Hans Verkuil skreiv: > On Monday 07 April 2008 14:32:57 Bjørn Ove Johnsen wrote: > >> Hi. >> >> I have been struggeling with setting the correct output parameters >> for my tv-output. The listarchive isn't quite usefull here, since >> almost every post is regarding an older kernel/ivtv-driver and >> therefore has a lot more options available. >> >> When booting, I get output, black screen with diagonally lines. The >> test-pattern is showing in b/w if I do modprobe saa7127 test_image=1. >> I assume this is related to setting the correct output-format, since >> pal normally runs on 50Hz, the 60Hz selected by saa7127 seems to be >> wrong. >> > > I believe that when you use the test_image=1 option you always get 60 > Hz. But without it the output is set to the standard of the tuner by > default, which is 50Hz in your case. > > You can verify this with: > > v4l2-ctl --log-status > > There should be a line like this: > > saa7127 3-0044: Standard: 50 Hz > > You can force it with 'v4l2-ctl -s ntsc' or 'v4l2-ctl -s pal'. > > Regards, > > Hans > >
This don't seems to work for me, I get the line "saa7127 1-0044: Standard: 60 Hz" The output is still crap. I am, and has always been, able to do manually recording by doing 'cat /dev/video0 > somefile.mpg' Is there anything I can do, besides the step to go back to the unmaintained suse 9.3 (last known installation)? Bjørn Ove >> Is there any way to switch to pal, or do I have to buy a new >> graphic-card with a tv-out? >> >> Below, output from modinfo, v4l2-ctl and dmesg. >> >> >> >> My system: >> OpenSUSE 10.3 - kernel 2.6.22.17-0.1-default >> >> modinfo saa7127 >> filename: >> /lib/modules/2.6.22.17-0.1-default/kernel/drivers/media/video/saa7127 >> .ko license: GPL >> author: Kevin Thayer, Chris Kennedy, Hans Verkuil >> description: Philips SAA7127/9 video encoder driver >> srcversion: 0FD095D325BC0505E461724 >> depends: i2c-core,v4l2-common >> supported: yes >> vermagic: 2.6.22.17-0.1-default SMP mod_unload 586 >> parm: debug:debug level (0-2) (int) >> parm: test_image:test_image (0-1) (int) >> parm: force:List of adapter,address pairs to boldly assume >> to be present (array of short) >> parm: probe:List of adapter,address pairs to scan >> additionally (array of short) >> parm: ignore:List of adapter,address pairs not to scan >> (array of short) >> >> >> v4l2-ctl --all >> Driver Info: >> Driver name : ivtv >> Card type : Hauppauge WinTV PVR-350 >> Bus info : 0000:01:09.0 >> Driver version: 2563 >> Capabilities : 0x010700F3 >> Video Capture >> Video Output >> VBI Capture >> VBI Output >> Sliced VBI Capture >> Sliced VBI Output >> Tuner >> Audio >> Radio >> Read/Write >> Format Video Capture: >> Width/Height : 720/576 >> Pixel Format : MPEG >> Field : Interlaced >> Bytes per Line: 0 >> Size Image : 131072 >> Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601) >> Format Video Output: >> Width/Height : 720/576 >> Pixel Format : MPEG >> Field : Interlaced >> Bytes per Line: 0 >> Size Image : 131072 >> Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601) >> Format Sliced VBI Capture: >> Service Set : >> Service Line 0: / >> Service Line 1: / >> Service Line 2: / >> Service Line 3: / >> Service Line 4: / >> Service Line 5: / >> Service Line 6: / >> Service Line 7: / >> Service Line 8: / >> Service Line 9: / >> Service Line 10: / >> Service Line 11: / >> Service Line 12: / >> Service Line 13: / >> Service Line 14: / >> Service Line 15: / >> Service Line 16: / >> Service Line 17: / >> Service Line 18: / >> Service Line 19: / >> Service Line 20: / >> Service Line 21: / >> Service Line 22: / >> Service Line 23: / >> I/O Size : 0 >> Format Sliced VBI Output: >> Service Set : vps wss >> Service Line 0: / >> Service Line 1: / >> Service Line 2: / >> Service Line 3: / >> Service Line 4: / >> Service Line 5: / >> Service Line 6: / >> Service Line 7: / >> Service Line 8: / >> Service Line 9: / >> Service Line 10: / >> Service Line 11: / >> Service Line 12: / >> Service Line 13: / >> Service Line 14: / >> Service Line 15: / >> Service Line 16: vps / >> Service Line 17: / >> Service Line 18: / >> Service Line 19: / >> Service Line 20: / >> Service Line 21: / >> Service Line 22: / >> Service Line 23: wss / >> I/O Size : 2304 >> Format VBI Capture: >> Sampling Rate : 27000000 Hz >> Offset : 248 samples (9.18519e-06 secs after >> leading edge) Samples per Line: 1439 >> Sample Format : GREY >> Start 1st Field : 6 >> Count 1st Field : 18 >> Start 2nd Field : 318 >> Count 2nd Field : 18 >> Framebuffer Format: >> Capability : >> Flags : >> Width : 0 >> Height : 0 >> Pixel Format : >> Bytes per Line: 0 >> Size image : 0 >> Colorspace : Unknown (00000000) >> Video input : 0 (Tuner 1) >> Video output: 0 (S-Video + Composite) >> Audio input : 0 (Tuner 1) >> Audio output: 0 (A/V Audio Out) >> Frequency: 9716 (607.250000 MHz) >> Video Standard = 0x0000000f >> PAL-B/B1/G/H >> Tuner: >> Capabilities : 62.5 kHz multi-standard stereo lang1 >> lang2 Frequency range : 44.0 MHz - 958.0 MHz >> Signal strength : 99% >> Current audio mode : stereo >> Available subchannels: stereo >> >> >> >> ivtv: ==================== START INIT IVTV ==================== >> ivtv: version 0.10.3 (tagged release) loading >> ivtv: Linux version: 2.6.22.17-0.1-default SMP mod_unload 586 >> ivtv: In case of problems please include the debug info between >> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >> ivtv: any module options, when mailing the ivtv-users mailinglist. >> ALSA sound/pci/ac97/ac97_codec.c:2113: AC'97 0 analog subsections not >> ready ivtv0: Autodetected Hauppauge card (cx23415 based) >> ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 18 (level, low) -> IRQ 16 >> ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) >> ivtv0: Encoder revision: 0x02060039 >> ivtv0: Decoder revision: 0x02020023 >> ivtv i2c driver #0: Test OK >> saa7127 1-0044: detecting saa7127 client on address 0x88 >> saa7127 1-0044: Configuring encoder >> saa7127 1-0044: Selecting 60 Hz video Standard >> saa7127 1-0044: Selecting S-Video + Composite output type >> saa7127 1-0044: Selecting Normal Encoder Input >> saa7127 1-0044: Enable Video Output >> saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) >> tveeprom 1-0050: Hauppauge model 48134, rev J342, serial# 6563634 >> tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20) >> tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) >> tveeprom 1-0050: audio processor is MSP4418 (idx 25) >> tveeprom 1-0050: decoder processor is SAA7115 (idx 19) >> tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter >> ivtv0: Autodetected Hauppauge WinTV PVR-350 >> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) >> saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c >> driver #0) msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver >> #0) msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is >> autodetect and autoselect >> ivtv0: Registered device video0 for encoder MPEG (4 MB) >> ivtv0: Registered device video32 for encoder YUV (2 MB) >> ivtv0: Registered device vbi0 for encoder VBI (1 MB) >> ivtv0: Registered device video24 for encoder PCM audio (1 MB) >> ivtv0: Registered device radio0 for encoder radio >> ivtv0: Registered device video16 for decoder MPEG (1 MB) >> ivtv0: Registered device vbi8 for decoder VBI (1 MB) >> ivtv0: Registered device vbi16 for decoder VOUT >> ivtv0: Registered device video48 for decoder YUV (1 MB) >> ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) >> tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 >> FR5)) ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 >> ivtv: ====================== NEXT CARD ====================== >> ivtv1: Autodetected Hauppauge card (cx23416 based) >> ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 19 (level, low) -> IRQ 18 >> ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) >> ivtv1: Encoder revision: 0x02060039 >> ivtv i2c driver #1: Test OK >> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) >> saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c >> driver #1) msp3400 2-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver >> #1) msp3400 2-0040: MSP4418G-A2 supports nicam and radio, mode is >> autodetect and autoselect >> tveeprom 2-0050: Hauppauge model 32054, rev B148, serial# 2758742 >> tveeprom 2-0050: tuner model is LG TP18PSB11D (idx 48, type 29) >> tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04) >> tveeprom 2-0050: audio processor is MSP4418 (idx 25) >> tveeprom 2-0050: decoder processor is SAA7115 (idx 19) >> tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter >> ivtv1: Autodetected Hauppauge WinTV PVR-250 >> ivtv1: Registered device video1 for encoder MPEG (4 MB) >> ivtv1: Registered device video33 for encoder YUV (2 MB) >> ivtv1: Registered device vbi1 for encoder VBI (1 MB) >> ivtv1: Registered device video25 for encoder PCM audio (1 MB) >> tuner 2-0061: type set to 29 (LG PAL_BG (TPI8PSB11D)) >> ivtv1: Initialized Hauppauge WinTV PVR-250, card #1 >> ivtv: ==================== END INIT IVTV ==================== >> >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
