Haven't tested with the system in front of me yet (I'm at work - uh - 
working ;-)  However, here's the uname & dmesg output:

(Linux grape 2.6.22.9-91.fc7 #1 SMP Thu Sep 27 20:47:39 EDT 2007 x86_64 
x86_64 x86_64 GNU/Linux)
==============================
Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, 
low) -> IRQ 19
skge 1.11 addr 0xf9000000 irq 19 chip Yukon-Lite rev 7
skge eth0: addr 00:0f:ea:55:85:a7
ivtv:  Start initialization, version 1.1.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, 
low) -> IRQ 16
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 2-0050: Hauppauge model 26582, rev E6B2, serial# 9785048
tveeprom 2-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has no radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-150
cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 2-0061: type set to 50 (TCL 2002N)
ivtv0: Registered device video0 for encoder MPG (16384 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [APC3] -> GSI 18 (level, 
low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI version 1.10
ivtv1: Initializing card #1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, 
low) -> IRQ 17
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 3-0050: Hauppauge model 26582, rev E6B2, serial# 9784737
tveeprom 3-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has no radio, has no IR receiver, has no IR transmitter
ivtv1: Autodetected Hauppauge WinTV PVR-150
cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, 
high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:06.0 to 64
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
tuner-simple 3-0061: type set to 50 (TCL 2002N)
ivtv1: Registered device video1 for encoder MPG (16384 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Initialized card #1: Hauppauge WinTV PVR-150
ivtv:  End initialization

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to