On Friday 12 October 2007 17:09:38 Philip Dunning wrote:
> ----- Original Message -----
> From: "Hans Verkuil" <[EMAIL PROTECTED]>
> To: "User discussion about IVTV" <[email protected]>
> Sent: Friday, October 12, 2007 6:35 AM
> Subject: Re: [ivtv-users] No sound in Avermedia PVR150 Plus
>
> > On Friday 21 September 2007 23:52:11 Philip Dunning wrote:
> > > I have installed a Avermedia PVR150 Plus in Puppy Linux 2.14
> > > (M116?)
> > >
> > > Every thing works except sound in composite in and Svideo. I
> > > have sound from the tuner and can tune OK
> > >
> > > I saw this message
> > >
> > > http://www.gossamer-threads.com/lists/ivtv/devel/36205
> > >
> > > Which is basically the same problem in the same card.
>
> Instead of
>
> > > compiling the patched ivtv driver I just tried doing
> > > modprobe wm8739, in the off chance that would fix it.
> > >
> > > That showed the wm8739 loading in dmesg, but still no sound
> > >
> > > I have tried changing the volume, the audio inputs and
>
> outputs
>
> > > and mute on and off. still silence when playing in mplayer
>
> and
>
> > > playing a captured file too. Via the tuner works OK. I am in
>
> the
>
> > > us using NTSC.
> > >
> > > Here is the log
> >
> > Philip, can you post the log that you get when you load the
>
> driver
>
> > without any ivtv module options? I.e. without cardtype=16. I
>
> think I
>
> > need to add a new card definition for this one.
> >
> > Sorry about the late reply,
> >
> > Hans
> >
> > > ivtv: ==================== START INIT IVTV
>
> ====================
>
> > > ivtv: version 0.10.1 (tagged release) loading
> > > ivtv: Linux version: 2.6.18.1 mod_unload 486 gcc-3.4
> > > ivtv: In case of problems please include the debug info
>
> between
>
> > > ivtv: the START INIT IVTV and END INIT IVTV lines, along
>
> with
>
> > > ivtv: any module options, when mailing the ivtv-users
> > > mailinglist.
> > > ivtv0: User specified GotView PCI DVD2 Deluxe card (detected
> > > cx23416 based chip)
> > > PCI: setting IRQ 10 as level-triggered
> > > PCI: Found IRQ 10 for device 0000:00:0c.0
> > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> > > ivtv0: Encoder revision: 0x02060039
> > > tuner 5-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > > tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner)
> > > tuner 5-0060: All bytes are equal. It is not a TEA5767
> > > tuner 5-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > > wm8739 5-001a: chip found @ 0x34 (ivtv i2c driver #0)
> > > cx25840 5-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
> > > cx25840 5-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> > > ivtv0: Registered device video0 for encoder MPEG (4 MB)
> > > ivtv0: Registered device video32 for encoder YUV (2 MB)
> > > ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> > > ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> > > ivtv0: Registered device radio0 for encoder radio
> > > tuner 5-0060: type set to 38 (Philips PAL/SECAM multi
>
> (FM1216ME
>
> > > MK3))
> > > ivtv0: Initialized GotView PCI DVD2 Deluxe, card #0
> > > ivtv: ==================== END INIT IVTV
>
> ====================
>
> > > I have options cardtype=16 set
> > >
> > > Since I am using Puppy, compiling is not simple for me. Is
>
> there
>
> > > anything else I can try?
> > >
> > > Thanks
> > >
> > > Phil
>
> Sorry I suppose I should have posted a reply, but got this
> working a couple of days ago and since it was so long since the
> posting, I did not post that it was fixed. Sorry.
>
> I upgraded to a newer version of Linux (Puppy 2.17) and used the
> IVTV version in the link above.
>
> I now use cardtype=21 and it works. Tuner support is not
> provided in that card type. Presumably I can use cardtype=16 for
> tuner support and not line in and cardtype 21 for line in. I
> have not tried cardtype = 16 since I got cardtype 21 working as I
> do not want to break it.
>
> BTW without the cardtype it defaulted to Hauppauge PVR150. Are
> you still interested in that log?
Yes, since it would be nice to get proper card detection.
Regards,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
