On 1/29/07, David Fishburn <[EMAIL PROTECTED]> wrote: > > ivtv 0.8.1 > Ubuntu Edgy > Kernel 2.6.18.155 > > I am using a Hauppauge PVR 500 MCE edition. > I have the silver and black remote working great with lirc_mceusb2. > > I also have a DirecTV remote (RCA D770) which I also want to get working. > Using the vcr1 button, I have just about everything working as well. > Here is the picture of the remote: > http://lirc.sourceforge.net/remotes/rca/D770.jpg > > And the codes for it: > http://lirc.sourceforge.net/remotes/rca/D770
You problem is not with IVTV but with lirc. Better ask the lirc mailing list for help. Greets Sander > I have 1 outstanding issue. > > When I press the Volume up and down buttons it appears to have changed the > code that was part of the above download. The remote allows you to control > up to 6 devices. I have an older 27" Sony TV. We use it to control the TV. > Once you set the TV codes up for the Sony, it appears that in all other > modes (vcr1, vcr2, dvd, aux, satelite) the volume up and down still control > the TV. > > If I spark up irw and press the volume buttons nothing is registered. > > How can I actually figure out what code is being sent from the remote? I > will just update the lircd.conf file with that code and allow it to control > both the TV and the volume for Myth. That is a reasonable work around > (unless someone has better ideas). > > lirc_mceusb2 is automatically loaded on boot, when I issued a:\ > [EMAIL PROTECTED]:/usr/src$ sudo mode2 -d /dev/lirc0 > mode2: error opening /dev/lirc0 > mode2: Device or resource busy > > > I am not sure how to unload it so that I can perform additional tests. > > Any suggestions greatly appreciated. > > Dave _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
