On di, 2007-11-13 at 18:28 +0100, Hans Verkuil wrote: > > So please help me out by downloading my ivtv-i2c tree here: > http://linuxtv.org/hg/~hverkuil/ivtv-i2c/archive/tip.tar.bz2
I pulled from you branch instead of downloading. > Whether it works or not, please post (or mail) the ivtv initialization > messages from the kernel log so that I know which devices are tested. All seems to work fine so far but if anything comes up during recording I'll let you know. Greets Sander Linux video capture interface: v2.00 ivtv: Start initialization, version 1.1.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 20 tveeprom 1-0050: The eeprom says no radio is present, but the tuner type tveeprom 1-0050: indicates otherwise. I will assume that radio is present. tveeprom 1-0050: Hauppauge model 26039, rev F0A5, serial# 8837856 tveeprom 1-0050: tuner model is TCL MPE05-2 (idx 105, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25842 (idx 36) tveeprom 1-0050: decoder processor is CX25842 (idx 29) tveeprom 1-0050: has radio, has IR receiver, has IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: Reopen i2c bus for IR-blaster support saa7146: register extension 'budget_ci dvb'. cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Registered device radio0 for encoder radio ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 ivtv: End initialization ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21 saa7146: found saa7146 @ mem ffffc20000032c00 (revision 1, irq 21) (0x13c2,0x1010). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget-C-CI PCI) adapter has MAC addr = 00:d0:5c:67:c3:3c input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:06.0/0000:04:06.0/input/input3 budget_ci: CI interface initialised DVB: registering frontend 0 (ST STV0297 DVB-C)... lirc_dev: IR Remote Control driver registered, major 61 lirc_i2c: chip 0x10020 found @ 0x71 (Hauppauge PVR150) lirc_dev: lirc_register_plugin: sample_rate: 10 ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
