On za, 2008-03-08 at 22:46 -0500, [EMAIL PROTECTED] wrote: > At 04:03 PM 3/5/2008, Sander Sweers wrote: > >On di, 2008-03-04 at 20:10 -0500, Rick Steeves wrote: > > > CentOS 5, kernel 2.6.18-53.1.4.el5 running MythTV 0.20.2 and ivtv > > > 0.10.6, PVR 350 > > > > > > Trying to start watching something using TVOut that was previously > > > recorded. I got the following message in /var/log/messages > > > >Do you use the Xdriver or MythTV's pvr-350 tv-out feature? > > The mythtv pvr-350-out feature.
Is it possible to try the Xdriver with X? The tv-out feature can be a real pain to get working. > >Does "dd if=/dev/video0 of=/dev/video16 bs=64k" work? > > Seems to give me audio but no video. > > Are you presuming my PVR 350 is on /dev/video0? Because it's on /dev/video4 > > If I try > dd if=/dev/video4 of=/dev/video16 bs=64k > > then no, it doesn't work. Why is it on video4 when the IVTV init shows it on video0? If it is on video4 then you should try the below. dd if=/dev/video4 of=/dev/video20 bs=64k > >The below looks fine to me. Not anymore now if you have the pvr-350 on video4. Please check this and post a new init. Greets Sander > > > ivtv: ==================== START INIT IVTV ==================== > > > ivtv: version 0.10.6 (tagged release) loading > > > ivtv: Linux version: 2.6.18-53.1.4.el5 SMP mod_unload gcc-4.1 > > > ivtv: In case of problems please include the debug info between > > > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > > > ivtv: any module options, when mailing the ivtv-users mailinglist. > > > eth0: forcedeth.c: subsystem: 01043:816a bound to 0000:00:14.0 > > > ivtv0: Autodetected Hauppauge card (cx23415 based) > > > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > > > GSI 20 sharing vector 0xC9 and IRQ 20 > > > ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, > > > low) -> IRQ > > > 201 > > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > > > ivtv0: Encoder revision: 0x02060039 > > > ivtv0: Decoder revision: 0x02020023 > > > tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9956444 > > > tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > > > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > > > tveeprom 0-0050: audio processor is MSP4448 (idx 27) > > > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > > > tveeprom 0-0050: has radio, has IR remote > > > ivtv0: Autodetected Hauppauge WinTV PVR-350 > > > tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) > > > tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) > > > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > > saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) > > > saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > > > msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) > > > msp3400 0-0040: MSP4448G-A2 supports radio, mode is autodetect and > > > autoselect > > > ivtv0: Registered device video0 for encoder MPEG (16 MB) > > > ivtv0: Registered device video32 for encoder YUV (2 MB) > > > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > > > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > > > ivtv0: Registered device radio0 for encoder radio > > > ivtv0: Registered device video16 for decoder MPEG (4 MB) > > > ivtv0: Registered device vbi8 for decoder VBI (1 MB) > > > ivtv0: Registered device vbi16 for decoder VOUT > > > ivtv0: Registered device video48 for decoder YUV (1 MB) > > > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > > > tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) > > > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > > > ivtv: ==================== END INIT IVTV ==================== > > > EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV > > > 0000:00:18.2 > > > ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 > > > ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, > > > low) -> IRQ > > > 177 > > > PCI: Setting latency timer of device 0000:00:10.1 to 64 > > > ivtv0-fb: Framebuffer at 0xf1510000, mapped to 0xffffc20011210000, > > > size 1665k > > > ivtv0-fb: === Validated display mode === > > > ivtv0-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > ivtv0-fb: Display position 1,1 > > > ivtv0-fb: Display filter : on > > > ivtv0-fb: Color space : RGB > > > bttv: driver version 0.9.16 loaded > > > bttv: using 8 buffers with 2080k (520 pages) each for capture > > > ivtv0-fb: === Display mode change === > > > ivtv0-fb: Display size 720x480 (720x480 Virtual) @ 32bpp > > > ivtv0-fb: Display position 1,1 > > > ivtv0-fb: Display filter : on > > > ivtv0-fb: Color space : RGB > > > ivtv0-fb: Running in compatibility mode. Display resize & mode change > > > disabled > > > ivtv0-fb: Framebuffer registered on ivtv card id 0 > > > i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00 > > > i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4c40 > > > > > >_______________________________________________ > >ivtv-users mailing list > >[email protected] > >http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > > Rick Steeves > [EMAIL PROTECTED] http://www.sinister.net > > A bicycle sails aim-irelandbybicycle > On an ocean of freedom yahoo-ricksteeves > I am the captain [EMAIL PROTECTED] > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
