI 18 (level, low) -> IRQ 201 cx88[0]/2: found at 0000:00:07.2, rev: 5, irq: 201, latency: 64, mmio: 0xf8000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193 ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 3-0050: Hauppauge model 32032, rev B326, serial# 7194627 tveeprom 3-0050: tuner model is Temic 4036FY5 (idx 26, type 8) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: audio processor is MSP4448 (idx 27) tveeprom 3-0050: decoder processor is SAA7115 (idx 19) tveeprom 3-0050: has no radio, has IR remote ivtv1: Autodetected Hauppauge WinTV PVR-250 saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1) msp3400 3-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect ivtv1: Encoder revision: 0x02050032 ivtv1: Registered device video2 for encoder MPEG ivtv1: Registered device video34 for encoder YUV ivtv1: Registered device vbi2 for encoder VBI ivtv1: Registered device video26 for encoder PCM audio tuner 3-0061: type set to 8 (Temic NTSC (4036 FY5)) ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
