On Friday 21 September 2007 23:52:11 Philip Dunning wrote:
> I have installed a Avermedia PVR150 Plus in Puppy Linux 2.14
> (M116?)
>
> Every thing works except sound in composite in and Svideo. I
> have sound from the tuner and can tune OK
>
> I saw this message
>
> http://www.gossamer-threads.com/lists/ivtv/devel/36205
>
> Which is basically the same problem in the same card. Instead of
> compiling the patched ivtv driver I just tried doing
> modprobe wm8739, in the off chance that would fix it.
>
> That showed the wm8739 loading in dmesg, but still no sound
>
> I have tried changing the volume, the audio inputs and outputs
> and mute on and off. still silence when playing in mplayer and
> playing a captured file too. Via the tuner works OK. I am in the
> us using NTSC.
>
> Here is the log
Philip, can you post the log that you get when you load the driver
without any ivtv module options? I.e. without cardtype=16. I think I
need to add a new card definition for this one.
Sorry about the late reply,
Hans
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.10.1 (tagged release) loading
> ivtv: Linux version: 2.6.18.1 mod_unload 486 gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users
> mailinglist.
> ivtv0: User specified GotView PCI DVD2 Deluxe card (detected
> cx23416 based chip)
> PCI: setting IRQ 10 as level-triggered
> PCI: Found IRQ 10 for device 0000:00:0c.0
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> ivtv0: Encoder revision: 0x02060039
> tuner 5-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 5-0060: All bytes are equal. It is not a TEA5767
> tuner 5-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> wm8739 5-001a: chip found @ 0x34 (ivtv i2c driver #0)
> cx25840 5-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 5-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> ivtv0: Registered device video0 for encoder MPEG (4 MB)
> ivtv0: Registered device video32 for encoder YUV (2 MB)
> ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> ivtv0: Registered device video24 for encoder PCM audio (1 MB)
> ivtv0: Registered device radio0 for encoder radio
> tuner 5-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME
> MK3))
> ivtv0: Initialized GotView PCI DVD2 Deluxe, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> I have options cardtype=16 set
>
> Since I am using Puppy, compiling is not simple for me. Is there
> anything else I can try?
>
> Thanks
>
> Phil
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
