yugandhar gv wrote:
Hi ,
I have the problem when capturing the video from the card. Can u
just tell me how u have created the device file /dev/video0 for that we
have install some module are what.
when i do the same step i am getting the following error:
cat /dev/video0 > test.mpg
Error: /dev/video0 No such device
What kind of video card are you trying to capture video from? Are you
using a Hauppauge PVR-150/PVR-250/PVR-350/PVR-500? Or do you have
some other kind of card?
The lspci -v command should show what kind of card you have:
02:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 250
Flags: bus master, medium devsel, latency 64, IRQ 209
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 150
Flags: bus master, medium devsel, latency 64, IRQ 217
Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
If you have one of the Hauppauge cards, then you will need to
install the ivtv modules (usually, if you have the modules built,
you can just do a 'modprobe ivtv'). If you are already doing
this, then please do a 'dmesg', and cut/paste the portion of the
dmesg output between the 'START INIT IVTV' and
'END INIT IVTV' messages.
begin:vcard
fn:Mark Paulus
n:Paulus;Mark
org:MCI;Lec Interfaces / 40419
adr;dom:;;2424 Garden of the Gods Rd;Colorado Springs;CO;80919
email;internet:[EMAIL PROTECTED]
title:Mark Paulus
tel;work:719-535-5578
tel;pager:800-pagemci / 1406052
tel;home:v622-5578
version:2.1
end:vcard
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
