The new module package is for the new kernel package.  If you want to
use the updated module, you probably have to boot to the new kernel.
 

The FC6 kernel that I'm using (2.6.22.14-72.fc6) apparently already
comes with the ivtv.ko (the 1.0.x version, not the 0.10.x version) as
part of the kernel distribution:

# modinfo ivtv
filename:       
/lib/modules/2.6.22.14-72.fc6/kernel/drivers/media/video/ivtv/ivtv.ko
version:        1.0.0
license:        GPL
description:    CX23415/CX23416 driver
author:         Kevin Thayer, Chris Kennedy, Hans Verkuil
srcversion:     3C6EC3E20E5E5AD1E275F1E
alias:          pci:v00004444d00000016sv*sd*bc*sc*i*
alias:          pci:v00004444d00000803sv*sd*bc*sc*i*
depends:
cx2341x,videodev,tveeprom,v4l2-common,i2c-core,v4l1-compat,i2c-algo-bit
vermagic:       2.6.22.14-72.fc6 SMP mod_unload 586 4KSTACKS 

-Andy

On Wed, 2008-01-09 at 00:53 -0500, Michelle Dupuis wrote:
> Well, I temporarily install the dependant kernel and ivtv upgraded
> successfully.  However, unless I boot this new kernel, it appears that the
> ivtv module being loaded is still the old one.  Is there a way around this?
> (Or do I now have to do a kernel upgrade?)
> 
> MD
> 
> > -----Original Message-----
> > From: G. Andrew Walls [mailto:[EMAIL PROTECTED] 
> > Sent: Tuesday, January 08, 2008 10:05 PM
> > To: [email protected]
> > Cc: Michelle Dupuis
> > Subject: [ivtv-users] Only static using ivtv-radio on PVR-500mce
> > 
> > 
> > 
> > 
> > 
> > > I've got a pvr-500mce running fine under Fedora 6 
> > (2.6.20-1.2948.fc6).  
> > > I can tune TV channels just fine, but not radio - I only get static.
> > >
> > > If I scan I find some channels (see below) which I doubt 
> > are real, and 
> > > when I tune them I only hear static (see tune result).
> > >
> > 
> > When I had a similar problem with my PVR-150MCE, it was that 
> > the preselector filters and switching were being set up wrong 
> > in the tuner.
> > 
> > The tuner.ko module had a bad/incorrect definition for my 
> > tuner.  I wound up propsing some changes to Hans that he 
> > refined into a decent fix.
> > 
> > An easy option with which to experiment would be to force a 
> > different, but very similar tuner type, on ivtv module load.  
> > This wiki page has my particular example:
> > 
> > http://www.ivtvdriver.org/index.php/Howto:Radio_tuner
> > 
> > You probably have to do some trial and error, and I don't 
> > know how to specify the type of the second tuner on a two tuner card.
> > 
> > > I have grabbed the latest Hauppauge firmware and installed 
> > it, but it 
> > > didn't help.  My version of ivtv is 0.10.3 release 129.fc6 (and I 
> > > can't upgrade it because of a stupid YUM invalid depenency 
> > - see below).
> > >
> > > Any ideas?
> > 
> > I find it interesting that the second tuner found on your 
> > card has the FM tuning capability.  IIRC the ivtv driver code 
> > "knows" that only the first tuner on a PVR-500 has FM tuning 
> > capability.  Hmmm...
> > 
> > 
> > 
> > As for the yum problem, have yum install the kernel to resolve the
> > dependency: 2.6.22.9-61.fc6. You can't upgrade kernels, only 
> > install and delete them (installonly plugin).  Once you do 
> > that, you should be able to install the kmdl package.
> > 
> > 
> > -Andy
> > 
> > > MD
> > >
> > >
> > > -------------------
> > > My ivtv version:
> > >
> > > Installed Packages
> > > Name   : ivtv
> > > Arch   : i386
> > > Epoch  : 1
> > > Version: 0.10.3
> > > Release: 129.fc6
> > > Size   : 439 k
> > > Repo   : installed
> > > Summary: An iTVC15/16 and CX23415/16 driver
> > >
> > > -------------------------
> > > Result of scan:
> > > [root at theatre ~]ivtv-radio -s
> > > STATION: 87.1 FM
> > > STATION: 87.7 FM
> > > STATION: 88.5 FM
> > > STATION: 88.7 FM
> > > STATION: 88.9 FM
> > > STATION: 89.2 FM
> > > STATION: 94.3 FM
> > > STATION: 100.3 FM
> > >
> > > -------------------------
> > > Result of tune:
> > > [root at theatre ~]ivtv-radio -f 100.3 set to freq 100.30
> > > Running: aplay -f dat < /dev/video24
> > > Playing raw data 'stdin' : Signed 16 bit Little Endian, 
> > Rate 48000 Hz, 
> > > Stereo Aborted by signal Interrupt...
> > > Cleaning up
> > >
> > > -------------------------
> > > My message portion:
> > >
> > >
> > > Jan  8 19:15:25 theatre kernel: ivtv:  ==================== 
> > START INIT 
> > > IVTV ==================== Jan  8 19:15:25 theatre kernel: ivtv:  
> > > version 0.10.2 (tagged release) loading Jan  8 19:15:25 theatre 
> > > kernel: ivtv:  Linux version: 2.6.20-1.2948.fc6.ocg SMP mod_unload 
> > > PENTIUM4 4KSTACKS Jan  8 19:15:25 theatre kernel: ivtv:  In case of 
> > > problems please include the debug info between Jan  8 
> > 19:15:25 theatre 
> > > kernel: ivtv:  the START INIT IVTV and END INIT IVTV lines, 
> > along with 
> > > Jan  8 19:15:25 theatre kernel: ivtv:  any module options, when 
> > > mailing the ivtv-users mailinglist.
> > > Jan  8 19:15:25 theatre kernel: DVB: registering new adapter 
> > > (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
> > > Jan  8 19:15:25 theatre kernel: adapter has MAC addr = 
> > > 00:d0:5c:24:b0:55 Jan  8 19:15:25 theatre kernel: dvb-ttpci: info @ 
> > > card 0: firm f0240009, rtsl b0250018, vid 71010068, app 
> > 80f22623 Jan  
> > > 8 19:15:25 theatre kernel: dvb-ttpci: firmware @ card 0 supports CI 
> > > link layer interface Jan  8 19:15:25 theatre kernel: dvb-ttpci: 
> > > Crystal audio DAC @ card 0 detected Jan  8 19:15:25 theatre kernel: 
> > > saa7146_vv: saa7146 (0): registered device video0 [v4l2] Jan  8 
> > > 19:15:25 theatre kernel: saa7146_vv: saa7146 (0): registered device 
> > > vbi0 [v4l2] Jan  8 19:15:25 theatre kernel: DVB: 
> > registering frontend 
> > > 0 (ST STV0299 DVB-S)...
> > > Jan  8 19:15:25 theatre kernel: input: DVB on-card IR receiver as
> > > /class/input/input7
> > > Jan  8 19:15:25 theatre kernel: dvb-ttpci: found av7110-0.
> > > Jan  8 19:15:25 theatre kernel: ivtv0: Autodetected Hauppauge card 
> > > (cx23416
> > > based)
> > > Jan  8 19:15:25 theatre kernel: ACPI: PCI Interrupt 
> > 0000:02:08.0[A] -> 
> > > GSI
> > > 21 (level, low) -> IRQ 23
> > > Jan  8 19:15:25 theatre kernel: ivtv0: loaded v4l-cx2341x-enc.fw 
> > > firmware
> > > (376836 bytes)
> > > Jan  8 19:15:25 theatre kernel: ivtv0: Encoder revision: 0x02060039 
> > > Jan  8 19:15:25 theatre kernel: tveeprom 2-0050: Hauppauge model 
> > > 23552, rev E492, serial# 9308741 Jan  8 19:15:25 theatre kernel: 
> > > tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 
> > 92, type 57) 
> > > Jan  8 19:15:25 theatre kernel: tveeprom 2-0050: TV 
> > standards NTSC(M) 
> > > (eeprom 0x08) Jan  8 19:15:25 theatre kernel: tveeprom 
> > 2-0050: second 
> > > tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) Jan  8 
> > > 19:15:25 theatre kernel: tveeprom 2-0050: audio processor 
> > is CX25843 
> > > (idx 37) Jan  8 19:15:25 theatre kernel: tveeprom 2-0050: decoder 
> > > processor is
> > > CX25843 (idx 30)
> > > Jan  8 19:15:25 theatre kernel: tveeprom 2-0050: has radio, 
> > has no IR 
> > > receiver, has no IR transmitter Jan  8 19:15:25 theatre 
> > kernel: ivtv0: 
> > > Autodetected WinTV PVR 500 (unit #1) Jan  8 19:15:25 
> > theatre kernel: 
> > > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) Jan  8 
> > 19:15:25 
> > > theatre kernel: tda9887 2-0043: tda988[5/6/7] found @ 0x43
> > > (tuner)
> > > Jan  8 19:15:25 theatre kernel: tuner 2-0060: TEA5767 detected.
> > > Jan  8 19:15:25 theatre kernel: tuner 2-0060: chip found @ 
> > 0xc0 (ivtv 
> > > i2c driver #0) Jan  8 19:15:25 theatre kernel: tuner 
> > 2-0060: type set 
> > > to 62 (Philips TEA5767HN FM Radio) Jan  8 19:15:25 theatre kernel: 
> > > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) Jan  8 
> > 19:15:25 
> > > theatre kernel: cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c 
> > > driver #0) Jan  8 19:15:25 theatre kernel: cx25840 2-0044: loaded 
> > > v4l-cx25840.fw firmware (16382 bytes) Jan  8 19:15:25 
> > theatre kernel: 
> > > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) Jan  
> > 8 19:15:25 
> > > theatre kernel: ivtv0: Registered device video1 for encoder MPEG (4 
> > > MB) Jan  8 19:15:25 theatre kernel: ivtv0: Registered 
> > device video32 
> > > for encoder YUV (2 MB) Jan  8 19:15:25 theatre kernel: ivtv0: 
> > > Registered device vbi1 for encoder VBI (1 MB) Jan  8 
> > 19:15:25 theatre 
> > > kernel: ivtv0: Registered device video24 for encoder PCM 
> > audio (1 MB) 
> > > Jan  8 19:15:25 theatre kernel: ivtv0: Registered device radio0 for 
> > > encoder radio Jan  8 19:15:25 theatre kernel: tuner 2-0061: 
> > type set 
> > > to 57 (Philips FQ1236A MK4) Jan  8 19:15:25 theatre kernel: ivtv0: 
> > > Initialized WinTV PVR 500 (unit #1), card #0 Jan  8 
> > 19:15:25 theatre 
> > > kernel: ivtv:  ======================  NEXT CARD 
> > > ====================== Jan  8 19:15:25 theatre kernel: ivtv1: 
> > > Autodetected Hauppauge card (cx23416
> > > based)
> > > Jan  8 19:15:25 theatre kernel: ACPI: PCI Interrupt 
> > 0000:02:09.0[A] -> 
> > > GSI
> > > 22 (level, low) -> IRQ 19
> > > Jan  8 19:15:25 theatre kernel: ivtv1: loaded v4l-cx2341x-enc.fw 
> > > firmware
> > > (376836 bytes)
> > > Jan  8 19:15:25 theatre kernel: ivtv1: Encoder revision: 0x02060039 
> > > Jan  8 19:15:25 theatre kernel: tuner 3-0043: chip found @ 
> > 0x86 (ivtv 
> > > i2c driver #1) Jan  8 19:15:25 theatre kernel: tda9887 3-0043: 
> > > tda988[5/6/7] found @ 0x43
> > > (tuner)
> > > Jan  8 19:15:25 theatre kernel: tuner 3-0061: chip found @ 
> > 0xc2 (ivtv 
> > > i2c driver #1) Jan  8 19:15:25 theatre kernel: cx25840 3-0044: 
> > > cx25843-23 found @ 0x88 (ivtv i2c driver #1) Jan  8 
> > 19:15:25 theatre 
> > > kernel: cx25840 3-0044: loaded v4l-cx25840.fw firmware 
> > (16382 bytes) 
> > > Jan  8 19:15:25 theatre kernel: wm8775 3-001b: chip found @ 
> > 0x36 (ivtv 
> > > i2c driver #1) Jan  8 19:15:25 theatre kernel: tveeprom 3-0050: 
> > > Hauppauge model 23552, rev E492, serial# 9308741 Jan  8 19:15:25 
> > > theatre kernel: tveeprom 3-0050: tuner model is Philips FQ1236A MK4 
> > > (idx 92, type 57) Jan  8 19:15:25 theatre kernel: tveeprom 
> > 3-0050: TV 
> > > standards NTSC(M) (eeprom 0x08) Jan  8 19:15:25 theatre kernel: 
> > > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM 
> > Radio (idx 
> > > 101, type 62) Jan  8 19:15:25 theatre kernel: tveeprom 
> > 3-0050: audio 
> > > processor is CX25843 (idx 37) Jan  8 19:15:25 theatre 
> > kernel: tveeprom 
> > > 3-0050: decoder processor is
> > > CX25843 (idx 30)
> > > Jan  8 19:15:25 theatre kernel: tveeprom 3-0050: has radio, 
> > has no IR 
> > > receiver, has no IR transmitter Jan  8 19:15:25 theatre 
> > kernel: ivtv1: 
> > > Correcting tveeprom data: no radio present on second unit Jan  8 
> > > 19:15:25 theatre kernel: ivtv1: Autodetected WinTV PVR 500 
> > (unit #2) 
> > > Jan  8 19:15:25 theatre kernel: ivtv1: Registered device video2 for 
> > > encoder MPEG (4 MB) Jan  8 19:15:25 theatre kernel: ivtv1: 
> > Registered 
> > > device video33 for encoder YUV (2 MB) Jan  8 19:15:25 
> > theatre kernel: 
> > > ivtv1: Registered device vbi2 for encoder VBI (1 MB) Jan  8 
> > 19:15:25 
> > > theatre kernel: ivtv1: Registered device video25 for 
> > encoder PCM audio 
> > > (1 MB) Jan  8 19:15:25 theatre kernel: tuner 3-0061: type set to 57 
> > > (Philips FQ1236A MK4) Jan  8 19:15:25 theatre kernel: ivtv1: 
> > > Initialized WinTV PVR 500 (unit #2), card #1 Jan  8 
> > 19:15:25 theatre 
> > > kernel: ivtv:  ====================  END INIT IVTV 
> > > ====================
> > >
> > > --------------------------------------
> > >
> > > [root at theatre ~]yum upgrade ivtv
> > > Loading "kmdl" plugin
> > > Loading "installonlyn" plugin
> > > Setting up Upgrade Process
> > > Setting up repositories
> > > Reading repository metadata in from local files Excluding 
> > Packages in 
> > > global exclude list Finished Resolving Dependencies
> > > --> Populating transaction set with selected packages. Please wait.
> > > ---> Package ivtv.i386 1:1.0.3-135.fc6 set to be updated
> > > --> Running transaction check
> > > --> Processing Dependency: 
> > /lib/modules/v4l-cx2341x-init.mpg for package:
> > > ivtv-kmdl-2.6.20-1.2948.fc6
> > > Importing additional filelist information
> > > --> Processing Dependency: ivtv-kmdl-1:1.0.3-135.fc6 for 
> > package: ivtv 
> > > --> Processing Dependency: 
> > /lib/modules/v4l-cx2341x-init.mpg for package:
> > > ivtv-kmdl-2.6.20-1.2944.fc6
> > > --> Restarting Dependency Resolution with new changes.
> > > --> Populating transaction set with selected packages. Please wait.
> > > ---> Package ivtv-firmware.noarch 2:20070217-15 set to be updated 
> > > ---> Package ivtv-kmdl-2.6.22.9-61.fc6.i686 1:1.0.3-135.fc6 
> > set to be
> > > updated
> > > --> Running transaction check
> > > --> Processing Dependency: /boot/vmlinuz-2.6.22.9-61.fc6 
> > for package:
> > > ivtv-kmdl-2.6.22.9-61.fc6
> > > --> Finished Dependency Resolution
> > > Error: Missing Dependency: /boot/vmlinuz-2.6.22.9-61.fc6 is 
> > needed by 
> > > package ivtv-kmdl-2.6.22.9-61.fc6 [root at theatre ~]uname -a Linux 
> > > theatre.ocg.ca 2.6.20-1.2948.fc6 #2 SMP Sun May 27 23:45:22 EDT 2007
> > > i686 i686 i386 GNU/Linux
> > >
> 

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to