On Monday 29 October 2007 17:19, Brian J. Stults wrote:
> Fred Firestine wrote:
> > On 10/26/07, Brian J. Stults <[EMAIL PROTECTED]> wrote:
> >> I have had a PVR-150 for a couple years and I just added a PVR-500
> >> to the same system. The PVR-150 will not initialize when the
> >> PVR-500 is also installed. If I take the 500 out, the 150 works
> >> fine again. The 300 works regardless of whether the 150 is
> >> installed or not. I am using the latest firmware from
> >> ivtvdriver.org as of today. I've tried putting the two cards in
> >> all different combinations of PCI slots. The relevant output is
> >> below. Any suggestions? Thanks.
> >
> > Have you tried shutdown and power off, then restart? I have a
> > PVR-350 and PVR-150 and at one time I saw different behavior on a
> > simple reboot vs. a shutdown/restart.
>
> Yep, I've tried that. Shut down completely, wait a while, and
> restart. No difference. Any other suggestions? I can't think of
> anything else to try.
Could it be a powersupply issue? When the PVR500 is installed the PVR150
cannot find several i2c chips, something that can happen if there is
not enough power.
Regards,
Hans
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
