On di, 2008-03-04 at 20:10 -0500, Rick Steeves wrote: > CentOS 5, kernel 2.6.18-53.1.4.el5 running MythTV 0.20.2 and ivtv > 0.10.6, PVR 350 > > Trying to start watching something using TVOut that was previously > recorded. I got the following message in /var/log/messages
Do you use the Xdriver or MythTV's pvr-350 tv-out feature? > Mar 4 19:38:41 glutton kernel: ivtv0: Stereo mode changed > Mar 4 19:42:10 glutton kernel: i2c_adapter i2c-2: sendbytes: error - > bailout. > Mar 4 19:42:10 glutton kernel: i2c_adapter i2c-2: sendbytes: error - > bailout. Do you also see errors from the msp chip? For example, msp3400 2-0040: I/O error #0 (read 0x10/0x200) Does "dd if=/dev/video0 of=/dev/video16 bs=64k" work? The PVR-350 can get very hot so could it be overheating? The below looks fine to me. Greets Sander > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.10.6 (tagged release) loading > ivtv: Linux version: 2.6.18-53.1.4.el5 SMP mod_unload gcc-4.1 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 > ivtv0: Autodetected Hauppauge card (cx23415 based) > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > GSI 20 sharing vector 0xC9 and IRQ 20 > ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, > low) -> IRQ > 201 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02060039 > ivtv0: Decoder revision: 0x02020023 > tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9956444 > tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP4448 (idx 27) > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > tveeprom 0-0050: has radio, has IR remote > ivtv0: Autodetected Hauppauge WinTV PVR-350 > tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) > msp3400 0-0040: MSP4448G-A2 supports radio, mode is autodetect and > autoselect > ivtv0: Registered device video0 for encoder MPEG (16 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Registered device video16 for decoder MPEG (4 MB) > ivtv0: Registered device vbi8 for decoder VBI (1 MB) > ivtv0: Registered device vbi16 for decoder VOUT > ivtv0: Registered device video48 for decoder YUV (1 MB) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== > EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV > 0000:00:18.2 > ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 > ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, > low) -> IRQ > 177 > PCI: Setting latency timer of device 0000:00:10.1 to 64 > ivtv0-fb: Framebuffer at 0xf1510000, mapped to 0xffffc20011210000, > size 1665k > ivtv0-fb: === Validated display mode === > ivtv0-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > bttv: driver version 0.9.16 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > ivtv0-fb: === Display mode change === > ivtv0-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > ivtv0-fb: Display position 1,1 > ivtv0-fb: Display filter : on > ivtv0-fb: Color space : RGB > ivtv0-fb: Running in compatibility mode. Display resize & mode change > disabled > ivtv0-fb: Framebuffer registered on ivtv card id 0 > i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00 > i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4c40 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
