What about the ivtv-fb and saa7127 incompatibility. since update to 0.10-1 the only way to what tv on my pvr350 is dd if=/dev/video0 of=/dev/video16
Can't load ivtv-fb if saa7127 is loaded but ivtv-fb load fine if I remove the saa7127. I've tried to recompile only the saa7127.ko but it hang the computer on reboot. Does anyone have a working solution to be able to load these module or should I downgrade to ivtv 0.9-8 > > Yes, this could well be the case. Also try disabling VBI support and see > if that makes a difference. I suspect the reason for the problems is > that the VBI support does PIO accesses inside the interrupt routine, > and this means the interrupt takes too long. I have a patch moving the > PIO accesses outside the interrupt routine in order to reduce the time > spent in there. It needs a bit more work, though, before I can make it > available for testing. > > Regards, > > Hans > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users -- ----- Claude Gélinas agr., dta Phyto Ressources inc. ============================================================================== Varennes, Québec, Canada Tél.: (450) 652 9764, Fax.:(450) 652 6182 Des questions sur les insectes et maladies des plantes ornementales ? Want to know more about ornamental plant pest ? http://www.phyto.qc.ca _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
