Don't mean to be impatient and bump this one... but has anyone seen this problem with the combination I have listed?... Hans... can you weigh in on this issue at all? I intend to do consecutive downgrading until I find a working combination...
Thanks, Andy On 12/16/06, Andy Speagle <[EMAIL PROTECTED]> wrote:
On 12/16/06, Sander Sweers <[EMAIL PROTECTED]> wrote: > > On 12/16/06, Andy Speagle <[EMAIL PROTECTED]> wrote: > > Ok... so my system has recently stopped booting with the latest 0.8ivtv > > versions. I am using udev-103. I believe something in the latest 0.8and > > 0.9 ivtv that's confounding udev... I set the logging level to udev to > > "debug" and that's indeed where the boot process stops. > > Probably the coldplug feature is already loading the modules. Does it > work without the ivtv module installed? > > [1] http://ivtvdriver.org/index.php/Troubleshooting > [2] http://ivtvdriver.org/index.php/Asking_for_help Ok, well... with udev-103... coldplug must be removed, but the "coldplug" feature of udev is indeed trying to load the module(s). One new thing I have learned... that I don't have a problem with the PVR-500 by itself. But, the PVR-350's lock up if present when udev loads the module. I currently am running ivtv version 0.9.1 .. on kernel 2.6.19-gentoo-r2 "lspci -v" 00:0a.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at c8000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 00:0b.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Flags: bus master, medium devsel, latency 32, IRQ 7 Memory at cc000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 500 (1st unit) Flags: bus master, medium devsel, latency 32, IRQ 5 Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 500 (2nd unit) Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at d4000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 I can't give any good output of the ivtv module load... since if I try to load the ivtv module while one of the PVR-350's is present... my system completely hard-locks. Please advise. Andy _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users >
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
