Hi.
I have been struggeling with setting the correct output parameters for
my tv-output. The listarchive isn't quite usefull here, since almost
every post is regarding an older kernel/ivtv-driver and therefore has a
lot more options available.
When booting, I get output, black screen with diagonally lines. The
test-pattern is showing in b/w if I do modprobe saa7127 test_image=1. I
assume this is related to setting the correct output-format, since pal
normally runs on 50Hz, the 60Hz selected by saa7127 seems to be wrong.
Is there any way to switch to pal, or do I have to buy a new
graphic-card with a tv-out?
Below, output from modinfo, v4l2-ctl and dmesg.
My system:
OpenSUSE 10.3 - kernel 2.6.22.17-0.1-default
modinfo saa7127
filename:
/lib/modules/2.6.22.17-0.1-default/kernel/drivers/media/video/saa7127.ko
license: GPL
author: Kevin Thayer, Chris Kennedy, Hans Verkuil
description: Philips SAA7127/9 video encoder driver
srcversion: 0FD095D325BC0505E461724
depends: i2c-core,v4l2-common
supported: yes
vermagic: 2.6.22.17-0.1-default SMP mod_unload 586
parm: debug:debug level (0-2) (int)
parm: test_image:test_image (0-1) (int)
parm: force:List of adapter,address pairs to boldly assume to
be present (array of short)
parm: probe:List of adapter,address pairs to scan additionally
(array of short)
parm: ignore:List of adapter,address pairs not to scan (array
of short)
v4l2-ctl --all
Driver Info:
Driver name : ivtv
Card type : Hauppauge WinTV PVR-350
Bus info : 0000:01:09.0
Driver version: 2563
Capabilities : 0x010700F3
Video Capture
Video Output
VBI Capture
VBI Output
Sliced VBI Capture
Sliced VBI Output
Tuner
Audio
Radio
Read/Write
Format Video Capture:
Width/Height : 720/576
Pixel Format : MPEG
Field : Interlaced
Bytes per Line: 0
Size Image : 131072
Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format Video Output:
Width/Height : 720/576
Pixel Format : MPEG
Field : Interlaced
Bytes per Line: 0
Size Image : 131072
Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format Sliced VBI Capture:
Service Set :
Service Line 0: /
Service Line 1: /
Service Line 2: /
Service Line 3: /
Service Line 4: /
Service Line 5: /
Service Line 6: /
Service Line 7: /
Service Line 8: /
Service Line 9: /
Service Line 10: /
Service Line 11: /
Service Line 12: /
Service Line 13: /
Service Line 14: /
Service Line 15: /
Service Line 16: /
Service Line 17: /
Service Line 18: /
Service Line 19: /
Service Line 20: /
Service Line 21: /
Service Line 22: /
Service Line 23: /
I/O Size : 0
Format Sliced VBI Output:
Service Set : vps wss
Service Line 0: /
Service Line 1: /
Service Line 2: /
Service Line 3: /
Service Line 4: /
Service Line 5: /
Service Line 6: /
Service Line 7: /
Service Line 8: /
Service Line 9: /
Service Line 10: /
Service Line 11: /
Service Line 12: /
Service Line 13: /
Service Line 14: /
Service Line 15: /
Service Line 16: vps /
Service Line 17: /
Service Line 18: /
Service Line 19: /
Service Line 20: /
Service Line 21: /
Service Line 22: /
Service Line 23: wss /
I/O Size : 2304
Format VBI Capture:
Sampling Rate : 27000000 Hz
Offset : 248 samples (9.18519e-06 secs after leading edge)
Samples per Line: 1439
Sample Format : GREY
Start 1st Field : 6
Count 1st Field : 18
Start 2nd Field : 318
Count 2nd Field : 18
Framebuffer Format:
Capability :
Flags :
Width : 0
Height : 0
Pixel Format :
Bytes per Line: 0
Size image : 0
Colorspace : Unknown (00000000)
Video input : 0 (Tuner 1)
Video output: 0 (S-Video + Composite)
Audio input : 0 (Tuner 1)
Audio output: 0 (A/V Audio Out)
Frequency: 9716 (607.250000 MHz)
Video Standard = 0x0000000f
PAL-B/B1/G/H
Tuner:
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength : 99%
Current audio mode : stereo
Available subchannels: stereo
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.3 (tagged release) loading
ivtv: Linux version: 2.6.22.17-0.1-default SMP mod_unload 586
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ALSA sound/pci/ac97/ac97_codec.c:2113: AC'97 0 analog subsections not ready
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 18 (level, low) -> IRQ 16
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
ivtv i2c driver #0: Test OK
saa7127 1-0044: detecting saa7127 client on address 0x88
saa7127 1-0044: Configuring encoder
saa7127 1-0044: Selecting 60 Hz video Standard
saa7127 1-0044: Selecting S-Video + Composite output type
saa7127 1-0044: Selecting Normal Encoder Input
saa7127 1-0044: Enable Video Output
saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
tveeprom 1-0050: Hauppauge model 48134, rev J342, serial# 6563634
tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect
and autoselect
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 19 (level, low) -> IRQ 18
ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
ivtv i2c driver #1: Test OK
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #1)
msp3400 2-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #1)
msp3400 2-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect
and autoselect
tveeprom 2-0050: Hauppauge model 32054, rev B148, serial# 2758742
tveeprom 2-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
ivtv1: Autodetected Hauppauge WinTV PVR-250
ivtv1: Registered device video1 for encoder MPEG (4 MB)
ivtv1: Registered device video33 for encoder YUV (2 MB)
ivtv1: Registered device vbi1 for encoder VBI (1 MB)
ivtv1: Registered device video25 for encoder PCM audio (1 MB)
tuner 2-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
ivtv1: Initialized Hauppauge WinTV PVR-250, card #1
ivtv: ==================== END INIT IVTV ====================
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
