just to chime in with what others have said, downgrading
my kernel took care of the chipmunk voices.  i'm still
getting the flicker, though.   i really may have to give
up and throw a faster computer at myth.

for the record my non-working kernel was from this debian
package:
  linux-image-2.6.18-4-k7, version 2.6.18.dfsg.1-11
  ( linux-image-2.6.18-4-k7_2.6.18.dfsg.1-11_i386.deb )

and the "working" one was from:
  linux-image-2.6.18-3-k7, version 2.6.18-7
  ( linux-image-2.6.18-3-k7_2.6.18-7_i386.deb )

if developers are interested, i'd be happy to help track
down what changed between those.

--Rob


On Mon, Mar 26, 2007 at 01:55:58AM -0700, Rob Starling wrote:
> fwiw, i'm also getting the "chipmunk voices" problem
> on occasion.
> 
> Thanks!
> --Rob
> 
> On Sat, Mar 24, 2007 at 04:12:27PM -0700, Rob Starling wrote:
> > Hi all!  I have a PVR-150 (a real one) and it worked fine
> > until i moved to to another (older) computer.  Now there is
> > some flicker (not a whole lot, but enough to be annoying)
> > in recordings (both from mythtv and from cat /dev/video0).
> > 
> > I tried increasing increasing the latency_timer for my IDE
> > controller (setpci -v -s 00:11.1 latency_timer=80) as per
> > the advice at http://www.mythtv.org/wiki/index.php/PCI_Latency
> > but that didn't seem to help much.  (default on my system is
> > 32, ivtv bumps the PVR-150 up to 64, so i set the IDE at 128)
> > 
> > Does anybody have suggestions for settings i should poke at?
> > 
> > My dmesg output follows, but appears normal.  Also, i should
> > mention that the previous (working!) box was using almost
> > exactly the same kernel (2.6.18-3-k7 SMP) and was using
> > ivtv-0.10.0rc1.  The current box is a little slower (1.4GHz
> > Athlon instead of 1.7GHz) and has an older motherboard.
> > ide0 isn't sharing an interrupt with anything, and ivtv0 is
> > sharing IRQ 5 with USB (not used) and my soundcard (also not
> > used during this test).
> > 
> > Thanks!
> > --Rob
> > 
> > ivtv:  ==================== START INIT IVTV ====================
> > ivtv:  version 0.10.1 (tagged release) loading
> > ivtv:  Linux version: 2.6.18-4-k7 SMP mod_unload K7 REGPARM gcc-4.1
> > ivtv:  In case of problems please include the debug info between
> > ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv:  any module options, when mailing the ivtv-users mailinglist.
> > ivtv0: Autodetected Hauppauge card (cx23416 based)
> > ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> 
> > IRQ 5
> > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > input: ImPS/2 Generic Wheel Mouse as /class/input/input2
> > ts: Compaq touchscreen protocol output
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> > ivtv0: Encoder revision: 0x02060039
> > tveeprom 1-0050: Hauppauge model 26132, rev G1B2, serial# 9831694
> > tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
> > tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> > tveeprom 1-0050: audio processor is CX25841 (idx 35)
> > tveeprom 1-0050: decoder processor is CX25841 (idx 28)
> > tveeprom 1-0050: has no radio, has IR remote
> > ivtv0: Autodetected Hauppauge WinTV PVR-150
> > ivtv0: reopen i2c bus for IR-blaster support
> > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
> > cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ivtv0: Registered device video0 for encoder MPEG (4 MB)
> > ivtv0: Registered device video32 for encoder YUV (2 MB)
> > ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> > ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> > tuner 1-0061: type set to 50 (TCL 2002N)
> > ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> > ivtv:  ====================  END INIT IVTV  ====================
> > ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> 
> > IRQ 5

-- 
/-------------------------------------------------------------\
| "If we couldn't laugh we would all go insane"               |
|              --Jimmy Buffett,                               |
|                "Changes in Latitudes, Changes in Attitudes" |
\-------------------------------------------------------------/

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to