Hans Verkuil wrote:
> On Saturday 21 July 2007 00:02:10 Rod wrote:
>   
>> Greetings,
>>
>> I'm using MythDora 4.0 with two tuners (PVR-250 and 350).  Playback
>> is through the motherboard onboard Nvidia video and onboard audio.  I
>> am randomly(intermittently) losing audio when recording.  It seems to
>> be related to when both tuners are recording at the same time but I
>> have not been able deduce a specific set of conditions.
>>
>> Any help on what the problem is or how to debug it would be greatly
>> appreciated.
>>     
>
> Hi Rod,
>
> Please first upgrade to ivtv-0.10.5, that makes it easier for me to 
> debug.
>   
Version 0.10.3.  I hope that is OK.
> Then when you loose audio run 'v4l2-ctl --log-status -d /dev/videoX' for 
> the device in question and post the result.
>   
Status Log:

   ivtv1: =================  START STATUS CARD #1  =================
   tveeprom 3-0050: The eeprom says no radio is present, but the tuner type
   tveeprom 3-0050: indicates otherwise. I will assume that radio is 
present.
   tveeprom 3-0050: Hauppauge model 48132, rev K268, serial# 8207794
   tveeprom 3-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
   tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
   tveeprom 3-0050: audio processor is MSP4448 (idx 27)
   tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
   tveeprom 3-0050: has radio, has IR receiver, has no IR transmitter
   tda9887 3-0043: Data bytes: b=0x14 c=0x30 e=0x44
   tuner 3-0061: Tuner mode:      analog TV
   tuner 3-0061: Frequency:       83.25 MHz
   tuner 3-0061: Standard:        0x0000b000
   saa7115 3-0021: Audio frequency: 48000 Hz
   saa7115 3-0021: Input:           Composite 4
   saa7115 3-0021: Video signal:    broadcast/DVD
   saa7115 3-0021: Frequency:       60 Hz
   saa7115 3-0021: Detected format: NTSC
   saa7115 3-0021: Width, Height:   720, 480
   msp3400 3-0040: MSP4448G-A2 rev1 = 0x0117 rev2 = 0x3042
   msp3400 3-0040: Audio:    volume 58950
   msp3400 3-0040: Standard: 4.5  M BTSC-Stereo (stereo, dual)
   msp3400 3-0040: Audmode:  0x0001
   msp3400 3-0040: Routing:  0x00000000 (input) 0x00000044 (output)
   msp3400 3-0040: ACB:      0x0c00
   ivtv1: Video Input: Tuner 1
   ivtv1: Audio Input: Tuner 1
   ivtv1: Video Output: S-Video + Composite
   ivtv1: Audio Output: A/V Audio Out
   ivtv1: Output Mode: None
   ivtv1: Tuner: TV
   ivtv1: Stream: MPEG-2 Program Stream
   ivtv1: VBI Format: No VBI
   ivtv1: Video:  720x480, 30 fps
   ivtv1: Video:  MPEG-2, 4x3, Variable Bitrate, 4500000, Peak 6000000
   ivtv1: Video:  GOP Size 15, 2 B-Frames, GOP Closure, No 3:2 Pulldown
   ivtv1: Audio:  48 kHz, Layer II, 384 kbps, Stereo, No Emphasis, No CRC
   ivtv1: Spatial Filter:  Manual, Luma 1D Horizontal, Chroma 1D 
Horizontal, 0
   ivtv1: Temporal Filter: Manual, 8
   ivtv1: Median Filter:   Off, Luma [0, 255], Chroma [0, 255]
   ivtv1: Status flags: 0x00000040
   ivtv1: Stream encoder MPEG: status 0x0118, 1% of 4096 KiB (128 
buffers) in use
   ivtv1: Stream encoder YUV: status 0x0000, 0% of 2046 KiB (194 
buffers) in use
   ivtv1: Stream encoder VBI: status 0x0000, 0% of 1023 KiB (60 buffers) 
in use
   ivtv1: Stream encoder PCM audio: status 0x0000, 0% of 1021 KiB (227 
buffers) in use
   ivtv1: Stream decoder MPEG: status 0x0000, 0% of 1024 KiB (16 
buffers) in use
   ivtv1: Stream decoder VBI: status 0x0000, 0% of 1023 KiB (455 
buffers) in use
   ivtv1: Stream decoder YUV: status 0x0000, 0% of 1012 KiB (24 buffers) 
in use
   ivtv1: Read MPEG/VBI: 1184315328/0 bytes
   ivtv1: ==================  END STATUS CARD #1  ==================

This is the input for the PVR-350.  The sound comes back if the input is 
switched to the PVR-250.
For some reason when recording, the input is identified as 3 but there 
are only 2 inputs in the MythBox.

Under preferred input I have Input 0, PVR-250, and PVR-350

> Does the sound come back after switching to another channel? 
No
> After stopping and restarting the capture? 
No
> After rmmod/modprobe ivtv? 
Not sure how to do that,  I get a ERROR: Module ivtv is in use
> Or only after a full reboot?
>   
Yes, I can record with sound on the PVR-350 input after a reboot
> Thanks,
>
>       Hans
>
>   
Thank you.
Cheers,
Rod
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>   


_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to