Scott wrote: > I have followed the instructions at > http://marc.info/?l=linux-video&m=119834005505084&w=2 > > and i get invalid EEPROM errors in the dmesg
This is probably a problem with driving the I2C bus on the board, which a number of users are experiencing. The problem manifestation appears to be dependent on the system the card is installed in. There has been some discussion on the ivtv-devel list. To make the cx18 driver work for all systems reliably, it would help if we can start to understand why it fails for some people. (I can't reproduce the problem on my system). I think the problem is PCI bus related (my opinion), so a work around for the problem outside of the cx18 driver could involve PCI bus latency timer configuration or removing devices or drivers that make heavy use of the PCI bus. In addition to the dmesg output you provided, can you provide the output of the following as root: # lspci -tv # lspci -vvvxxx # lsmod Also, if you can experiment with running your system (text mode if necessary) without the modules for the NVidia card and/or the Gigabit Ethernet card loaded, and see if you can modprobe cx18 with different results. > > /dev/video0 does not exist after a modprobe cx18 > > > modprobe tveeprom debug=1 > modprobe ivtv newi2c=1 > > [83546.876646] ivtv: Start initialization, version 1.2.0 > [83546.877594] ivtv: End initialization newi2c doesn't apply to cx18. What are you trying to convey here with ivtv? Do you have an ivtv supported CX23415/6 card? -Andy > i would appreciate any help so i can get this thing working. > > -Scott > > > dmesg > [ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc > version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue > Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic) > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fc0000 (usable) > [ 0.000000] BIOS-e820: 0000000017fc0000 - 0000000017ff8000 (ACPI data) > [ 0.000000] BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > [ 0.000000] 0MB HIGHMEM available. > [ 0.000000] 383MB LOWMEM available. > [ 0.000000] Entering add_active_range(0, 0, 98240) 0 entries of 256 used > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] Normal 4096 -> 98240 > [ 0.000000] HighMem 98240 -> 98240 > [ 0.000000] early_node_map[1] active PFN ranges > [ 0.000000] 0: 0 -> 98240 > [ 0.000000] On node 0 totalpages: 98240 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 > [ 0.000000] Normal zone: 735 pages used for memmap > [ 0.000000] Normal zone: 93409 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 0 pages used for memmap > [ 0.000000] DMI 2.3 present. > [ 0.000000] ACPI: RSDP signature @ 0xC00FF980 checksum 0 > [ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI ) > [ 0.000000] ACPI: RSDT 17FF0000, 002C (r1 GATEWA N0CPP063 20010820 > MSFT 1011) > [ 0.000000] ACPI: FACP 17FF1000, 0074 (r1 GATEWA N0CPP063 20010820 > MSFT 1011) > [ 0.000000] ACPI: DSDT 17FE0000, 3189 (r1 GATEWA N0CPP063 4 > MSFT 100000B) > [ 0.000000] ACPI: FACS 17FF8000, 0040 > [ 0.000000] ACPI: SSDT 17FE3189, 0035 (r1 GATEWA N0CPP063 1 > MSFT 100000B) > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] Allocating PCI resources starting at 20000000 (gap: > 18000000:e6c00000) > [ 0.000000] Built 1 zonelists. Total pages: 97473 > [ 0.000000] Kernel command line: > root=UUID=be1f9796-aca7-4102-9e75-729c87f81745 ro quiet splash > [ 0.000000] Found and enabled local APIC! > [ 0.000000] mapped APIC to ffffd000 (fee00000) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) > [ 0.000000] Detected 1496.436 MHz processor. > [ 16.635721] Console: colour VGA+ 80x25 > [ 16.636078] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 16.636479] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 16.651498] Memory: 377868k/392960k available (2015k kernel code, > 14560k reserved, 915k data, 364k init, 0k highmem) > [ 16.651516] virtual kernel memory layout: > [ 16.651518] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) > [ 16.651520] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 16.651522] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB) > [ 16.651524] lowmem : 0xc0000000 - 0xd7fc0000 ( 383 MB) > [ 16.651526] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) > [ 16.651528] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB) > [ 16.651530] .text : 0xc0100000 - 0xc02f7e86 (2015 kB) > [ 16.651535] Checking if this processor honours the WP bit even in > supervisor mode... Ok. > [ 16.651598] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, > CPUs=1, Nodes=1 > [ 16.731593] Calibrating delay using timer specific routine.. 2996.19 > BogoMIPS (lpj=5992381) > [ 16.731634] Security Framework v1.0.0 initialized > [ 16.731645] SELinux: Disabled at boot. > [ 16.731667] Mount-cache hash table entries: 512 > [ 16.731899] CPU: After generic identify, caps: 3febfbff 00000000 > 00000000 00000000 00000000 00000000 00000000 > [ 16.731924] CPU: Trace cache: 12K uops, L1 D cache: 8K > [ 16.731929] CPU: L2 cache: 256K > [ 16.731934] CPU: Hyper-Threading is disabled > [ 16.731938] CPU: After all inits, caps: 3febfbff 00000000 00000000 > 0000b080 00000000 00000000 00000000 > [ 16.731959] Compat vDSO mapped to ffffe000. > [ 16.731981] Checking 'hlt' instruction... OK. > [ 16.751841] SMP alternatives: switching to UP code > [ 16.752229] Freeing SMP alternatives: 11k freed > [ 16.752801] Early unpacking initramfs... done > [ 17.332384] ACPI: Core revision 20070126 > [ 17.332465] ACPI: Looking for DSDT in initramfs... error, file > /DSDT.aml not found. > [ 17.335024] ACPI: setting ELCR to 0200 (from 0e20) > [ 17.335815] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07 > [ 17.335825] SMP motherboard not detected. > [ 17.339850] Uhhuh. NMI received for unknown reason 2d on CPU 0. > [ 17.339916] Do you have a strange power saving mode enabled? > [ 17.339975] Dazed and confused, but trying to continue > [ 17.443362] Brought up 1 CPUs > [ 17.443577] Booting paravirtualized kernel on bare hardware > [ 17.443675] Time: 3:06:22 Date: 03/10/108 > [ 17.443714] NET: Registered protocol family 16 > [ 17.443889] EISA bus registered > [ 17.443910] ACPI: bus type pci registered > [ 17.444072] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 > [ 17.444076] PCI: Using configuration type 1 > [ 17.444079] Setting up standard PCI resources > [ 17.446690] ACPI: EC: Look up EC in DSDT > [ 17.452981] ACPI: Interpreter enabled > [ 17.452991] ACPI: (supports S0 S1 S3 S4 S5) > [ 17.453027] ACPI: Using PIC for interrupt routing > [ 17.461555] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 17.461589] PCI: Probing PCI hardware (bus 00) > [ 17.461898] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO > [ 17.461905] PCI quirk: region 0500-053f claimed by ICH4 GPIO > [ 17.462679] PCI: Transparent bridge - 0000:00:1e.0 > [ 17.462723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 17.462908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > [ 17.465214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 > 12 14 15) *0, disabled. > [ 17.465413] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 > 12 14 15) > [ 17.465604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 > 12 14 15) *0, disabled. > [ 17.465796] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 > 12 14 15) > [ 17.465988] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 > 12 14 15) *0, disabled. > [ 17.466181] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 > 12 14 15) > [ 17.466372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 > 12 14 15) *0, disabled. > [ 17.466565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 > 12 14 15) > [ 17.466814] ACPI: Power Resource [FDDP] (off) > [ 17.466878] ACPI: Power Resource [URP1] (off) > [ 17.466940] ACPI: Power Resource [LPTP] (off) > [ 17.466966] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 17.466989] pnp: PnP ACPI init > [ 17.467008] ACPI: bus type pnp registered > [ 17.471564] pnp: PnP ACPI: found 12 devices > [ 17.471570] ACPI: ACPI bus type pnp unregistered > [ 17.471578] PnPBIOS: Disabled by ACPI PNP > [ 17.471677] PCI: Using ACPI for IRQ routing > [ 17.471683] PCI: If a device doesn't work, try "pci=routeirq". If it > helps, post a report > [ 17.475734] NET: Registered protocol family 8 > [ 17.475739] NET: Registered protocol family 20 > [ 17.475898] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved > [ 17.475905] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved > [ 17.475910] pnp: 00:0b: iomem range 0x100000-0x17ffffff could not be > reserved > [ 17.475914] pnp: 00:0b: iomem range 0x0-0x0 could not be reserved > [ 17.479289] Time: tsc clocksource has been installed. > [ 17.506555] PCI: Bridge: 0000:00:01.0 > [ 17.506559] IO window: disabled. > [ 17.506567] MEM window: f4800000-f48fffff > [ 17.506573] PREFETCH window: dc500000-dc5fffff > [ 17.506584] PCI: Bridge: 0000:00:1e.0 > [ 17.506589] IO window: d000-dfff > [ 17.506597] MEM window: f4900000-feafffff > [ 17.506604] PREFETCH window: dc600000-ec6fffff > [ 17.506628] PCI: Setting latency timer of device 0000:00:1e.0 to 64 > [ 17.506652] NET: Registered protocol family 2 > [ 17.543327] IP route cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 17.543399] TCP established hash table entries: 16384 (order: 5, > 196608 bytes) > [ 17.543572] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > [ 17.543723] TCP: Hash tables configured (established 16384 bind 16384) > [ 17.543729] TCP reno registered > [ 17.555522] checking if image is initramfs...<6>Switched to high > resolution mode on CPU 0 > [ 18.102244] it is > [ 18.696892] Freeing initrd memory: 7212k freed > [ 18.697434] audit: initializing netlink socket (disabled) > [ 18.697453] audit(1207796782.724:1): initialized > [ 18.701644] VFS: Disk quotas dquot_6.5.1 > [ 18.701766] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 18.701960] io scheduler noop registered > [ 18.701965] io scheduler anticipatory registered > [ 18.701968] io scheduler deadline registered > [ 18.702006] io scheduler cfq registered (default) > [ 18.702066] Boot video device is 0000:02:09.0 > [ 18.702371] isapnp: Scanning for PnP cards... > [ 19.059125] isapnp: No Plug & Play device found > [ 19.149575] Real Time Clock Driver v1.12ac > [ 19.149734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing enabled > [ 19.149860] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 19.152023] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 19.153667] RAMDISK driver initialized: 16 RAM disks of 65536K size > 1024 blocksize > [ 19.154079] input: Macintosh mouse button emulation as > /class/input/input0 > [ 19.154262] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > [ 19.158105] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 19.158117] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 19.158532] mice: PS/2 mouse device common for all mice > [ 19.158764] EISA: Probing bus 0 at eisa.0 > [ 19.158811] EISA: Detected 0 cards. > [ 19.158974] TCP cubic registered > [ 19.158999] NET: Registered protocol family 1 > [ 19.159120] Testing NMI watchdog ... CPU#0: NMI appears to be stuck > (2->2)! > [ 19.238872] Using IPI No-Shortcut mode > [ 19.239150] Magic number: 4:118:108 > [ 19.239939] Freeing unused kernel memory: 364k freed > [ 19.298498] input: AT Translated Set 2 keyboard as /class/input/input1 > [ 20.630951] AppArmor: AppArmor > initialized<5>audit(1207796784.724:2): type=1505 info="AppArmor > initialized" pid=1108 > [ 20.647569] fuse init (API version 7.8) > [ 20.658973] Failure registering capabilities with primary security > module. > [ 21.826870] SCSI subsystem initialized > [ 21.837904] libata version 2.21 loaded. > [ 21.844642] ata_piix 0000:00:1f.1: version 2.11 > [ 21.844719] PCI: Setting latency timer of device 0000:00:1f.1 to 64 > [ 21.844851] scsi0 : ata_piix > [ 21.844942] scsi1 : ata_piix > [ 21.845143] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 > bmdma 0x0001ffa0 irq 14 > [ 21.845149] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 > bmdma 0x0001ffa8 irq 15 > [ 21.868979] usbcore: registered new interface driver usbfs > [ 21.869026] usbcore: registered new interface driver hub > [ 21.869080] usbcore: registered new device driver usb > [ 21.870890] USB Universal Host Controller Interface driver v3.0 > [ 22.010693] ata1.00: ATA-6: WDC WD1200JB-00GVA0, 08.02D08, max UDMA/100 > [ 22.010701] ata1.00: 234441648 sectors, multi 16: LBA48 > [ 22.026687] ata1.00: configured for UDMA/100 > [ 22.154988] Floppy drive(s): fd0 is 1.44M > [ 22.226289] FDC 0 is a post-1991 82077 > [ 22.345163] ata2.00: ATAPI: HITACHI DVD-ROM GD-8000, 0008, max UDMA/66 > [ 22.345177] ata2.00: limited to UDMA/33 due to 40-wire cable > [ 22.517077] ata2.00: configured for UDMA/33 > [ 22.517278] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00G > 08.0 PQ: 0 ANSI: 5 > [ 22.523564] scsi 1:0:0:0: CD-ROM HITACHI DVD-ROM GD-8000 > 0008 PQ: 0 ANSI: 5 > [ 22.524131] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 > [ 22.524138] PCI: setting IRQ 5 as level-triggered > [ 22.524144] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI > 5 (level, low) -> IRQ 5 > [ 22.524163] PCI: Setting latency timer of device 0000:00:1f.2 to 64 > [ 22.524169] uhci_hcd 0000:00:1f.2: UHCI Host Controller > [ 22.524420] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned > bus number 1 > [ 22.524458] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000ef40 > [ 22.524681] usb usb1: configuration #1 chosen from 1 choice > [ 22.524737] hub 1-0:1.0: USB hub found > [ 22.524750] hub 1-0:1.0: 2 ports detected > [ 22.556703] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors > (120034 MB) > [ 22.556748] sd 0:0:0:0: [sda] Write Protect is off > [ 22.556753] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 22.556786] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 22.556938] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors > (120034 MB) > [ 22.556959] sd 0:0:0:0: [sda] Write Protect is off > [ 22.556963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 22.556995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 22.557005] sda: sda1 sda2 < sda5 > > [ 22.601056] sd 0:0:0:0: [sda] Attached SCSI disk > [ 22.610008] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 22.610354] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 22.625331] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 > [ 22.625339] PCI: setting IRQ 9 as level-triggered > [ 22.625344] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI > 9 (level, low) -> IRQ 9 > [ 22.625363] PCI: Setting latency timer of device 0000:00:1f.4 to 64 > [ 22.625369] uhci_hcd 0000:00:1f.4: UHCI Host Controller > [ 22.625422] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned > bus number 2 > [ 22.625457] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80 > [ 22.625634] usb usb2: configuration #1 chosen from 1 choice > [ 22.625693] hub 2-0:1.0: USB hub found > [ 22.625707] hub 2-0:1.0: 2 ports detected > [ 22.669255] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray > [ 22.669264] Uniform CD-ROM driver Revision: 3.20 > [ 22.669739] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 22.729068] r8169 Gigabit Ethernet driver 2.2LK loaded > [ 22.729375] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 > [ 22.729417] PCI: setting IRQ 11 as level-triggered > [ 22.729423] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKF] -> GSI > 11 (level, low) -> IRQ 11 > [ 22.729658] eth0: RTL8110s at 0xd8818c00, 00:06:4f:22:bf:6d, XID > 04000000 IRQ 11 > [ 22.864688] usb 1-2: new low speed USB device using uhci_hcd and > address 2 > [ 22.952134] Attempting manual resume > [ 22.952141] swsusp: Resume From Partition 8:5 > [ 22.952144] PM: Checking swsusp image. > [ 22.952378] PM: Resume from disk failed. > [ 23.010418] kjournald starting. Commit interval 5 seconds > [ 23.010442] EXT3-fs: mounted filesystem with ordered data mode. > [ 23.038378] usb 1-2: configuration #1 chosen from 1 choice > [ 29.664951] iTCO_vendor_support: vendor-support=0 > [ 29.666781] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) > [ 29.666923] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460) > [ 29.667000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 29.682804] intel_rng: Firmware space is locked read-only. > <4>intel_rng: If you can't or > [ 29.682809] don't want to <4>intel_rng: disable this in firmware > setup, and <4>intel_rng: if > [ 29.682813] you are certain that your <4>intel_rng: system has a > functional > [ 29.682815] RNG, try<4>intel_rng: using the 'no_fwh_detect' option. > [ 29.756843] Linux agpgart interface v0.102 (c) Dave Jones > [ 29.760834] agpgart: Detected an Intel i850 Chipset. > [ 29.765079] agpgart: AGP aperture is 64M @ 0xf0000000 > [ 29.937288] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 30.045342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 31.006564] input: PC Speaker as /class/input/input2 > [ 31.383385] Linux video capture interface: v2.00 > [ 31.476180] cx18: Start initialization, version 0.1.0 > [ 31.476281] cx18-0: Initializing card #0 > [ 31.476287] cx18-0: Autodetected Hauppauge card > [ 31.476319] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKH] -> GSI > 9 (level, low) -> IRQ 9 > [ 31.476337] cx18-0: Unreasonably low latency timer, setting to 64 > (was 32) > [ 31.476602] cx18-0: cx23418 revision 01010000 (B) > [ 31.605258] tveeprom 0-0050: Huh, no eeprom present (err=-121)? > [ 31.605267] tveeprom 0-0050: Encountered bad packet header [07]. > Corrupt or not a Hauppauge eeprom. > [ 31.605272] cx18-0: Invalid EEPROM > [ 31.811053] input: PS/2 Generic Mouse as /class/input/input3 > [ 31.813909] parport_pc 00:09: reported by Plug and Play ACPI > [ 31.813970] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > [ 31.941505] tuner 1-0043: chip found @ 0x86 (cx18 i2c driver #0-1) > [ 31.941547] tda9887 1-0043: creating new instancels > /lib/firmware/2.6.22-14-generic/ | grep cx23418 > v4l-cx23418-apu.fw > v4l-cx23418-cpu.fw > v4l-cx23418-dig.fw > > [ 31.941551] tda9887 1-0043: tda988[5/6/7] found > [ 32.009093] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) > [ 32.009161] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) > [ 32.022452] lirc_dev: IR Remote Control driver registered, at major 61 > [ 32.033051] > [ 32.033054] lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $ > [ 32.033059] lirc_atiusb: Paul Miller <[EMAIL PROTECTED]> > [ 32.037317] lirc_dev: lirc_register_plugin: sample_rate: 0 > [ 32.058023] lirc_atiusb[2]: X10 WTI RF receiver on usb1:2 > [ 32.067209] usbcore: registered new interface driver lirc_atiusb > [ 32.138843] nvidia: module license 'NVIDIA' taints kernel. > [ 32.245940] cx18-0: Disabled encoder IDX device > [ 32.246076] cx18-0: Registered device video0 for encoder MPEG (2 MB) > [ 32.246081] cx18_dvb_register() > [ 32.246085] DVB: registering new adapter (cx18) > [ 32.536068] s5h1409_readreg: readreg error (ret == -121) > [ 32.536155] cx18: frontend initialization failed > [ 32.536480] cx18-0: DVB failed to register > [ 32.536572] cx18-0: Registered device video32 for encoder YUV (2 MB) > [ 32.536635] cx18-0: Registered device vbi0 for encoder VBI (1 MB) > [ 32.536707] cx18-0: Registered device video24 for encoder PCM audio > (1 MB) > [ 32.536768] cx18-0: Registered device radio0 for encoder radio > [ 32.537246] cx18-0: Error -12 registering devices > [ 32.537719] tda9887 1-0043: destroying instance > [ 32.539445] cx18-0: Error -12 on initialization > [ 32.539458] cx18: probe of 0000:02:0b.0 failed with error -12 > [ 32.539494] cx18: End initialization > [ 32.540105] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI > 11 (level, low) -> IRQ 11 > [ 32.540454] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-7185 > Mon Apr 2 18:29:54 PDT 2007 > [ 32.907378] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > [ 32.907387] PCI: setting IRQ 10 as level-triggered > [ 32.907392] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI > 10 (level, low) -> IRQ 10 > [ 32.907431] Vortex: init.... <6>done. > [ 33.659993] gameport: AU88x0 Gameport is pci0000:02:0c.0/gameport0, > speed 1084kHz > [ 34.359572] lp0: using parport0 (interrupt-driven). > [ 34.620901] Adding 1124508k swap on /dev/sda5. Priority:-1 extents:1 > across:1124508k > [ 35.026225] EXT3 FS on sda1, internal journal > [ 38.477886] input: Power Button (FF) as /class/input/input4 > [ 38.484772] ACPI: Power Button (FF) [PWRF] > [ 38.546728] input: Sleep Button (CM) as /class/input/input5 > [ 38.553464] ACPI: Sleep Button (CM) [SBTN] > [ 38.604662] No dock devices found. > [ 43.373239] r8169: eth0: link up > [ 43.891724] NET: Registered protocol family 10 > [ 43.892038] lo: Disabled Privacy Extensions > [ 58.344722] NET: Registered protocol family 17 > [ 72.156210] eth0: no IPv6 routers present > > > ls /lib/firmware/2.6.22-14-generic/ | grep cx23418 > v4l-cx23418-apu.fw > v4l-cx23418-cpu.fw > v4l-cx23418-dig.fw _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
