----- Original Message ----- From: "Hans Verkuil" <[EMAIL PROTECTED]> To: "User discussion about IVTV" <[email protected]> Sent: Friday, October 12, 2007 6:35 AM Subject: Re: [ivtv-users] No sound in Avermedia PVR150 Plus
> On Friday 21 September 2007 23:52:11 Philip Dunning wrote: > > I have installed a Avermedia PVR150 Plus in Puppy Linux 2.14 > > (M116?) > > > > Every thing works except sound in composite in and Svideo. I > > have sound from the tuner and can tune OK > > > > I saw this message > > > > http://www.gossamer-threads.com/lists/ivtv/devel/36205 > > > > Which is basically the same problem in the same card. Instead of > > compiling the patched ivtv driver I just tried doing > > modprobe wm8739, in the off chance that would fix it. > > > > That showed the wm8739 loading in dmesg, but still no sound > > > > I have tried changing the volume, the audio inputs and outputs > > and mute on and off. still silence when playing in mplayer and > > playing a captured file too. Via the tuner works OK. I am in the > > us using NTSC. > > > > Here is the log > > Philip, can you post the log that you get when you load the driver > without any ivtv module options? I.e. without cardtype=16. I think I > need to add a new card definition for this one. > > Sorry about the late reply, > > Hans > > > ivtv: ==================== START INIT IVTV ==================== > > ivtv: version 0.10.1 (tagged release) loading > > ivtv: Linux version: 2.6.18.1 mod_unload 486 gcc-3.4 > > ivtv: In case of problems please include the debug info between > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > ivtv: any module options, when mailing the ivtv-users > > mailinglist. > > ivtv0: User specified GotView PCI DVD2 Deluxe card (detected > > cx23416 based chip) > > PCI: setting IRQ 10 as level-triggered > > PCI: Found IRQ 10 for device 0000:00:0c.0 > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > ivtv0: Encoder revision: 0x02060039 > > tuner 5-0043: chip found @ 0x86 (ivtv i2c driver #0) > > tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner) > > tuner 5-0060: All bytes are equal. It is not a TEA5767 > > tuner 5-0060: chip found @ 0xc0 (ivtv i2c driver #0) > > wm8739 5-001a: chip found @ 0x34 (ivtv i2c driver #0) > > cx25840 5-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) > > cx25840 5-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > ivtv0: Registered device video0 for encoder MPEG (4 MB) > > ivtv0: Registered device video32 for encoder YUV (2 MB) > > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > > ivtv0: Registered device radio0 for encoder radio > > tuner 5-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME > > MK3)) > > ivtv0: Initialized GotView PCI DVD2 Deluxe, card #0 > > ivtv: ==================== END INIT IVTV ==================== > > > > I have options cardtype=16 set > > > > Since I am using Puppy, compiling is not simple for me. Is there > > anything else I can try? > > > > Thanks > > > > Phil > > > > Sorry I suppose I should have posted a reply, but got this working a couple of days ago and since it was so long since the posting, I did not post that it was fixed. Sorry. I upgraded to a newer version of Linux (Puppy 2.17) and used the IVTV version in the link above. I now use cardtype=21 and it works. Tuner support is not provided in that card type. Presumably I can use cardtype=16 for tuner support and not line in and cardtype 21 for line in. I have not tried cardtype = 16 since I got cardtype 21 working as I do not want to break it. BTW without the cardtype it defaulted to Hauppauge PVR150. Are you still interested in that log? Thanks for the reply. Phil _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
